Reviews Pvc Diaphragm Valve

SPW Hunter Premium Valve Manifold System PGV101GS with Flow Control - Heavy Duty Action Machining Parts - 3/4'' or 1'' Slip PGV-101 (4 Zone)

  • Premium Manifold with Hunter 1" Slip Valves With Flow Control. DryConn waterproof connectors and a flashlight keychain included!.
  • The Action inlet and all outlets fittings can accept 3/4" PVC pipe OR 1" PVC Coupling for 1" Pipe. Action Manifold parts are premium, rugged, heavy-duty, AND made in the USA!.
  • Action Machining manifold systems are constructed out of thick schedule 80 PVC. O-Ring sealed for tool-less installation. 235 Max W.P. @ 73°. Buttress thread for a strong seal. Fully unionized..
  • Never cut your system apart again to change a junk valve and easily expand your manifold system..
  • Hunter PGV valve are high-grade, corrosive and UV-resistant PVC construction, glass reinforced jarring and a rugged double-beaded, leak-proof diaphragm with support to prevent stress failure.
Check Stock

Rittenhouse Hypro D30 BlueFlex Diaphragm and Valve Repair Kit - Complete D30REPAIRBLUE

  • Hypro D30 BlueFlex Diaphragm and Valve Repair Kit - Complete - D30REPAIRBLUE.
  • Works on the Hypro D30, D30AP-A, and D30GRGI Diaphragm Pumps.
  • Kit includes 2 x BlueFlex Diaphragms (# 9910-620082), 1 x BlueFlex Accumulator Diaphragm (# 9910-550194), 1 x BlueFlex Suction Diaphragm (# 9910-650671), 4 x Valves (# 9910-1409050), 4 x Valve O-Rings (# 9910-620030), 1 x Sight Glass O-Ring (# 9910-180101).
  • BlueFlex material redefines diaphragm durability, even under the toughest operating conditions.
Check Stock

Scubapro MK19 EVO/D420 Dive Regulator System

  • The MK19 EVO first stage with air balanced diaphragm is paired with the next-generation D420 balanced second stage for natural breathing and diving comfort in all dive scenarios..
  • Air-balanced Progressive Flow Control Valve delivers abundant airflow with an natural smoothness comparable to breathing above water..
  • Inner winglets within the D420's case direct airflow towards the exhaust valve dramatically improving exhalation effort, while a diaphragm lower in the casing takes advantage of the pressure gradient in the upright position for easier breathing..
  • The Dive/Pre-Dive System adjusts the direction of the airflow right out of the valve by adjusting the thumb tab switch on top of the casing..
  • Ideal for waters containing lots of suspended particles or silt, the compact MK19 EVO first stage's air-balanced diaphragm delivers effortless airflow unaffected by depth, tank pressure, or breathing rate..
Check Stock

Forged Stainless Steel Diaphragm Valve 316l Tri-Clamp Diaphragm Valve Silicone Seal 1.5 Inch for Controlling Ultra-Pure Sterile Corrosive Or Abrasive Fluids

  • ♛ SPECIFICATION - medium temperature: -10°C~+150°C.
  • sealing material: EPDM, PTPE, silicone resin.
  • surface polishing accuracy um: external Ra .
  • ♛ CONTROL FLUID - This forged/cast stainless steel diaphragm valve is suitable for controlling ultrapure, sterile, corrosive or abrasive fluids..
  • ♛ WORKING PRINCIPLE - stainless steel diaphragm valve is sealed from harsh fluids by high-quality neutral chemical diaphragms for a variety of applications..
  • ♛ APPLICABLE PLACES - The stainless steel diaphragm valve can be used in different fields such as food, beverage, pharmaceutical, biotechnology, semiconductor industry and so on..
  • ♛ THE PACKAGE CONTAINS - 1 valve.If you have any questions, you can contact KOUGER customer service, we will give you a satisfactory answer within 24 hours!.
Check Stock

Flexible Operation Clamp Valve Rust-Resistant Sampling Valve Petroleum for Metallurgy Chemical Water Heating

  • Made of high quality SUS304 stainless steel, this sampling valve is durable and rust-resistant.
  • Simple structure, beautiful shape, quick to install and uninstall, flexible operation.
  • The fluid resistance is small, safe and reliable to use.
  • Standard design, the sampling valve is composed of three parts, valve, handle and diaphragm.Rubber diaphragm on the valve stem works as a tensile plug.
  • Widely used for industrial fields of dairy products, cosmetics, food, pharmacy, beer, chemical, petroleum, metallurgy, water heating, food, pharmaceutical, etc.
Check Stock

Clamp Valve Small Fluid Resistance Sampling Valve 304 Stainless Steel Quick to Uninstall for Chemical Petroleum

  • Made of high quality SUS304 stainless steel, this sampling valve is durable and rust-resistant.
  • Simple structure, beautiful shape, quick to install and uninstall, flexible operation.
  • The fluid resistance is small, safe and reliable to use.
  • Standard design, the sampling valve is composed of three parts, valve, handle and diaphragm.Rubber diaphragm on the valve stem works as a tensile plug.
  • Widely used for industrial fields of dairy products, cosmetics, food, pharmacy, beer, chemical, petroleum, metallurgy, water heating, food, pharmaceutical, etc.
Check Stock

Sampling Valve Quick to Install Small Fluid Resistance Clamp Valve Water Heating for Metallurgy Petroleum Chemical

  • Made of high quality SUS304 stainless steel, this sampling valve is durable and rust-resistant.
  • Simple structure, beautiful shape, quick to install and uninstall, flexible operation.
  • The fluid resistance is small, safe and reliable to use.
  • Standard design, the sampling valve is composed of three parts, valve, handle and diaphragm.Rubber diaphragm on the valve stem works as a tensile plug.
  • Widely used for industrial fields of dairy products, cosmetics, food, pharmacy, beer, chemical, petroleum, metallurgy, water heating, food, pharmaceutical, etc.
Check Stock

TABODD Air Operated Double Diaphragm Pump QBY-15Z 1/2 inch Outlet Inlet 12 GPM Pneumatic Transfer Pump 115 PSI Industrial Pump Pneumatic Double Diaphragm Pump for Chemical Waste Oil Cast Iron

  • A diaphragm pump (also known as a Membrane pump) is a positive displacement pump that uses a combination of the reciprocating action of a rubber, thermoplastic or teflon diaphragm and suitable valves on either side of the diaphragm to pump a fluid..
  • In the pump two symmetrical working chamber each equipped with a diaphragm, the center link will be integrated into one. Compressed air from the pump inlet into the valve, through the valve body to introduce compressed air into one of the chamber to promote movement of the diaphragm chamber, while the other chamber gas emissions..
  • Once the end of the stroke is reached, the gas distribution mechanism automatically introduces compressed air into the other working chamber to push the diaphragm in the opposite direction so that the two diaphragms move back and forth in unison..
  • EXCELLENT CONSTRUCTION - Resists corrosion for reliable performance and long life. Bolted construction is designed for leak-free fluid handling. Easy access to ball checks and fluid caps for maintenance and repairs..
  • VERSATILE USE - The diaphragm pump with convenient operating are widely used in various industries, such as petroleum, metallurgy, mining, coating material, printing, paper making, water treatment, automotive etc..
Check Stock

304 Stainless Steel Clamp Valve Quick to Uninstall Sampling Valve Quick to Install for Metallurgy Chemical Petroleum Water Heating

  • Made of high quality SUS304 stainless steel, this sampling valve is durable and rust-resistant.
  • Simple structure, beautiful shape, quick to install and uninstall, flexible operation.
  • The fluid resistance is small, safe and reliable to use.
  • Standard design, the sampling valve is composed of three parts, valve, handle and diaphragm.Rubber diaphragm on the valve stem works as a tensile plug.
  • Widely used for industrial fields of dairy products, cosmetics, food, pharmacy, beer, chemical, petroleum, metallurgy, water heating, food, pharmaceutical, etc.
Check Stock

1pc 2inch Sampling Valve Ferrule Sanitary Stainless Steel Valve Quick Sampling Rubber Diaphragm

  • 【High Quality Material】The sampling valve is made of high-quality SUS304 stainless steel, chemically stable, durable and anti-rust.
  • 【Food Grade】During the sampling process, our food grade hygienic sealing rubber ring and smooth inner wall can ensure that the medium is pollution-free and the sampling is convenient.
  • 【Precision Construction】The sampling valve consists of a simple valve, a handle and a diaphragm. The rubber diaphragm on the valve stem is used as a tension plug when obtaining a sample of the medium in the pipeline or equipment, which is convenient to use.
  • 【Widely Used】Our grab valve is suitable for industrial fields of dairy products, cosmetics, food, pharmacy, beer, chemical, petroleum, metallurgy, water heating, food, pharmaceutical, etc..
  • 【Specifications】Surface Finishing: Mirror polish--Pressure: Normal pressure--Connection Type: Fast clamp connection--Ferrule Size: 50.5mm/2in.
Check Stock