Reviews Punch And Weld

Eastwood Pneumatic Perfect Panel Prep Tool 18 20 Gauge Sheet Metal TIG MIG Butt Welds Creates Clean Holes

  • Exclusive Patent Pending Design, Which Easily Provides A Perfectly Beveled 45° Weld-Prepped Edge In 20 Or 18 Gauge Sheet Metal.
  • Proper Weld-Prepped Edges Allow Strong, Flush, Crack-Free Welds In Sheet Metal.
  • The Convenient Hole Punch Feature Provides Clean, Burr-Free 0.19” Holes.
  • Each Strike Forms A Perfect 0.062” X 45° Beveled Flange.
  • Achieve Solid, Full-Penetration MIG Or TIG Butt Welds.
Check Stock

Blair Equipment 11090 Rotabroach Cutter Kit

  • Blair Weld Cutter Kit includes: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, and 3/4" cutters, arbor, hex wrench, center punch, and extra pilot.
  • For heavy-duty use in sheet metal & materials up to 1/2" thick.
Check Stock

Ingersoll Rand 9501 4-Inch Edge Series Hammer Chisel Set

  • Built from high-quality steel for the utmost in quality, strength, and durability.
  • 4-piece set includes the following chisels: tapered punch, panel cutter, flat chisel, spot weld breaker..
  • Pair with your Ingersoll Rand 114GQC Edge Series Air Hammer for any of your cutting needs..
  • Item Package Dimension: 9.0" L x 5.5" W x 1.0" H.
Check Stock

S&F STEAD & FAST Spot Weld Cutter Kit 3/8 Threaded Shank Depth of Cut 1/4 Cutting Diameter 5/16” 3/8 7/16” 1/2 9/16” 5/8 3/4 Annular Cutter Set for Hand Drill Small Angular Cutter Bits

  • PREMIUM HSS STEEL Drill bit cutters with thick walls made of super hard M2AL High Speed Steel (HRC 66), designed for wear resistance and superior performance.
  • FAST CUTTING AND LONG LIFE Premium spot weld cutters drill 3 times faster than twist drill bits or double sided cutters and last much longer.
  • ASSORTMENT Small annular cutters with 3/8” threaded shank, cutting diameter of 5/16”, 3/8", 7/16”, 1/2", 9/16”, 5/8, 3/4", suitable for cutting up to 1/4” depth.
  • APPLICATIONS Spot face cutter can be used not only for spot weld cutting in auto body panels but also for general hole cutting in sheet metal, piping, conduit, electrical, automotive and HVAC work. Materials suitable for cutting: steel plate, aluminum, cast iron, stainless steel, plastic, laminated materials.
  • STURDY CASE Includes Cutter x 7, Arbor x 1, Pilot pin x 2, Center punch x 1, Small washer x 1, Large washer x 1, Hex wrench x 1.
Check Stock

Weld On Grab Chain Hook G70 3/8\ Weld On Chain Grab Hooks Bucket Flatbed Trailer Wrecker Tow Tie Down Forged Steel Working Load Limit: 6600 lbs

  • Weld-on Type, Grab, Hook. Working load limit 6600 lb.. Size 3/8 inch, Grade 70, for use with 3/8 in chain.
  • The best hook-used for welding on the tractor bucket, it is very suitable for any field of use, and can be used with the following statements: weld on hooks weld chain hook weld on clevis weld-on clevis grab chain hooks weld tow hook weld hooks for buckets forks weld hook3/8 weld hook grab hooks 3/8weld on grab hook weldable hooks weldon hooks weld clevis hook 3/8weld on chain hooks.
  • Grab hooks work well with chains and ratchet binders for securing your load or for tow anchors..
  • Material: Forged Steel，Package Includes:4pcs hooks.
  • Note: Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. We make every effort to provide customers with satisfactory service. Feel free contact us by emails if you have any problems..
Check Stock

Single Tab Weld Nut with Target - Spot Weld Nuts 5/16-18 - Weld Nuts/Spot/Offset Hole - Low Carbon Plain Steel (10)

  • 10 Pack 5/16-18 Spot Weld Nuts - Single Tab - With Target.
  • This Tab Spot Weld Nut is a recessed electrode guide greatly facilitates welding to thin materials. It is ideal for use when a self-locating spot-weld nut is needed. This weld nut can be used in restricted areas such as corners, channels, and other confined areas..
  • This Tab Spot Weld Nut is extremely versatile and will provide a robust spot weld connection in a wide range of applications and conditions. If your product or application has fastener space constraints, you should consider the use of this weld nut..
  • This weld nut has a narrow body that is well suited for use in confined areas..
  • The weld nut features a strong single button projection which gives a deeper, more penetrating weld than is ordinarily obtained from other types of projections..
Check Stock

J-B Weld Original Epoxy, Steel Reinforced Epoxy, High Strength - 2 Pack, Dark Grey (8265S-2)

  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces. Perfect for DIY household, automotive, marine, craft repair and much more..
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey..
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid..
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

J-B Weld 8265S Original Cold-Weld Steel Reinforced Epoxy - 2 oz.

  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more..
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey..
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid..
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
  • Will set in 4-6 hours, and cure in 16-24 hours.
  • Waterproof, petroleum, chemical, and acid resistant when fully cured.
Check Stock

J-B Weld 8272 MarineWeld Marine Epoxy - 2 oz.

  • J-B WELD MARINEWELD: A two-part epoxy cold weld system that provides strong, lasting repairs to multiple surfaces. Perfect for all DIY marine and watercraft repairs..
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 16-24 hours to cure. Once cured J-B Weld MarineWeld can be tapped, filled, sanded, molded and drilled. J-B Weld MarineWeld’s set and cure color is dark grey..
  • VERSATILE AND DEPENDABLE: J-B Weld MarineWeld is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, MarineWeld is waterproof and resistant to petroleum, chemical and acid. It retains strength above & below water..
  • SURFACE APPLICATIONS: Aluminum, Fiberglass, Metal, Plastic/Composite, Wood..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

Plast-aid Multipurpose Repair Plastic - 6 oz Kit

  • J-B WELD MARINEWELD: A two-part epoxy cold weld system that provides strong, lasting repairs to multiple surfaces. Perfect for all DIY marine and....
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 16-24 hours to cure. Once cured J-B Weld MarineWeld can be....
  • VERSATILE AND DEPENDABLE: J-B Weld MarineWeld is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees....
  • SURFACE APPLICATIONS: Aluminum, Fiberglass, Metal, Plastic/Composite, Wood..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld....
Check Stock