Reviews Pulling Block

Heavy Duty 4 Ton 8800 lb Snatch Block Recover Winch Pulley Snatch Block for Winches Double Winch Capacity

  • Fits up to 5/16" winch wire rope. No disassembly required: the pulley swivels open to accept line. Fast attachment: 3" holes. Measures: 10-1/4" x 5"..
  • Load tested to 8818 lb (4 Ton), 3/16" thick high tensile strength steel pulley wheel with black powder-coated, smooth pulleys and quiet if pulled on-axis..
  • When you need your winch to perform powerfully, this snatch block is your go-to accessory, allows better angles during difficult pulls. Winch pulley block feature is prevent the cable from bunching up on one side of the drum during angled pulls and can also double your pulling power..
  • Winching with this snatch block pulley can also reduce amp load and prevents winch overheating, increases and preserves winch motor life..
  • Double the pulling capacity of your ATV/UTV/Truck winch. Use for towing, climbing, warehouse, home and industrial uses..
Check Stock

OTC 7948 Silver Slapper 10-Way Slide Hammer Puller Set with Storage Case

  • OTC's 7948 'Silver Slapper' 10-Way Slide Hammer Puller Set with Storage Case allows you to pull flange-type rear axles, remove stubborn oil seals and bearings and other press-fit parts.
  • Jaws can be set up for 2 or 3-way internal or external pulling for the ultimate in tool flexibility.
  • Includes: 1155 Slide Hammer with 5 lb. hammer and 'T' handle, 7372 - Rear Axle Pulling Attachment, 24544 - 3-Way Cross Head, 24545 - Cone, 27241 - 2-Way Cross Block, 27315 - Puller Hook Attachment.
  • 34698 - 3ea. Pulling Jaws for internal/external use.
  • 4148 - 3ea. 6-1/2 inch Pulling Jaws for internal/external use.
  • 32054 - 3ea. 2-3/8 inch Pulling Jaws for internal use.
  • 05378 - Grip Wrench Adapter w/single lead (wrench not included).
  • 205377 - Dent Puller, 309321 - Forcing Screw.
  • durable blow-molded case keeps set components contained and organized.
Check Stock

Portable Winch PCW3000-FK Forestry Assortment Kit

  • Portable Winch PCW3000-FK Forestry Assortment Kit.
  • Includes (1) PCW3000 Portable Winch, (1) PCA-0102 Transport Case, (1) PCA-1205M Double-Braided Polyester Rope (164' x 3/8"), (1) PCA-1255 Rope Bag, (1) PCA-1260 Polyester Sling, (1) PCA-1275 Stainless Steel Swing Side Snatch Block, (2) PCA-1276 Steel Oval Locking Carabiners, (1) PCA-1282 Grab Hook, (1) PCA-1290 Skidding Cone, (1) PCA-1295 Choker Chain.
  • PCW3000 Max. Pulling Force: 1550 lb. (750 kg).
  • For foresters, loggers, and woodlot owners.
Check Stock

Portable Winch PCW4000-HK Hunting Assortment Kit

  • Portable Winch PCW4000-HK Hunting Assortment Kit.
  • Includes (1) PCW4000 Portable Winch, (1) PCA-0106 Transport Bag, (1) PCA-1205M DBP Rope (164' x 3/8"), (1) PCA-1255 Rope Bag, (1) x PCA-1260 Polyester Sling, (1) PCA-1261 Hitch Plate Winch Anchor, (1) PCA-1275 Stainless Steel Swing Side Snatch Block, (2) PCA-1276 Steel Oval Locking Carabiners, (1) PCA-1282 Grab Hook, (1) PCA-1372 HPPE Rope Choker.
  • Max. Pulling Force: 2200 lb. (4400 lb. when doubling line).
  • Honda GX50cc 4-stroke 2.0 HP gas engine powered.
Check Stock

Slide Hammer, Orion Motor Tech 9-Way Internal/External Slide Hammer Puller Set - Pulls Hubs, Rear Wheel Axle Shafts, Bearings, Bushings, Seals, Retainers

  • VERSATILE PULLER SET: The Orion Motor Tech 9-Way Slide Hammer Puller Set with 5 lb slide hammer is ideal for many pulling applications like flange-type rear axles, most front-wheel drive hubs, pulling dents, and other press-fit parts (bearings, bushings, gears, pulleys, etc.)..
  • INTERNAL & EXTERNAL JAWS: Includes 2-jaw and 3-jaw pullers for internal and external work to provide a variety of combinations to pull bearing, gears, and seals. 2 and 3-way cross blocks and cone-type puller provide the perfect jaw configuration for most jobs..
  • MULTI-FUNCTION: Includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements. All the tools are contained in a heavy-duty organizer case to extend the life of your tools..
  • ULTIMATE DURABILITY: Built to last with rugged carbon steel alloy and chrome vanadium steel components, our tool kit can withstand accidental drops and years of heavy use without cracking or rusting..
  • ALL-IN-ONE TOOL SET: Complete 15 piece set for a wide range of pulling applications, including: Slide Hammer, Puller Head, Pulling Adapter, Cross Block, Internal/External Puller Jaw, Hex Jaw Nuts & Screws (3), Vise-Grip Adapter (single-lead thread), Seal Hook, 3-Way Puller Head, Cone, Self-Tapping Screw and....
Check Stock

OTC Puller Set, 11 Pieces, Multipurpose, 2 Jaws - 4532

  • Push puller is the best pulling choice when threaded holes are not available.
  • Great solution for many applications like: heavy-duty pinion bearings, side bearings, alternators, generators, power steering and crankshaft pulleys, timing gears, harmonic balancers, and more.
  • Features a classic 'H Bar' style puller block accommodating a 7 inch to 11 inch application spread.
  • Comes with 2 sets of forged jaws for a pulling reach range of 5 inches to 9 inches.
  • two forcing screws are included for short and long pulls.
  • durable blow-molded storage case keeps tools contained and organized so they are ready when you need them.
Check Stock

JOMBULL 9-Way Slide Hammer Puller Set, 19 pcs Rear Wheel Axle Hub Dent Shaft Puller, Slide Hammer Bearing Puller for Hub Seal

  • 【Durable】 Our 9-way slide hammer puller set is made of heat-treated forged steel, polished and chrome-plated to resist rust and wear, extending the service life..
  • 【Application】 The axle hub dent shaft puller is widely used for flanged rear axles, most front wheel drive hubs, pulling dents and other press fit parts..
  • 【Easy to operate】 You only need to install the axle hub dent puller on the part you want to remove, when pulling the T-handle, transfer the force to the shaft, the shaft drives the connecting end to pull out the part, repeat the above steps, the hub or bearing will be easily removed..
  • 【What you get】 Our 9-way slide hammer puller set includes, slide hammer, puller head, pulling adapter, cross block, inner/outer pulling jaw, hex jaw nuts and screws (3pcs), Vise-Grip adapter (single lead thread), sealing hook, 3-way puller head, cone, self-tapping screw and retainer..
  • 【Safe storage】 The slide hammer bearing puller comes in a blow molded case, sturdy and durable, and each piece has precisely sized compartments, easy to store and carry..
Check Stock

Heavy Duty 4 Ton 8800 lb. Capacity Universal Black Snatch Block Recover Winch Pulley ATV UTV by Alfa Wheels (1)

  • DOUBLE YOUR PULLING POWER: Redirect or Increase 2x in Winch Pulling Power. Keep it as Part of your Off Road Kit in your ATV, UTV, Truck. Ideal for Towing, Don’t go four Wheeling without it.
  • NO DISASSEMBLY REQUIRED:  The Pulley Swivels Open to Accept Line. For Use with  up to 5/16" Winch Wire Rope. Fast Attachment. 3" Holes. Measures 10-1/4" x 5".
  • PREMIUM GRADE QUALITY: 3/16" Thick High Tensile Strength Steel with powder paint Finish, Heavy Duty, Dowel Bearing.
  • EXTRA BENEFITS: Reduces Winch Load and Heat, Increases and Preserves Winch Motor Life, Helps Increase Pulling Power Using a Double Line Pull Technique. It is used for indirect pulls using the block as an anchor point, too.
  • WORRY - FREE WARRANTY: We take customer Satisfaction very Seriously. That's why all our products are backed up with a 1 Year Money Back Guarantee.
Check Stock

GearAmerica Aluminium Ultra Snatch Block – 40,000 lbs Minimum Breaking Strength, 20,000 lbs Working Load Limit – for Synthetic Winch Lines and Soft Shackles – Red

  • Off-Road Like a Pro: Effortlessly recover any stuck vehicle by changing the direction of your pull.
  • perfect for navigating around trees or other obstacles and getting your ATV, UTV or 4x4 back on the trail.
  • Ease the Strain and Increase Pulling Power: Increase the lifespan of your winch motor and double its pulling power.
  • our Ultra Snatch Blocks are recommended for winches up to 20,000 lbs capacity.
  • Designed For Synthetic Winch Line: Especially designed for Synthetic Rope up to ⅝” (16mm) and soft shackles, this pulley won’t cause your line or shackles to fray or deteriorate.
  • Not recommended for steel cable or d-ring shackles.
  • Half the Weight, Double the Capacity: With a hefty 40,000 LBS Minimum Breaking Strength (20,000 LBS Recommended Working Load Limit), our aluminum, rust-proof Ultra Snatch Block has double the capacity of a standard steel snatch block with only half the weight.
  • Purchase with Confidence: All GearAmerica products include our industry-leading Hassle-Free Lifetime Replacement Warranty.
Check Stock

INCLAKE Snatch Block (Max 4.8 Ton 10,500LBS) Winch Pulley Block 10,500lbs Capacity, Rope Diameter Up to 10mm 0.4 Inch for UTV ATV Recovery or Industrial Use

  • The UTV and ATV snatch block will increases winch pulling power highly..
  • The snatch block is made of High-tensile strength steel with epoxy grade finish..
  • The snatch block is for climbing, warehouse and home uses, self weight is 2.29 pounds..
  • The winch pulley's swivels open to accept line with no disassembly..
  • The winch pulley measures 5.7 in. x 3.1 in. with Max 10,500 pound capacity..
Check Stock