Reviews Pulley Clutch Belt - BestBuyersPro.com

40 Series Go Kart Torque Converter Kit for Manco 2432 for Many 8HP-18HP Engines

The ROP Shop replacement 40 Series Go Kart Torque Converter Kit for Manco 2432 for Many 8HP-18HP Engines.
Specs - 7 1/2" Diameter. 3/4" Bore. 3/16" Key. Engagement Range: 1600- 3300 RPM. Refer to images 2 & 3 for more information.
Includes - (1) Backplate, (1) Integrated Jackshaft, (1) 10T Sprocket, (1) 1" Driver Clutch Pulley, (1) 3/4" Driven Clutch Pulley, (1) Drive Belt, (1)....
Fits 8HP-18HP Go Kart engines with 1" Straight Crankshaft & 1/4" Keyway, if this converter kit is used on engines larger than 18hp, the belt will burn....
For some units, the driven clutch will need flipped around when mounted, please refer to image 7 for reference.

Modified TAV2/30 Series: Our go-kart torque converter is the latest TAV2/30 asymmetrical series. The asymmetrical type system can reduce engine load and gain more power to bring your off-road machine back to life..
Updated Durable Belt: The new type of belt, go-kart asymmetrical belt 669, is one of the highlights for our torque converter for go-karts. Using this excellent elastic belt properly can improve the life span of your torque converter..
Quality Drive Clutch: We have a 3/4” Driver Pulley and a 5/8” bore driven pulley. They are made of aluminum and steel. And it also can fit for 4-8 hp small torque converter systems..
Vehicle Fitment: The torque converter is compatible with 3/4″ & 5/8″ straight crankshaft. You can usually use it on 4-8 hp go-karts and motorbikes..
Full Accessories: Our torque converter clutch has full accessories: 1 x 3/4″ driver pulley. 1 x 5/8″ bore driven pulley. 1 x plastic assy cover. 1 x aluminum mounting plate. 1 x driver belt. 1 x full mounting hardware..

The ROP Shop replacement 103 HPQ Drive Clutch.
Specs - Clutch Type: 103 HPQ (High Performance Quad). Refer to images 2 & 3 for more information.
This 103 HPQ clutch allows for a quicker shift out and a greater top end speed. This clutch has a larger diameter pulley and greater sheave angles than OEM to provide more ratio and less wear on the drive belt and sheave faces. The increased angle of the sheaves means smoother up shift because the moveable face pushes (not pinches) the belt to the outer diameter of the clutch. Reported performance enhancements of 25% over the OEM clutch with performance kits is typical.
This clutch does NOT have the EBS feature, but will fit models with EBS. Operator can use this clutch but will NOT have the EBS feature. When installing you will need to use an 18mm bolt with a 2.5 thread pitch in order to remove the clutch.

-Designed for superior fit, performance and durability.Designed and manufactured to exacting specifications which meet or exceed OEM belt performance..
-These high-performance belts provide maximum power-transmission and superior clutch/variator torque-multiplier response..
-Without clutch recalibration - Matches belt shift curves and pulley speed ratios with minimal slip under extreme-torque conditions..
-Zero clutch/variator spring or fly-weight adjustment required at installation.Tuned your CVT system to get more performance from your machine..
-Model specific trapezoidal top-notch designs improve heat-dissipation for cooler belt and primary/secondary clutch operation..

【30 Series Torque Converter and Go Kart Drive Belt】：New 30 Series 6.5 HP Go Kart/Mini Bike Torque Converter Clutch Driver Pulley Replacement Comet Manco 212CC. Recommended engine: 2HP-8HP. Interchanges with part numbers 219552A 30 Series Torque Converter Driver Clutch.3/4″ Bore Max Torque, with 30 Series Go Kart Drive Belt Replace Manco 5959 / Comet 203589..
【Torque Converter】：This 3/4″ Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque converter 30 series..
【Wide Use–torque converter 3/4】: Small engine Torque Converter clutches are heavily used in go karts, mini bikes, and lawn mowers.For Go Kart, Mini Bike, Lawnmower, small tractors, Fun Kart, Golf Karts, mini choppers, ATV, motorcycles, and waterski winches etc..
【Go Kart Drive Belt】: 30 Series Go Kart Drive Belt torque converter belt Replaces For manco 5959/comet 203589 murray 12-8487 baja Motorsports BB65-395 ken-Bar 300-009 255-299 rotary 8487. Width: 0.4″, Length: 27-1/32″..
【Wide Use–go kart clutch belt】: The go-kart drive belt used on most Manco, American Sportworks and Ken-bar Karts with 5hp-7hp engines.Also used on the Comet TAV2 bolt on torque-a-verter kit.Center to center spacing for the driver and driven pulley ne....

Cool Coil Technology, Heavy Duty "FatBoy Series" Upgrade.
Replaceable Pulley Bearing, Super Smooth "Xtreme Precision" Machined Pulley.
Upgraded to 4 Layer "Xtreme TOUGH" Integrated, Water Tight Wire Harness - with Xtreme's "Integrated Diode".
Specs: Description: PTO Clutch, 1.125" Crankshaft, 6.3" Pulley, Counter Clockwise, A/B Belt, 200 ft. lbs. torque.
Replaces OEM Numbers: Bad Boy: 070-1000-00, Stens: 255-775.

【Brand new predator 212cc 6.5 hp go kart torque converter clutch kit】 This 3/4" Torque Converter is a direct replacement kit for the most popular....
【TAV2 30 Series Go Kart Clutch Kit】This torque converter fits a 3/4" shaft and comes with your choice of a 10 tooth sprocket for a 40/41 chain or....
【30 Series Toruqe Converter Belt for 6" Driven】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75").....
【This clutch will help you get more power out of your small engine by reducing engine load】 A torque converter acts similar to a transmission,....
【For your convenience this kit comes with】1 x 3/4" Driver Pulley.

【Fitment 】Replace OEM Part Number：2875911.
The clutch drive belt removal tool for Polaris 2016-2019 RZR XP Turbo / 2016-2019 RZR-4 XP Turbo /....
【Practical Function 】The belt change tools helps prevent damage to the pulley or belt during installation or removal..
【High Quality Material 】The clutch drive belt removal tool is made of great metal, high quality and very durable..
【Package includes 】Metal clutch drive belt removal tool*2.
【After-sales service】100% Brand New. Every product has been strictly tested and tested. If you have any questions, please feel free to contact....

Specs: ID: 1". Height: 3". Pulley dia: 7 3/16". Belt width: 1/2" Or 5/8". Rotation direction: Counter clockwise. Designed for rugged use. For Proper Ordering, Reference Warner or Ogura part numbers stamped on clutch. To prevent premature clutch failure, Follow the instruction sheet included with the clutch. Made by: an OEM supplier.

Specs: ID: 1". Height: 3 1/8". Pulley dia: 6 5/16". Belt width: 1/2" Or 5/8". Pigtail: Included. Rotation direction: Counter clockwise. Designed for rugged use. For Proper Ordering, Reference Warner or Ogura part numbers stamped on clutch. To prevent premature clutch failure, Follow the instruction sheet included with the clutch. Made by: an OEM supplier.