Reviews Ptfe Tube For 75mm Filament

Upgrade 3D Printer Accessories with All Metal Extruder Feeder, Capricorn Bowden Tubing, Pneumatic Couplers, Bed-Level Springs for Creality Ender 3/Ender 3 Pro/Ender 5 Pro/Ender 5 Plus Ender 3 Upgrades

  • 3D Printer Extruder – Instantly provide improved print quality and reduce filament slipping by firmly grasping the filament between two threaded wheels locked together. No more skipped steps when extruding at high speeds or after retractions. Print faster with this superior design, which is able to feed much more filament into the hotend in the same period of time than stock plastic extruders..
  • 100% Original Capricorn XS Bowden Tube for 1.75mm filament – Capricorn ptfe tube is regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. It is rated for withstanding the highest temperature in the market which is perfect for printing filaments such as PLA, PETG, ABS, Nylon. Fits for 1.75mm 3d printer Filament..
  • Creality Die Springs – Those springs are extra firm and help to hold the bed level for longer while being more resistant against wearing out and loosing compression. Level the bed once and it should hold for more prints with these high performance stiff springs. PC4-M6 & PC4-M10 pneumatic fittings are also included for replacement use on any stock creality hotends..
Check Stock

Wangdd22 E3D V6 Hot End Full Kit 1.75mm 12V Bowden/RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

  • Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall.
  • Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking.
  • Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality....
  • Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm.
  • Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 Pcs brass....
Check Stock

OIIKI 5 PCS HT-NTC 100K Temperature Thermistor 3D Printer Parts Sensor High Temperature +260 Degrees 2 Pins Thermistor for Reprap 3D Printer MK3 Extruder Heater Block

  • Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall.
  • Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking.
  • Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality....
  • Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm.
  • Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 Pcs brass....
Check Stock

Twotrees J-Head V6 Hot End Full Kit 1.75mm 12V RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

  • 【1】Applicability & compatibility: compatible with all 1.75mm V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall..
  • 【2】Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking ..
  • 【3】Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly ..
  • 【4】Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm ..
  • 【5】Package include: all metal V6 hotend 12v / 40w / 1.75mm / 0.4mm extruder full kit (V6 printhead + fan + fan cover + PTFE tube + pipe fitting), 1 pieces brass extrusion nozzles (1×0.4mm ) and a v6 heating block, a 2-part Teflon tube in the nozzle neck made of stainless steel..
Check Stock

ENOMAKER Upgrade All Metal Extruder Kits Rotary Feeding Knob 1M Capricorn Bowden Tubing 4 Hot Bed Leveling Spring Pneumatic Fitting 3D Printer Kits

  • 【All Metal MK8 Bowden Extruder Kit】The grey extruder feeder drive is made of high quality aluminium alloy, with stronger and adjustable extrusion....
  • 【1M Capricorn Bowden Tubing】Premium XS series PTFE tube for 1.75mm filament,low frition,heat resistant to 300°C, auti-carbonize, with extremely....
  • 【Upgrade Bed Leveling Springs】Yellow compression mould die springs, length 25mm, it is longer and have more adjustment range,stiffer than the....
  • 【Rotary Feeding Knob】Easier and smoother to load filament without worrying about it scraping or breaking..
  • 【Compatible】for all-metal MK8 extruder feeder drive 1.75mm. Such as Ender 3/Pro/V2/Max,Ender 5/Pro/Plus,CR-10 Series, CR-10S(Excludes 10s pro and....
Check Stock

Creality Capricorn Bowden Tubing 1M Bowden PTFE Tube for 1.75mm Filament with Teflon Tube Cutter 2X PC4-M6 Extruder Fitting & 2X PC4-M10 Hotend Fitting for Ender 3 V2/3/3 Pro/5/CR-10/10S 3D Printer

  • GENUINE UPGRADES: Creality Capricorn XS Serious Bowden PTFE tubing is the lowest friction premium tubing on the market with faster response, less....
  • COMPATIBLE WITH MORE FILAMENTS: This bowden tube is reinforced with a proprietary blend of high-performance additives that can withstand higher....
  • SMOOTHER FILAMENT OUTPUT: Designed for 1.75mm filament, Creality capricorn tubing has extremely accurate inner & outer diameter, and filament loads....
  • BEST ENDER SERIES ACCESSORIES: Teflon tube length: 1 Meter, Inner Diameter: 1.95mm ± 0.05mm , Outer Diameter: 2mm. The optimal inner diameter size is....
  • GREAT PACKAGE: Package comes with two PC4-M6 fittings for the extruder and two PC4-M10 coupler for the hot end, Its 4mm inner diameter is used for the....
Check Stock

AMX3d PTFE Teflon Bowden Tube for 1.75 Filament (2.0mm ID/4.0mm OD) 2.0 Meters – White Connector Tubing for 3D Printer

  • IMPROVE PRINTS: Regular Bowden tube cleaning can cause wear, and extruder grinding reduces print quality. Replace your filament tubing to enhance print quality..
  • LOW FRICTION: Made from high quality, durable PTFE, the Teflon Bowden tube allows filament to slide better for smoother results..
  • HIGH SPEC: Withstanding temperatures up to 260C, this Bowden connector tubing has a density of 2.15-2.20g/cm3, with a 2mm ID and 4mm OD..
  • FLEXIBLE TUBING: PTFE Bowden tubes offer impressive flexibility – ideal for smoothly tracking the moving 3D printer head. Packaged without ties to prevent crimping..
  • AMX3D ACCESSORIES: The best 3D Prints start with the best tools! AMX3d provides 3D printing partsof the highest quality. If there are any problems with your Bowden Tube just let us know!.
Check Stock

Redrex Ender 3 All Metal Bowden Extruder Tension Adjustable with Tube and Stiff Bed-Leveling Springs for Ender 3,Ender 5,CR10 Series 3D Printers

  • All Metal Extruder Replacement for Ender 3 Ender 5 CR10 Series:This durable aluminum extruder frame works more stable than plastic parts..
  • Adjustable Extrusion Spring Tension Design: The extrusion spring tension could be adjusted by tighten the screw..
  • Upgraded Stiff Bed Leveling Springs:It provides stronger tension and longer sevice life than the stock ones..
  • High Quality Bowden Tube :It was made of highly purified PTFE(Poly Tetra Fluoro Ethylene) material,it feeds the filament smoothly..
  • Recommend filament materials:PLA/ABS/Wood/Hips/Flexible/PTEG,40 Teeth drive gear feeds the 1.75mm filament very smoothy..
Check Stock

Creality Capricorn Bowden Tubing XS Series 1.2M for 1.75MM Filament, with Upgraded PC4-M6 & PC4-M10 Pneumatic Fittings & Hot Bed Die Springs, PTFE Teflon Bowden Tube for Ender 3V2/3/3 Pro 3D Printer

  • 100% Genuine Capricorn XS Bowden TubingCapricorn Premium XS bowden Tubing is enhanced with a proprietary blend of high performance additives. It was developed specifically for 1.75mm filament with an extremely precise 1.9mm 0.05mm internal diameter. Reduces the "wiggle room" or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems..
  • Less FrictionHigh Lubricity Additives makes Capricorn XS Series tubing has the lowest friction than other ordinary bowden tube. More responsiveness, less retraction, more accurate prints, less slippage, wear,and tear on the extruder, and less clogging when printing chunky filaments..
  • Higher Temperature ResistanceHigh Temperature Resistance due to using only the highest quality PTFE. Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. it stands the highest standards for PTFE tubing in all of 3D printing..
  • PC4-M6 And PC4-M10 FittingsPC4-M6 fittings thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of premium copper and plastic, sturdy and durable. PC4-M10 fittings: thread M10/6mm, inner diameter(bla....
Check Stock

Creality Ender 5 Pro 3D Printer Upgrade Silent Motherboard and Metal Feeder Extruder with Capricorn Bowden PTFE Tube

  • 【Upgraded V4.2.2 silent Mainboard】Ender 5 pro Upgrade Motherboard Silent Mainboard with TMC2208 Driver.
  • 【Metal Extruder Frame】Creality Ender 5 Pro 3D Printer is a highly durable metal extruder . This feature provides stronger pressure while pushing filament through the 3D Printer's nozzle.
  • 【Premium PTFE Tube-High】The Capricorn Bowden PTFE Tubing has a 1.9mm ± 0.05mm inner diameter, reducing any excess wiggle room and preventing the filament from buckling inside of the tube.
  • 【Cube Frame 3D Printer】Ender 5 Pro has a rigid extruded aluminum cube frame, making it very sturdy when assembled properly, which goes a long way to increasing print quality.
  • 【1-year warranty】We have equality warranty and provide after-sale customer service for the product. If any quality issue, Please feel free to contact us via Amazon, we will offer professional instructions and solutions timely..
Check Stock