Reviews Ptfe Rod Production Line

LTI Universal 10ft Nylon Stainless Steel Braided 5/8\ AN10 PTFE E85 Fuel Line Hose Injection (BLACK, 10AN)

  • This PTFE Nylon Braided Fuel Hose are specially designed to work in any automotive project. this hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility..
  • PTFE Nylon Braided fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high temperature high pressure applications..
  • Application: fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes. Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Pressure Rating: Maximum Working Pressure (psi): 2000 psi. Bursting Pressure (psi): 6000psi..
  • This hose is made of high-quality PTFE on the inside that gives them high chemical and heat resistance, along with a braided Black Nylon outside which gives them high durability, extreme pressure resistance, and Professional installation is highly recommended..
  • 10AN PTFE E85 Fuel Hose Length: 10ft. Inner Diameter: 0.5" (12.95mm). Outside Diameter: 0.62" (16mm) . Please measure before purchase! Fit for AN PTFE hose end fitting ONLY..
Check Stock

SINTLY 8AN 90 Degree PTFE Hose End AN8 for PTFE E85 Fuel Line Fitting Adapter Blue&Red 2 PCS

  • 【Tips】8AN PTFE hose end can be work with PTFE fuel line ONLY.It can NOT be installed on braided CPE fuel line..
  • 【Size】Thread Size of 8AN PTFE Fitting 90 Degree is 3/4-16UNF and the PTFE fuel line which works with should be 1/2"..
  • 【Included】2 PCS x PTFE 8AN Fitting 90 Degree.
  • 【Attention】100% product quality assurance. Please feel free to contact us, if you are dissatisfied with the product you received or have quality problems..
  • SINTLY Provide plently kind of fuel fittings, swivel, push-on lock, PTFE hose end and other fitting adapters..
Check Stock

EVIL ENERGY 6AN PTFE Hose End Fitting 90 Degree Black for PTFE Hose Only

  • Please Attention that the 6AN PTFE hose end can be work with PTFE fuel line ONLY..
  • Thread Size of 6AN PTFE Fitting is 9/16-18UNF and work with PTFE fuel line(Hose ID: 0.31 inch OD: 0.43-0.47 inch)..
  • The PTFE hose end is reusable, just  replace a new ferrule if you reinstall the fitting..
  • EVIL ENERGY Provide plently kind of fuel fittings, Swivel, push-on lock, PTFE hose end and other fitting adapters..
  • Warrany: EVIL ENERGY provide PTFE hose end 6-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

New All Balls Fuel Pump Module 47-1029 Compatible With/Replacement For Can-Am Outlander DPS 450 EFI, Outlander DPS 570 EFI 2016-2020, Outlander L 450 EFI 2015-2016, Outlander L 500 EFI 2015

  • ➰APPLICATION- All fuel, lube, alcohol, ethanol, coolant and gas for automotive and marine. Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high-temperature and high-pressure applications..
  • ➰WORKING ENVIRONMENT-Maximum Working Pressure=725 psi(5 mpa). Bursting Pressure=2175psi(15 mpa). Working Temperature Range=-40℉ to 392℉(-40℃ to 200℃)..
  • ➰SIZE- length=20 feet. Inner diameter=0.51 inches (12.95 mm). Outer diameter=0.63 inches (16 mm)..
  • ➰MATERIAL- Inner layer: PTFE (Teflon) rubber.
  • middle layer: 304 stainless steel wire mesh sleeve.
  • outer layer: braided nylon. PTFE fuel lines are more resistant to high temperature and pressure..
  • ➰NOTE- PTFE hoses are relatively hard and cannot be bent or folded in half.Double check the hose size before ordering.Professional installation is highly recommended..
Check Stock

MECCANIXITY PTFE Lab Stirrer Bearing Adapter 21.5mm to 25mm Stopper for 8mm Diameter Shaft Stirring Rod

  • PTFE Lab Stirrer Bearing Adapter is used for fixing electric stirring rods in a flask to stir a liquid or solution in the biology and chemistry field, research laboratory applications, etc..
  • In the package of: 1 x PTFE Lab Stirrer Bearing Adapter.
  • Made of PTFE material, corrosion-resistant and has good resistance to high temperature(temperature tolerance range:-180 °C~250 °C), smooth surface, easy to clean..
  • It is detachable, comes with a sealing o-ring for good sealing performance. Easy to use, usually used with double-paddle PTFE electric stirring rod..
  • Please check if this size is what you need..
Check Stock

TIKSCIENCE 6AN E85 PTFE Fuel Line 20FT Hose Kit - Hose ID 0.315inch - Nylon Braided Fuel Injection Line for Automobiles or Marine Engines, for Racing Cars and Motor Racing Bikes - 10 Fittings

  • Fitment - ID: 5/16". OD: 0.465inch.Length: 20 feet(6M). Please measure before purchase! (Includes: as shown in the picture.).
  • High Quality Material - The hose is made of high-quality PTFE, which has good chemical resistance and heat resistance. The outer layer is woven black nylon, which has high durability, extreme pressure resistance, and a professional and high-tech appearance..
  • High Performance - The high-performance AN-6 nylon and stainless steel braided high-pressure PTFE fuel line kit is much more resistant to high temperatures and extreme environments. The PTFE lined hose is compatible with all vehicle fuels, lubricants and coolants. Teflon hoses are relatively hard and cannot be bent..
  • Warm Tips - 1.Avoid twisting hose when installing 2.Allow some slack in assembly for changes in length that occur underpressure 3.When routing hose line, provide a smooth bend radius.4.Avoid sharp bends which may cause hose tocollapse and restrict flow..
  • Package Include - AN-6 Black Nylon PTFE Fuel Hose x 20ft, AN-6 Straight PTFE Fitting x 4, AN-6 45 degree PTFE Fitting x 2, AN-6 90 deg....
Check Stock

MECCANIXITY PTFE Lab Stirrer Bearing Adapter 16.5mm to 20mm Stopper for 7.7mm Diameter Shaft Stirring Rod

  • PTFE Lab Stirrer Bearing Adapter is used for fixing electric stirring rods in a flask to stir a liquid or solution in the biology and chemistry field, research laboratory applications, etc..
  • In the package of: 1 x PTFE Lab Stirrer Bearing Adapter.
  • Made of PTFE material, corrosion-resistant and has good resistance to high temperature(temperature tolerance range:-180 °C~250 °C), smooth surface, easy to clean..
  • It is detachable, comes with a sealing o-ring for good sealing performance. Easy to use, usually used with double-paddle PTFE electric stirring rod..
  • Please check if this size is what you need..
Check Stock

MECCANIXITY PTFE Lab Stirrer Bearing Adapter 21.5mm to 25mm Stopper for 8mm Diameter Shaft Stirring Rod 2Pcs

  • PTFE Lab Stirrer Bearing Adapter is used for fixing electric stirring rods in a flask to stir a liquid or solution in the biology and chemistry field, research laboratory applications, etc..
  • In the package of: 2 x PTFE Lab Stirrer Bearing Adapter.
  • Made of PTFE material, corrosion-resistant and has good resistance to high temperature(temperature tolerance range:-180 °C~250 °C), smooth surface, easy to clean..
  • It is detachable, comes with a sealing o-ring for good sealing performance. Easy to use, usually used with double-paddle PTFE electric stirring rod..
  • Please check if this size is what you need..
Check Stock

EVIL ENERGY 6AN PTFE E85 Fuel Line Hose Nylon Braided 10FT Black(5/16 Inch ID)

  • ID: 5/16". OD: 0.465inch.Length: 10 feet. Please measure before purchase!.
  • PTFE fuel line can be used as fuel injection hose, boost line,carb fuel line, ls engine swap fuel line, fuel return line, vapor return line,fuel supply line, etc..
  • Working Temperature Range: -76℉ to 446℉ (-60℃ to 230℃). Max Working Pressure: 3000 psi. Bursting Pressure: 10000psi..
  • Applicable Medium: all automotive fuels, lubricants, and coolants..
  • PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..
Check Stock

EVIL ENERGY 8AN PTFE E85 Fuel Line Hose Nylon Braided 20FT Black(0.394 Inch ID)

  • ID: 13/32". OD: 0.543inch.Length: 20 feet(6M). Please measure before purchase!.
  • PTFE fuel line can be used as fuel injection hose, boost line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, fuel supply line, etc..
  • Working Temperature Range: -76℉ to 446℉ (-60℃ to 230℃). Max Working Pressure: 2500 psi. Bursting Pressure: 8000psi..
  • Applicable Medium: all automotive fuels, lubricants, and coolants..
  • PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..
Check Stock