Reviews Ptfe Nylon Engineer Plastic
10FT 6 AN 3/8\ Nylon Stainless Steel Braided PTFE E85 Tube Fuel Line Fittings Kit with 6PCS Swivel Fuel Hose Fitting Adapters
- 【High Quality】This hose features an PTFE inner layer which is compatible with E85, wrapped by a single layer of stainless steel and nylon. These lines do not deteriorate or swell over time due to E85 use like non-PTFE fuel line. PTFE fuel line holds up a lot stronger to heat and extreme circumstances than the nylon braided fuel line..
- 【Application】The fuel line is widely used in fuel system, transmission system and cooler system and can be compatible with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel, and etc..
- 【Package Includes】The 6an nylon and stainless steel braided PTFE fuel line kit includes: 6pcs 6an PTFE hose ends (2pcs straight, 2pcs 45 degree, 2pcs 90 degree) and 3/8 PTFE braided fuel line (Length:10ft/3M)..
- 【Work Condition】The 6an PTFE hose working temperature range: -76℉ to 446℉ (-60℃ to 230℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 3000 psi. Bursting Pressure (psi): 10000psi..
- 【Service】100% satisfaction guarantee, If you have any issues with the part , simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check StockCapricorn Bowden PTFE Tubing 1M XS Series 1.75MM Filament with 2X PC4-M6 & 2X PC4-M10 Pneumatic Fittings & Tube Cutter for Creality Ender 3 V2/ Ender 3/ Ender 3 Pro/Ender 5/ CR-10/10S 3D Printer
- 100% Original Capricorn XS Series tubing..
- Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate..
- PC4-M6 Couplers: thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of premium copper and plastic, sturdy and durable. PC4-M10 Couplers: thread M10/6mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of high qulity stainless steel and plastic, high hardness, antioxidtion, anti corrosion. The extruder fittings are PC4-M6 and the hotend fittings are PC4-M10..
- One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting..
- Any questions please feel free to contact us at any time. We will reply to you within 24 hours and provide technical support for you..
Check StockAutoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft
- 【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1,6AN PTFE straight hose end*6,6AN PTFE 45 Degree hose end*2,6AN to 3/8" hose adapter fitting*2, AN6 to 3/8"quick disconnect male*1,6AN to 5/16" hose adapter fitting*1..
- 【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
- 【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
- 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
- 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....
Check StockLTI Universal 10ft Nylon Stainless Steel Braided 5/8\ AN10 PTFE E85 Fuel Line Hose Injection (BLACK, 10AN)
- This PTFE Nylon Braided Fuel Hose are specially designed to work in any automotive project. this hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility..
- PTFE Nylon Braided fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high temperature high pressure applications..
- Application: fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes. Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Pressure Rating: Maximum Working Pressure (psi): 2000 psi. Bursting Pressure (psi): 6000psi..
- This hose is made of high-quality PTFE on the inside that gives them high chemical and heat resistance, along with a braided Black Nylon outside which gives them high durability, extreme pressure resistance, and Professional installation is highly recommended..
- 10AN PTFE E85 Fuel Hose Length: 10ft. Inner Diameter: 0.5" (12.95mm). Outside Diameter: 0.62" (16mm) . Please measure before purchase! Fit for AN PTFE hose end fitting ONLY..
Check StockEVIL ENERGY 6AN 3/8 PTFE LS Swap EFI Fuel Line Fitting Kit E85 Nylon Braided Fuel Hose 25FT
- PTFE nylon braided fuel line kit mostly used in EFI LS system and can be used as fuel injection hose, ls engine swap and EFI conversion fuel line,....
- Inner Diameter: 5/16". Outside Diameter: 0.465inch. Please measure before purchase!(Includes: as shown in the picture.).
- Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. AN-6 nylon braided....
- PTFE fuel hose can be compatible with all automotive fuels, lubricants, and coolant..
- PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..
Check Stock8AN 20FT Fuel line Hose Braided Nylon Stainless Steel Oil Gas CPE Black
- 8AN 20FT Fuel line Hose Braided Nylon Stainless Steel Oil Gas CPE Black.
- Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure (psi): 2000psi. AN-8 nylon and stainless steel braided high pressure PTFE fuel line kit holds up a lot stronger to heat and extreme circumstances..
- Hose Material: Covered with high quality woven Nylon and Stainless Steel Braided + CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance.
- The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability..
- PTFE Lined Hose can be compatible with all automotive fuels, lubricants, and coolant..
- Package Includes: 1 x 8AN 20FT Nylon Braided Hose. It can't be bend and folding in half. Professional Installer is Highly Recommended. Exchange or return for free if leak..
Check StockKomelon 433IEHV 6 Pack 33ft. x 1in. The Professional Tape Measure, Chrome
- The Professional is built to perform and last. This 25' and 33' combo pack tape with our inch/engineer scale is an ergonomically designed chrome tape can complete any job.
- This durable tape by Komelon is named the professional for a reason because it's built for professionals and will deliver when put to the test.
- The Professional has a nylon coated, high visibility blade which is stopped and locked with a powerful slide lock.
- The high visibility blade is painted with a neon yellow paint to increase visibility and readability.
- Nylon coated, high visibility blade with inch/engineer scale. This tape screams quality and will deliver value.
Check StockAuthentic Creality Assembled Hotend Kit for Ender 3 / Ender 3 Pro/Ender 3 V2 with Capricorn PTFE and Upgraded Pneumatic Fittings, Thermistor, Heating Element, MK8 Sock and 4 Extra Nozzles
- ...e filament is inside. This perfect fir ensures much better results on retaction moves and helps to ensure a steadier and even flow rate from your hotend!.
- Upgraded Pneumatic fittings with metal teeth provided in this package work much better than the stock options provided by many cheap 3D printer manufacturers with plastic teeth or cheap locking mechanisms. The extruder fitting is a PC4-M6 and the hotend fitting is PC4-M10. These are the standard sizes for most open source 3D printers and the same sizes used by most Chinese manufacturers..
- 2 complimentary hotend socks are also provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and more consistency..
- F1rst Layer is proud to provide 24/7 customer support and we strive to achieve 100% customer satisfaction. If you have any questions or concerns about this product, please do not hesitate to contact us directly and we will assist with any and all questions..
Check StockSailing Jacket with Bib Pants for Men Waterproof Breathable Rain Suit Fishing Foul Weather Gear (Carbon, Large)
- 3 Layer Nylon Taslan PTFE Waterproof Breathable.
- SIZE RUN BIGGER. Use for Fishing, Sailing and Water sports. Shell Jacket with matching Bib Pants and fleece jackets. Good choice for rain gear sets in cold winter..
- All zippers are nylon YKK-brand and all have pull tabs on them. There is an inner pocket for a wallet inside the jacket on the left side that measures 8-1/2" high by 7" deep and has a zipper closure..
- Heavy duty 2-way nylon zip protected by double storm flap..
- The sleeves and collar has a 3M retroreflective piping. There are patches of retroreflective plastic material on the sleeves, shoulders, and on top of the hood. There is a hanging strap sewn into the jacket just below the collar to allow hanging from a hook. Fleece lined hand warmer pockets.
- There is a white patch to write your name into the jacket on the inside..
Check StockMelissa & Doug Fire Chief Role Play Costume Set & Construction Worker Role Play
- ...eeds of different work scenarios. Stimulate the child's imagination!.
- HIGH QUALITY - Worker costume made with Wipe-clean materials and durable fabrics, with reflective stripe, 4 pockets for tool, can hang the hammer and spanner on each side of the belt. Wear vest, helmet, goggles, bring the tools you need, be a cool engineer worker!.
- SIZE - Construction vest is one size fit for kids age 3-8 years old. Suitable for children 100cm to 130cm tall. The inner layer of the helmet has 9 holes positions that can be adjusted and fit for most kids. The construction tool toys set are the perfect sizes for kids' play. The toy tools size is basically the same as normal real objects, high simulation..
- HALLOWEEN COSTUMES GIFT FOR KIDS - Perfect for Halloween dress-up parties, kids' Halloween costumes, construction worker role play party, costume for boys, engineer costumes for kids, kids tools. Great gift for boys, girls, preschoolers and toddlers..
Check Stock