Reviews Psu For Mining

MLLIQUEA 847 Mining Motherboard, 8 GPU Slots Mining Machine System, Cryptocurrency Miner Barebone Motherboard for BTC/ETH/ZEC with SSD, RAM

  • 8 GPU Ports - The mining machine system comes with 8 GPU interfaces, and the GPU interface spacing is about 65mm. 8 GPUs can be installed on the motherboard at the same time. The actual work done for you is lasting and rewarding. This motherboard is adapted to the mining rig frame customized for B85/847 sold in our store..
  • Upgrade Material - Our mining GPU motherboard is made of high-quality steel, which is sturdy and durable, and can be reused. One large CPU cooling plate, super heat dissipation. You can install your own external cooling fan, fast heat dissipation to ensure your normal use. Can fully protect your GPU and electronic equipment from damage. Excellent equipment design to improve GPU performance. It is recommended that you buy MLLIQUEA 2000W PSU, which is sold in our store, more efficient mining..
  • Safe and Silent - It can ensure silent performance, low power consumption, reduce heat generation, energy-saving, and safe use. This is a must for mining Bitcoin (BTC), Ethereum (ETC), and any other cryptocurrency..
  • Eth Mining Rig - Motherboard: LGA(1150) CPU(with CPU radiating plate), 128GB SSD (Installed), 4G RAM, 6 PIN cable to (6 + 2) Pin 8pcs. Note: The hard disk is not equipped with a system. After you log in to the official website of the s....
Check Stock

MLLIQUEA 2500W Long-line Mining Power Supply, 2U Mining Power Supply for 8 GPU BTC/ETH Rig Miner Machine, 110V-264V PSU with 12000 RPM Violent Fan

  • Eth Mining Rig PSU – MLLIQUEA 2500W mining power supply can be the perfect tool for your cryptocurrency mining equipment. Low noise design, about 75dB. Above 110V, output rated power 2000W, above 220V, output rated power 2500W. Supports simultaneous use of multiple graphics cards. NOTE: The power supply cannot be used for ASIC miners with protocols or software. ASIC miners L3+, S9, S9i, S9K, 851/852, H0.1, H0.3 can be used..
  • Upgrade Material – Our mining PSU shell is made of high-quality steel, sturdy and durable, and reusable. The internal wire adopts an upgraded copper core, which is resistant to high temperatures and is more durable than other types of copper core wires, the external material of the power cord fully protects the wire from wear and tear and prevents the interface and graphics card from being burned, reducing your use cost..
  • Energy Saving – This power supply has a conversion efficiency of up to 89 percent , high efficiency, and energy-saving, using new large-capacity large magnetic ring materials, very stable performance, and can be equipped with more powerful mining machines, which is safer.DC circuit design, and is equipped with multiple power protections, offers your system more reliable and stable output voltages, providing ....
Check Stock

MANMEI Open Air 8 GPU Mining Rig Frame for Crypto Miner Stackable Ethereum Mining Machine 1800W Power Supply 110V-264V 8 GPU Motherboard with CPU & 128GB SSD & 8G RAM & 4 Fans Without GPU

  • Mining Rig Complete System: MANMEI mining rig is designed for crypto mining – Ethereum Classic, ETH, Litecoin, Dogecoin, Monero, Zerocoin, Ripple....
  • 110 - 264V Voltage Power Supply: Built-in 1800W PSU is specially designed for mining rig with up to 90% conversion efficiency. Wide voltage range....
  • 8 GPU Ports Mining Motherboard: Specially designed B85 mining motherboard allows you to put at most 8 Pcs graphics cards in the mining rig at same....
  • Easy & Quick Installation: With prebuild design, MANMEI B85 frame type mining machine is easy and quick to assemble. Compared with other mining rig....
  • Mining Rig System Including: B85 motherboard with CPU, 1800W Supply Power (110V - 264V input ), 128GB SSD, 8G DDR3 RAM, 4 PCS 4500 RPM Adjustable....
Check Stock

MLLIQUEA 8 GPU Ports Mining Rig, Crypto Complete Mining Frame Machine with 2500W Mining Power Supply, Barebone B75 Motherboard for ETH with 8 Cooling Fans, Miner Frame Case with PSU, RAM, SSD

  • 8 GPU Ports - The mining rig come with 8 GPU interfaces, the GPU interface spacing is 65mm. 8 GPUs can be installed on the motherboard at the same time. Compatible with AMD/NVIDIA GPUs..
  • 2500W PSU - Our EHT miner is equipped with a 2500W professional Low Decibel mining power supply (176V to 264V), with ultra-high work efficiency, and is equipped with multiple power protections..
  • Complete Mining Rig- Include 2500W PSU, B75 MB, CPU G2030, 128G SSD, 4G RAM, eight 4500 rpm fans, 8 pin cables, and screws. Compatible with Windows or OS, but need to install the system yourself..
  • Upgrade Material - MLLIQUEA mining GPU frame case is made of high-quality steel, which is sturdy and durable. Can fully protect your GPU and electronic equipment from damage and saves your use cost..
  • Effective Heat Dissipation - Upgraded version of the 8 fans with adjustable speed (2500rpm-4500rpm). If you feel that the fan is very noisy at work, you can adjust the fan speed regulator to reduce the rotation speed and reduce the noise. Low power consumption, reduce heat generation, energy-saving, and safe use. This is a must for mining Ethereum, and any other cryptocurrency..
  • Excellent Customer Service - Please read the manual before use. If you are not completely satisfied with your purc....
Check Stock

2000W Mining 2U Single Channel Power Supply, 110-230V Ethereum PSU for 8 GPU ETH Miner Rig Case

  • 【2000-2500W Mining Power Supply】 The mining power supply is mainly designed for cryptocurrency mining. The power supply has ten 6 pin power leads. Note: The power supply cannot be used for ASIC miners with protocols or software..
  • 【Single channel PSU parameters】 The miner PSU can be used in 110V-230V. Input AC110V output rated power is 2000W. Input AC220V, the output rated power is 2500W. Power efficiency is 80% at 110V, Power efficiency is 90% at 220V. Please reasonably calculate the consumption of the GPUs, and reserve 300-400W for the motherboard and other cable consumption..
  • 【Support 6-8 GPU graphics card】 Built in 60mm diameter cooling fan, with speed up to 12000 rpm, Which is conducive to heat dissipation. But the sound will be loud decibel: about 65-69 DB at no load. Support 8 PCS 3060TI/3070/6800/6800XT 6900/6900XT GPUs simultaneously. We recommend running 6 cards of 3080/3090 without overclocking the GPU..
  • 【Package】 Include 1.2m power cord, cable tie, screw. Over voltage protection, overloading protection, short circuit protection..
Check Stock

Michal Tech Mining GPU Hanger Frame for Wire Rack Pack of 2 (2 Pack)

  • PROFESSIONAL VARIATION – Heat resistant for complete open air system and for enclosed systems!.
  • SIMPLE and CONVENIENT – Compatible with almost all wire racks.
  • EASY TO INSTALL – This mining bracket is easy to install and is structurally strong. Keep your mining machine organized without spending a fortune on a mining frame. For installation steps, please refer to the user manual..
  • Full kit includes set of 2 screws and 2 hangers..
  • NOTICE – GPU’s with DVI ports may experience compatibility issues. This mining rig bracket is the Bracket Only, does not include Fans or other CPU, GPU, PSU, Motherboards, Cables, etc.. If you are not 100% happy with this product, please feel free to contact us, we will offer you a satisfactory solution within 24 hours..
Check Stock

Mining Rig Frame 8 GPU 70mm Slots with 8 Fans Crypto Ethereum Miner Case with Barebone Motherboard for ETH/ZEC Cryptocurrency System Machine with SSD/RAM Without GPU/PSU

  • 【8 GPU Mining Rig Parameter】Inter1(R) Celeron B75 Motherboard: 8X PCI-E spacing 70MM.
  • 【8 GPUs Support】8 GPU 75mm expansion slots in the mining computer case. The mining case support 8 PCS 3070/6800/6800XT 6900/6900XT GPUs....
  • 【8 Fans Support & Fan Controllers】 The cryptocurrency mining rig case is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans....
  • 【4 USB Ports】 It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. The miner case has 4 USB ports,....
  • 【Mining rig case】The rig doesn't come with GPU and PSU. Including: motherboard, CPU, power switch line, 128GB SSD, 4G RAM, 2500-4500 rpm cooling....
Check Stock

1/4 Classifier Sifting Pan Gold Panning Fits 5 Gallon Bucket Mesh Screen

  • OUR FRAME MINING MACHINE DOES NOT CONTAIN GPU.This rack-mounted miner is made of the highest quality iron material and is durable. Fully protect your....
  • B85 frame type mining machine, professional design, accelerate air convection, super heat dissipation design. Sufficient space is reserved between the....
  • Please note: This product does not include GPU, install win10 mining system (The system is not activated), including 1800W, with power cord (both 110V....
  • B85 frame type mining machine, including: motherboard, Intel CPU 1840/1820 (with CPU cooler), 128GB SSD, 4G RAM,PSU,win10 system（The system is not....
  • GPU Port Gap: the port gap between GPUs is 65mm, you can put 8pcs GPUs on the motherboard at the same time if your GPU thickness is less than 60mm,....
Check Stock

SUOHUI Ethereum Mining Rig Complete Mining Case for ETH/ETC Crypto Mining Prebuilt 8 GPU Mining Motherboard 1800W PSU 110v-220v 8 Cooling Fans 8GB RAM SSD CPU Excluding GPUs -Blue

  • ◀ Complete Installation, Start in Minutes： This GPU miner has installed high-quality mining hardware (without GPU) and Win10 English version....
  • ◀ Ultra-quiet Mining Power Supply: Built-in 4U 1800W full-voltage power supply, 110V-220V universal output to meet the use of different voltage....
  • ◀ 8 Controllable Cooling Fans: With each 4 cooling fans installed on the front and rear, the mining case fully allows the cold air in and hot air....
  • ◀ High-quality Mining Sever Case: The mining rig adapted sturdy and durable steel material to protect the GPU and electronic accessories. High....
  • ◀ SUOHUI complete mining rig case comes with an 8GPU mining motherboard, 1800W PSU, 8GB RAM, 128GB SSD, CPU (with the cooling system), 4USB ports,....
Check Stock

VTRETU 2000W Mining Power Supply 2U Miner PSU 110-264V for ETH Miner Machine, Support 8 GPU Mining rig, with 12000 RPM Powerful Fan (10 Connection Cables and 1 Power Cord Included)

  • 1, Rated Power 2000W: High power mining PSU with 8（6+2）Pin connection cords 12V output , work under full voltage （110V -264V ）. Hight efficiency with more than 80 %. Please reasonably calculate the consumption of the GPUs and reserve 300-400W for the motherboard and other cables..
  • 2, Wide Applicability: applicable to any GPU miners, stable and efficient, offering your system more reliable and stable output voltages. Note: The power supply cannot be used for ASIC miners with protocols or software..
  • 3, High-speed Cooling Fan: The 2U mining power supply uses a 60mm diameter cooling fan, up to 12000 rpm, which maximizes the heat dissipation effect. Compatible with the balance of quality, efficiency, and stability, pursuing continuous power output with high efficency but low consumption!.
  • 4, Configurations: 10 connecting cables, 8 (6 + 2) pinx16, 6pinx6, and 1 Power Cord. Cables are made with all-copper lines, providing multiple power protections against over current/over voltage/voltage regulation/short circuit/lightning/overload.
  • 5, Warm Tips: Professional power supply for min....
Check Stock