Reviews Process Flow Meters

5/16\ to 3/8\ Flow Control Needle Pinch Valve (3 Valves)

HPDMC Oil-Free Hookah Dive System Third Lung Serface Vacuum Pump for Snorkeling (550W)

• Voltage: 12V storage battery drive（battery is not included）, Power: 550W, Working Pressure: 0.8MPa / 8bar / 110psi, Flow Charging Rate: 60L/min.
• 2.0cfm, Type: Oil-free pump, no need any lubricate oil to take in, Receiver tank: 10 liters stainless steel..
• Working process: Atmosphere air is sucked into cylinder of the compressor, and compressed to reach 0.3mpa – 0.8mPa / 40 psi – 110 psi pressure, through regulator with water separator , then purified by filter. Discharge clean air for diving breathing..
• Filtration for breathing air (Active carbon filter): The outlet air purification depends on the activated carbon and molecular sieve, so filter elements must be replaced periodically, especially for breathe purpose. The deepest working distance is up to 30 meters for one hose.
• 10-15 meters for both if connects to two hoses..
• Direct driven type compressor: This air compressor is the main body of the electromechanical air source device. It is the device that converts the mechanical energy of the primary motion (usually the motor) into the gas pressure energy, and is the pressure generating device for compressed air. The pump block unit is composed of crankcase, crankshaft, cylinder, piston, intake and discharge valves, connect rod , beari....

BETOOLL HW9003 Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld

• Brand New BETOOLL Argon / CO2 regulator and flow meter..
• Flow Meters are more accurate than the flow gauge regulators..
• The pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi..
• And this flowmeter does not use a diaphragm, so it is more reliable than the flow-gauge style regulators..
• The output flow is adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube..

G3/4\ Thread Hall Effect Liquid Water Flow Sensor Switch, DN20mm Counter Meter Used for Water Heaters, Water Dispenser, Water Purifier, Coffee Maker 2-45L/Min

• Measurement Range: According to strict regulations, the measurement range of the flow switch is 60 (cubic meters/hour), which is large enough to meet daily needs..
• Durable: The water flow sensor switch is made of high-quality brass material, which is durable and has a long service life..
• Quality Assurance: This flowmeter has undergone strict quality control and testing, and the quality is guaranteed. Safe and reliable..
• Practical: High-quality water flow meters can maintain high performance for a long time, and are convenient to use in real life and have strong practicability..
• Wide Application: The flowmeter can be widely used in industrial automation, mechanical equipment, air compression industry, refrigeration, heating and ventilation and other fields..

DAE MJ-100 1\ NSF61 Lead Free Potable Water Meter, Pulse Output + Couplings, Gallons

• ...afe Drinking Water Act. Factory Calibration Certificates available. DAE Controls LLC is a Minority Business. Please feel free to get the NMSDC Minority Supplier Certificate from DAE Controls Website..
• Cloud Metering available (2nd picture) with DAE CC2030 Gateway. CC2030 will collect water usage from DAE AMR (for 16 meters) or AMR130AN (for 1 meter) and send them to cloud server through Ethernet. With PC, cell phone, the landlords can see real time data, monthly water usage & billing reports to their tenants. If there is abnormal usage (ex. Broken piping), an email alert will be sent to your cell phone. No IT guy required. Just connect wires as per a simple picture (see video) & ready to go..
• Ready for use with CO-10 (Electronic Pulse Counter) or CO-10 KIT - An inexpensive remote reading solution (6th picture). Can also use with DAE AMR130 (Auto Meter Reading Module for single water meter) and AMR (for 16 water meters) for remote reading (5th picture)..
• Accuracy: +/-1.5% within normal flow rate range as per AWWA Standard. Conforms to AWWA C708, for clean water. Safe Maximum Flow Rate: 50 GPM, Recommended Maximum Continuous Flow Rate: 25 GPM, Minimum Test Flow Rate: 0.75 GPM Normal Test Flow Limits: 3-50 GPM.

DAE AS200U-75 Water Meter, 3/4\ NPT Couplings, Measuring in Gallons

• ... Or DAE PVM-75, DAE VM-75P which can be installed in any position, vertically or horizontally, water flowing downwards or upwards, dial facing upwards, downwards or side-way..
• For upgraded AS200U-75P, Cloud Metering available (2nd picture) with DAE CC2030 Gateway. CC2030 will collect water usage from DAE AMR (for 16 meters) or AMR130AN (for 1 meter) and send them to cloud server through Ethernet. With PC, cell phone, the landlords can see real time data, monthly water usage & billing reports to their tenants. If there is abnormal usage (ex. Broken piping), an email alert will be sent to your cell phone..
• For upgraded AS200U-75P, ready for use with CO-10 (Electronic Pulse Counter) or CO-10 KIT - An inexpensive remote reading solution (6th picture). Can also use with DAE AMR130 (Auto Meter Reading Module for single water meter) and AMR (for 16 water meters) for remote reading (5th picture)..
• For product description, you can also refer to “Specification Sheet” in “Product guides and documents”. To install the DAE 3/4" water meter with the 3/4" garden hose at both ends (or one end with hose bibb and the other with garden hose), you will need 2 DAE CG-75 Fitting. Factory Calibration Certificates available. DAE Controls LLC is a Minority Business. Ple....

Gikfun DC 6V - 12V Micro Self-priming Diaphragm Pump R385 Suitable for Water Dispenser, Cooler, Small Pumping Projects EK1970

• Working voltage: DC 6-12V, Power: less than 6W, Maximum flow: 1.5-1.8L/Min.
• Power cord not included. Pump head: 5 meters, pump suction: 1.5 meters (test with water).
• The design of the silicone case has a fixed effect, and mainly plays the role of shockproof and silent..
• Micro self-priming pumps are widely used in home appliances, medical care, models, aquarium equipment, etc., mainly to achieve functions such as pumping water and cold water circulation..
• The pump provides a smooth flow over all operating ranges. It also has a self-priming function that allows it to work quietly in the application. The pump can run idling for 30 minutes. When we are doing destructive work, the continuous pumping time can reach more than 1000 hours..

Amiarc Portable Electric Drill Pump, Self Priming Water Transfer Pump Hand Drill Driven Pump Small Household Pump with Two Connectors Centrifugal Pump for Transfer Oil, Fluid Diesel, Kerosene

• Large flow - Stable performance and high efficiency. The recommended speed of our drill pump is 1500-3500 rpm. The pump head and flow are related to the speed. The higher the speed, the higher the head and flow. 1500 rpm, the pump head is about 1.5 meters, the flow is about 15L per minute. 3000 rpm, the pump head is about 3 meters, and the flow rate is about 30L per minute..
• Wide Application - Works great with most electric hand drills , Just connect water pipe with hose clamp and insert the electric drill to use the water transfer pump. Electric drill pump is suitable for transporting light liquids such as water, oil, diesel, liquid fertilizers, etc., and can also be used for car cleaning, gardens, lawn watering, pumping and drainage, etc..

Household Vertical Bladeless Cooling Electric Fan, Mobile Cooling Small Water Cooling Fan, Energy Saving and Low Noise, Evaporative Air Cooler

• No blade cooling fan, no touch screen damage, 360° annular air outlet design, no operation for 5 minutes, automatic screen cut, remote control with remote control.
• This product adopts low-noise design, 8 hours timing, reaches the set time, automatically shuts down, you can enjoy a quiet and comfortable night..
• Three kinds of wind speed prompts, three kinds of comfortable wind types are optional, the air outlet can automatically reverse when encountering obstacles, and the wind speed can reach 9 meters..
• Effective filtration to prevent secondary pollution. When blowing out cold air, it can be filtered through filters and plant fiber evaporators. It's easy to disassemble, easy to clean, and always has fresh air..
• The wind speed of the cross-flow fan can reach 9 meters: the high-quality submerged volute air duct structure, the cross-flow fan sends the air to the ring. Narrow air outlet makes air pressure more uniform, diffused air outlet avoids physical discomfort caused by direct blowing.

Dwyer® Thermo-Anemometer Test Instrument, 471B-1, Measures Air Velocity and Temperature

• Metal vane withstands temperatures up to 175?F and airspeed up to 7880 feet/minute.
• Displays air flow (CFM) or air velocity (feet/minute) plus temperature on dual display.
• Choice of readings in feet/min, meters/second, kM/hour, MPH or knots.
• Air flow displayed as instantaneous value, 2/3 value or 20 point average.