Reviews Pro Amplifier

Topping DX3 Pro+ ES9038Q2M Bluetooth 5.0 LDAC Audio Decoder DSD512 DAC AMP NFCA Headphone Amplifier Pre Amplifier (Black)

  • ...luetooth, we abandon the built-in DAC of QCC5125 and connect its digital signal to ES9038Q2M to decode..
  • NFCA circuit ：The new DX3 Pro+ has the NFCA circuit optimized for this unit, giving the ultra low noise and distortion. It pairs with high sensitivity IEMs and power hungry high impedance headphones nicely..
  • Pre-amplifier function ：Adapt to different usage scenarios, DX3 Pro+ has 4 output modes: Headphone Amp, Headphone Amp+ Line out, DAC, and Pre amplifier..
  • PA3s is the best power amplifier for DX3 Pro+： PA3s has RCA+TRS balanced inputs. When used with DX3 Pro+, the TRS balanced input can be used to input other audio sources. The output power of 80W x [email protected]Ω, 10%THD+N, 65W X [email protected]Ω, 1%THD+N can be adapted to most situations where speakers are used..
  • Bluetooth headphone amp / Bluetooth DAC application： Connect the Bluetooth of the phone, tablet or notebook to DX3 Pro+, and connect the power amplifier, active speakers or headphones to the DX3 Pro+'s output, then DX3 Pro+ becomes your Bluetooth Headphone amp / Bluetooth DAC. If your device supports LDAC transmission, you will get even better experience..
Check Stock

FiiO K9Pro Amplifier Headphone Amps Bluetooth High Resolution Desktop Portable Support Lossless Sound 384 kHz/DSD256/MQA/LDAC/AptX Adaptive/AptX HD for PC/Speaker/Home Aduio(K9Pro ESS)

  • [Supports up to 384 kHz and native DSD256]: The K9Pro ESS desktop DAC is equipped with the high performance dual ES9038PRO, supporting up to 384 kHz and native DSD256 audio..
  • [Support lossless MQA renderer]: The K9Pro ESS amplifier supports the unfolding of MQA tracks, allowing you to listen to high-resolution audio files that are not only reasonably sized, but also retain master-level sound quality that brings you directly into the recording studio..
  • [Bluetooth 5.1 and High Resolution Bluetooth]: The K9Pro ESS bluetooth headphone amps supports AAC/SBC/aptX/aptX LL/aptX HD/LDAC/aptX adaptive lossless bluetooth formats, it means you could get high resolution sound more convenient..
  • [Plentiful playing ways]: ①Front: XLR 4-pin, 4.4mm balanced, 6.35mm single-ended headphone outputs.
  • for more convenient connections to external amps or speakers.
  • ③Side: USB Type-C port, for your player, mobile phone,PC..
  • [DAC/AMP combos]: K9Pro ESS desktop amplifier can drive 600Ω power-hungry headphones. Connect to your pc, players as desktop dac, you also could play with your speaker or external amplifier..
Check Stock

FiiO K5Pro Amplifier Headphone Amps Stereo High Resolution Portable Desktop DAC 768K/32Bit and Native DSD512 for Home Audio/PC 6.35mm Headphone Out/RCA Line-Out/Coaxial/Optical Inputs (K5PRO ESS)

  • ...el of resolution sound. ES9038PRO with 32-bit processing, along with the XUF208 USB decoding chip with 768kHz and DSD256 inputs, and it also upportes mobile phone connectivity..
  • [Variety of inputs]: Supports coaxial/optical/RCA line-in inputs, with optical and coaxial inputs supporting up to 192kHz inputs, K5Pro ESS amplifier is convenient for connecting various music players and digital interfaces..
  • [Variety of outputs]: Supports 6.35mm (1/4 in.) headphone out/RCA line-out outputs, the RCA line-out line signal is adjustable up to a maximum of 2Vrms, so the K5Pro ESS portable DAC can be used with a variety of active speakers and external amplifiers..
  • [Easily handles low or high impedance headphone]: For a total power output of up to 1.5 W under a 32Ω load, and up to 20Vpp at 300Ω, K5Pro ESS desktop amplifier can easily handles any low or high impedance headphone..
  • [Various headphones with all kinds of sensitivities]: With ADC volume adjustment, K5Pro ESS portable headphone amplifier allows you to smoothly adjust volume at extremely fine increments without any undesirable noise nor with any channel imbalances. It means you could comfortably use various headphones with all kinds of sensitivities with it..
Check Stock

KGUSS DAC-K3 PRO USB DAC Headphone Amplifier Mini HiFi Optical/Coaxial/USB DAC Decoder Audio 24Bit 192KHz DA Converter ESS9018K2M Decoder Multifunctional Preamp Desktop Amplifier (Black)

  • It is both"a headphone amplifier"and"a preamp" ▶️ The DAC-K3 Pro is not only a professional headphone amplifier, but also a pre-stage. When used as a pre-stage,it can also play the same excellent performance. It can be widely used with power amplifiers or active speakers.This is a great choice for your first USB-DAC!.
  • High-performance ▶️ Chips: TPA6120A2+LME49720AN+NE5532+ES9018K2M+SA9123L. TPA6120A2 is a high-fidelity audio power amplifier based on current feedback architecture.Its distortion far exceeds that of many op amps that only process small signals. The operation amplifier LME49720AN three sections are balanced and very thick,the dynamic and low frequency strength and quantity sense is very good, the sound field is broad,the high frequency to go is very smooth.The sound is pure and real..
  • Wide Compatibility--Various Inputs Supported ▶️ The unit supports PC-USB（Can also be connected to a cell phone）, fiber-optic, coaxial, and other digital audio inputs. In addition, it is widely compatible with Windows XP/W7/W8/W10/MAC/Linux, etc. Note: Depending on the PC, the driver may not install automatically, please contact our custo....
Check Stock

Rockville Hybrid Bluetooth Karaoke Home Theater System and (4) 4\ Speakers+(2) Mics

  • Package Includes: (1) RockvilIe RPA70WBT 1000w 2-Ch USB Bluetooth Pro/Karaoke Amplifier/Mixer+(2) Mics, (2) Pair of RockvilIe HP4S-8 BK 4" Outdoor/Indoor Swivel Home Theater Speakers in Black.
  • Features of RPA70WBT: RockvilIe RPA70WBT 1000 Watt 2-Channel Pro/Karaoke Amplifier/Mixer with (2) Wireless Microphones and USB + Bluetooth, RMS Power @ 4 Ohms: 125 Watts x 2, Peak Power @ 4 Ohms: 500 Watts x 2, RMS Power @ 8 Ohms: 100 Watts x 2, Peak Power @ 8 Ohms: 400 Watts x 2, THD: 003e 0.1%, Input Sensitivity: 400mv/33 KOhm, Frequency Response: 20 Hz - 20 kHz, Signal to Noise Ratio: 80 dB, Tone Characteristic: 100 Hz - 10 kHz +/-12dB, 110v/220v switchable.
  • 19" Rack Mountable (Removable Rack Brackets) Digital Hybrid Amplifier/Receiver, Inputs On Front of Unit, lpod/MP3 - 1/8" mini jack style, 1/4" headphone jack, 1/4" Mic 1 and Mic 2 Inputs,USB Input, Rear Inputs: RCA Input for DVD or CD, Rear Outputs: Preamp output for an external additional amplifier or powered speaker,Sub preamp output to connect a powered subwoofer or an amplifier,Record output to connect a recording device,Rear Speaker Terminals: Banana plug / binding post outputs for speakers.
  • Bluetooth Capable, Built-in Preamplifier, Multicolor LED display, Digital Quartz Synthesized AM / FM tuner w/50 ....
Check Stock

Topping DX7 Pro LDAC Headphone Amplifier ES9038PRO DAC DSD1024 32bit/768kHz BT/USB/Opt/Coax/AES/IIS Input Amplifiers(Black)

  • ♫ DAC&Headphone Amplifier: DX7pro is an all-in-one machine.
  • it uses uses ESS DAC ES9038PRO+XMOS XU208 chips,the distortion is .
  • ♫ Multiple Input Interfaces: USB supports PCM32bit/768KHZ DSD512(native).
  • IIS supports 32bit/768kHz DSD64-DSD256(Dop) DSD64-DSD1024(Native)..
  • ♫ DAC+Pre Amp application: DX7 Pro has a "Pre amp" output mode. When you connect to an amplifier, a power amp/active speaker, you can adjust the volume on the DX7 Pro to solve the system settings..
  • ♫ The DX7 Pro uses digital volume adjustment, the left and right channels were controlled by digital so there will no unbalanced occurs..
  • ♫ Pure DAC Application: DX7Pro has a built-in "DAC" output mode. At this mode,in order to achieve the best performance and cooperate with other devices in the system, the headphone amp wilt turn off and the volume will be uncontrollable..
Check Stock

Dayton Audio BSK2 Dual Bass Shaker Couch Kit

  • Powerful amplifier and bass shaker combo optimized to add earth shaking bass for movies, games, and music.
  • Two Dayton Audio BST-1 Pro tactile transducers, each can handle up to 100 watts max.
  • Dayton Audio BSA-200 amplifier with built in low pass filter provides plenty of power.
  • Built-in USB port for powering 5V devices or use with wireless Dayton Audio Wave-Link technology.
  • Includes two BST-1 50W bass shakers, BSA-200 200W amplifier, and 25' of speaker wire.
Check Stock

RCA VISYS 25252 Cordless Phone Combo-Pack Includes: 5 x SDCP-H301 Batteries

  • ...ty: Gold plated connectors and copper provide maximum's conductivity and durability, ensuring optimal stereo audio transmission.Compatible with more than 90% of cars..
  • How to Use：Connect for iPhone/iPad to your RCA device with just plug the Lightning to 2 RCA cable into your car stereo, home stereo, speaker, Power amplifier, or other RCA device, can play music. It is the best choice for driving, family gatherings, office meetings, etc..
  • Compatible Device: This lightning to 2 RCA Audio Auxiliary Stereo Y Splitter adapters compatible with multiple devices, such as iPhone iPhone 12 Pro Max/12 Pro/12 Mini/12/11 Pro Max/11 Pro/11/XS Max/XS/XR/X/8/8 Plus/7/7 Plus/6S/6S Plus/5/5S/SE and iPad Pro/Air/Mini/iPod touch, and more to the speaker, stereo receiver, car Aux Speaker Power amplifier，or other RCA device..
  • What You Get: Lightning to 2 RCA Cable (6ft). Our fan-favorite 18-month warranty and friendly customer service..
Check Stock

[Upgraded]AIYIMA A01 Pro 100W x 2 Amplifier Bluetooth 5.1 Class D Integrated Amp TPA3116 2.0/2.1 Channel Power Amplifier Receiver with 3.5mm AUX Output DC12-24V with DC 24V Power Adapter

  • 【3.5mm AUX output】Bluetooth 5.1/Stereo RCA input ways,Add 3.5mm AUX Line output design,can connect next active device(Such as amplifier,Active subwoofer,Active speaker).
  • 【The chipsets are high quality designs】The Qualcomm chip uses QCC3034 Bluetooth 5.1 supporting APT-X HD and LDAC, these are the highest quality BT codecs for hi-res streaming music.
  • 【With DC24V Power Adapter】This AIYIMA A01 Pro Stereo Audio Amplifier Receiver input power DC 15-24V,A01 Pro Power Bluetooth Amplifier Package with DC 24V power adapter,With Bass & Middle & Treble control.
  • 【Multiple Channel】2.0 channel/2.1 channel multi Channel Output,100W+100W(4 ohms, 20 Hz - 20 kHz, 0.04% THD),Use 2pcsTexas Instruments TPA3116D2 chip.The TPA3116D2 are stereo efficient and digital amplifier power stage for driving speakers.
  • All aluminum alloy shell,heavy gold PCB,Build quality is surprisingly solid,Nice touch!The power circuit is completely separate from the audio circuit, Minimizing interference for clear sound.
Check Stock

RockvilIe 1000 Watt Home Theater Bluetooth Receiver+(4) 3.5' Black Cube Speakers

  • Package Includes: (1) RockvilIe RPA60BT 19" 1000w 2-Ch USB Bluetooth DJ/Pro/Karaoke Amplifier Mixer. (2) Cube by RockvilIe Pair of 3.5" Black Home Theater Wall Speakers+Swivel Brackets. : RPA60BT Receiver. Rack Ears (Detachable). (1) Remote Control. (1) AC Power Plug. Owners Manual. AC Power Plug. Antenna. Warranty Card. Features: RockvilIe RPA60BT 19" 1000 Watt 2-Channel USB and Bluetooth Karaoke Receiver/Amplifier/Mixer.
  • 19" rack mountable (removable rack brackets) digital hybrid amplifier/receiver. RMS Power @ 4 Ohms: 125w x 2. Peak Power @ 4 Ohms: 500w x 2. RMS Power @ 8 Ohms: 100w x 2. Peak Power @ 8 Ohms: 400w x 2. THD: > 0.1%. Input Sensitivity: 400mv/33 KOhm. Frequency Response: 20 Hz - 20 kHz. Signal to Noise Ratio: 80 dB. Tone Characteristic: 100Hz-10KHz 12dB. 110v/220v Switchable. Inputs: lpod/MP3 - 1/8 Mini Jack Style, 1/4 Headphone Jack, 1/4" Mic 1 and Mic 2 Inputs, USB Input.
  • Rear Inputs:RCA Input for DVD or CD. Rear Outputs: Preamp output for an external additional amplifier or powered speaker Sub preamp output to connect a powered subwoofer or an amplifier. Preamp output for an external additional amplifier or powered speaker. Sub preamp output to connect a powered subwoofer or an amplifier. Record output to connect a recording device. ....
Check Stock