Reviews Printing tips

NovaMaker PLA 3D Printer Filament, Silver PLA Filament 1.75m, PLA 1kg Spool(2.2lbs), Dimensional Accuracy +/- 0.03mm

  • ✅【Risk-Free Service】One-month free trial, Lifetime Quality Promise and Money Return Service if you’re not entirely satisfied. Professional printing advice from technique support team make sure your prints SMOOTH & STABLE with excellent adhesion..
  • ✅【Best Quality PLA Filament】Made by USA virgin PLA material with best performance and Eco-friendly, Clog-Free, Bubble-Free & Easy-to-use. Ensure Diameter 1.75mm + / - 0.03 mm..
  • ✅【Tangle-Free Tips】1KG Silver PLA Filament dried 24 hours before packaging and vacuum sealed with nylon bag. To Avoid being Tangled, Filament should be fix into Spool Holes after Every Time Use..
  • ✅【Printing Tips】Recommended Printing Temperature 190°C - 220°C, Bed 30°C - 60°C. PLA Spool Diameter: 7.8" - Spool Width: 2.6" - Spool Hub Hole Diameter: 2.1"..
  • ✅【Cost-effective & Wide Compatibility】Manufacturer NovaMaker has over 8years 3D filament R&D experiences, and produce all kinds of filaments in large scale with premium quality, which contribute to 3d filament cost-effective and reliable for all common 1.75mm FDM 3D printers, such as Creality, MK3, Ender3, Prusa, Monoprice, FlashForge etc..
Check Stock

30 Sheets Transparency Film for Inkjet Printer Inkjet Transparency Film Transparent Inkjet Printing Film

  • 1.Material: Inkjet Transparency Film constructed with high-grade synthetic base PET material, features anti-static, great registration and no curling, which designed for screen printing industry..
  • 2.Printer and Writer Compatible: Printable transparency film, recommended for any standard inkjet printer or copier. Our inkjet transparency sheets is writtten on compatible for markers, pens and more writing tools..
  • 3.Features: Special coating on the surface of the film, which can produce excellent details. It can also dry faster, good performance tear not broken, long storage time, easy to archive management. Our Inkjet Transparency Film is non-waterproof, can’t wet or damp, you need to store them in a dry and cool space..
  • 4.Using Tips: To figure out which side is the printing side, you can dampen your finger then touch at the corner of the film, the side you feel sticky is the printing side..
  • 5.Application Scope: Applicable to aerospace mapping, printing plate, slide projection, projection and electronic fixture printing film and other transparent screen effects..
Check Stock

Coex Metallic Gunmetal Silver PLA 3D Printer Filament 1 kg Spool 1.75 mm Dimensional Accuracy +/- 0.03 mm

  • Great Sample Pack for 3D Pen and 3D Printer: Include 25 Unique Popular Silk Shiny Colors, Each Color 4 Meters Length, Perfectly For Silk PLA Sample....
  • 25 Most Popular Silk Shiny Colors: 10 Silk Metal Colors: Silk Bronze, Silk Copper, Silk Silver, Silk Gold, Silk Gun-Metal, Silk Green Gold, Silk....
  • Premium Quality, Easy to Print: Widely Compatibility for FDM 3D Printers and 3D Pen, 1.75mm High Diameter Tolerance, No Edge Warping, Consistent....
  • 3D Printer Test Printing Tips: Recommend Heat Bed 50-60°C, Recommend Printing Temperature: 215°C, To Avoid being Tangled, Insert Filament into Spool....
  • Extra Gift: 2 Silicone Finger Caps, To Protect Your Fingers During 3D Drawing or 3D Printing, It Support You to Make 3D Printing Much More Smoothly....
Check Stock

NovaMaker ABS Filament 1.75mm, Blue ABS 3D Printer Filament, 1kg Spool(2.2lbs), Dimensional Accuracy +/- 0.03mm, Fit FDM 3D Printer and 3D Pen

  • ✅【Risk-Free Service】One-month free trial, Lifetime Quality Promise and Money Return Service if you’re not entirely satisfied. Professional printing advice from technique support team make sure your prints SMOOTH & STABLE..
  • ✅【High Stability and Durability ABS Filaments】Made by TAIWAN virgin ABS material with best performance, Less Odor, Less Warping & Clog-Free, Bubble-Free. Stronger than PLA and PETG, Ensure Diameter 1.75mm + / - 0.03 mm..
  • ✅【Tangle-Free Tips】1kg Blue ABS Filament dried 24 hours before packaging and vacuum sealed with nylon bag. To Avoid being Tangled, Filament should be fix into Spool Holes after Every Time Use..
  • ✅【Printing Tips】Recommended Printing Temperature 230°C - 260°C, Bed 85°C - 100°C. ABS Spool Diameter: 7.8" - Spool Width: 2.6" - Spool Hub Hole Diameter: 2.1"..
  • ✅【Cost-effective & Wide Compatibility】Manufacturer NovaMaker has over 8years 3D filament R&D experiences, and produce all kinds of filaments in large scale with premium quality, which contribute to 3d filament cost-effective and reliable for 1.75mm FDM 3D printers + 3D Pen..
Check Stock

NovaMaker ABS Filament 1.75mm, Black ABS 3D Printer Filament, 1kg Spool(2.2lbs), Dimensional Accuracy +/- 0.03mm, Fit FDM 3D Printer and 3D Pen

  • ✅【Risk-Free Service】One-month free trial, Lifetime Quality Promise and Money Return Service if you’re not entirely satisfied. Professional printing advice from technique support team make sure your prints SMOOTH & STABLE..
  • ✅【High Stability and Durability ABS Filaments】Made by TAIWAN virgin ABS material with best performance, Less Odor, Less Warping & Clog-Free, Bubble-Free. Stronger than PLA and PETG, Ensure Diameter 1.75mm + / – 0.03 mm..
  • ✅【Tangle-Free Tips】1KG Black ABS Filament dried 24 hours before packaging and vacuum sealed with desiccants in nylon bag. To Avoid being Tangled, Filament should be fix into Spool Holes after Every Time Use..
  • ✅【Printing Tips】Recommended Printing Temperature 230°C – 260°C, Bed 85°C – 100°C. ABS Spool Diameter: 7.8″ – Spool Width: 2.6″ – Spool Hub Hole Diameter: 2.1″..
  • ✅【Cost-effective & Wide Compatibility】Manufacturer NovaMaker has over 8years 3D filament R&D experiences, and produce all kinds of filaments in large scale with premium quality, which contribute to 3d filament cost-effective and reliable for 1.75mm FDM 3D printers + 3D Pen..
Check Stock

POVOKICI 24In (60cm) DTF Printer with 2 E*pson I3200-A1 Printheads, Direct to Film Printer T-Shirt Printing US Stock (Maintop 6.1 Software)

  • Specification: Maximum Printing width: 610mm.
  • 720 x 2400dpi (4Pass, 6Pass, 8Pass). Ink Type and Configuration: Textile Pigment Ink (C/M/Y/K/W). Printing Software: Maintop 6.1/Photoprint..
  • Power 400W. Heating Sections: Pre-heater, printing bed heater, rear heater: 30℃-65℃. The Ironing Temperature 160-170℃. Environmental Conditions: Temperature 20-28℃/Relative Humidity 65%-75%..
  • Printer Size (L x W x Hmm) 61 x 35 x 47in. Net Weight 176lb..
  • We offer all kinds of DTF products. Warm Tips: Constant Voltage (CV) 220V , will send 110V voltage converter..
  • US Stock: Ship within 2 business days. Welcome to visit our CA showroom and special discount is available for you. Great customer service with 24 hours online tech supporting..
Check Stock

Phrozen Sonic Mighty 4K Large LCD Resin 3D Printer, 9.3' Mono LCD Screen & 22cm Z-axis, Matrix LED UV Light Tech, L7.9 x W4.9 x H8.7 Printing Volume, for Large 3D Models, Miniatures, or Tabletops

  • 【Bigger Printing Area & A Taller & Stronger Z-axis】Sonic Mighty 4K provides a 9.3” printing area that empowers makers to print bigger and larger quantities in a single batch. Phrozen Sonic Mighty 4K comes with a 22 cm Z-axis and dual-linear rails, allowing creators to produce tall and spectacular tabletops, such as gigantic dragons or large ogres. The stronger Z-axis also prevents the 3D printer from wobbling, which provides the user with a stable and reliable printing process..
  • 【High 4K Resolution】With its large printing capability, Sonic Mighty 4K doesn’t compromise its printing precision. Monochrome LCD printing also allows the 3D printer to print up to 4 times faster than traditional 3D printers. Rapid prototyping greatly improves printing efficiency and increases efficiency by printing out each layer in only two seconds. In addition, each Phrozen 3D printer LCD is guaranteed to have 2000 working hours while a free 3-month warranty is also offered..
  • 【Quality Prints and Consistent Success】Phrozen Sonic Mighty 4K’s matrix light source consists of 54 UV LED lights with uniform light emission.
  • this ensures superior print results and accurate printing size. The set screws on the sides of the building plate also ensure longer-lasting le....
Check Stock

Phomemo-D30 Label Maker-Mini Label Maker Machine with Tape inkless Small Bluetooth Mini Label Printer Sticker Maker Compatible with iOS + Android,Color Pink

  • 2022 Upgraded version--Phomemo D30 Label Maker lighter and smaller than traditional label Makers. DPI increased by 25%. can print 52 rolls of paper continuously after being fully charged..
  • Save Money - Phomemo D30 label printer use Direct thermal technology, don't require ink, toner, or ribbons,BPA free. Lower cost compared to inkjet printers. Surprise gift for anyone..
  • Bluetooth and portable--Phomemo label Printer with wireless Bluetooth connection, easy and fast printing, creating labels from mobile devices, easy to customize labels. Label size from 0.24-0.47Inch (6mm-12mm) great for price tag,Personal item identification, Food date marking,Cable identification and more..
  • Fast Printing - 60mm/s high-speed printing makes printing faster and smoother. Phomemo bluetooth labeling machine is suitable for high-volume continuous printing and works efficiently.The Phomemo D30 Thermal Labeler provides superior print clarity for easy printing - dark imaging and crisp prints..
  • Tips for Using app--Install Print master App from Apple Store & Google Play-003eOpen the App and Turn on D printer-003eChoose printer model Dfrom menu and then click “unconnected” button at the top of the screen-003e Match and connect Bluetooth via the app..
Check Stock

PLA 3D Printer Filament, Apcvo Polylactic Acid 1.75mm 3D Printer Filament Bundle 1KG Spool (2.2 LBS) 3D Printing Materials, Dimensional Accuracy +/- 0.03 mm (Gray)

  • 【Printing tips】The recommended hot bed temperature is 40-60°C, and the recommended printing temperature is 180-200°C. To avoid entanglement, insert the filament into the reel hole to fix it after each use..
  • 【Wide Compatibility】Thanks to high-quality manufacturing accuracy standards and a small diameter tolerance of +/- 0.03mm, all commonly used 1.75mm FDM 3D printers can work perfectly and coordinate with them perfectly..
  • 【PLA fiber with enhanced toughness】High-quality PLA fiber has the incredible advantage of being easy to print. Optimized printing quality, high purity, low shrinkage and excellent interlayer adhesion can meet your needs for printing projects with high toughness functional parts..
  • 【Dimensional accuracy & consistency】Advanced CCD diameter measurement and adaptive control system in manufacturing can ensure strict tolerances. The diameter is 1.75 mm, the dimensional accuracy is +/- 0.03 mm, 1 kg spool (2.2lbs), the length is about 336 meters..
  • 【No clogging, no bubbles】It has been completely dried for 24 hours before packaging, and vacuum sealed with a desiccant in a nylon repacking bag, which can make the printing more smooth and stable. Since the carbon fiber filament is easily damp, please store it in a resealable al....
Check Stock

DTF Transfer Film 13\ x 19\ DTF Transfer Film Hot Peel for Textile T-Shirt Printing -100 Sheets

  • Sheet type: A3+ Premium Sheets (13 " x 19"/33 x 48 cm).
  • DTF Transfer Film is a hybrid hot peel. This is a solution so versatile that gives you bright colors and is premium coated. You and your customers will be amazed and happy..
  • NOTE: This product needs DTF Inks and DTF Powder. Print side: Coated.
  • Tips: Double side is rough, the outside of roll is printing side. Front side for printing,printing side may be tested with clear Scotch tape pressing peeling for any white nano particles..
  • Application: For use on cotton, polyester, blends, Tri-blends, leather, spandex, and more..
Check Stock