Reviews Printing Consumption

HP LaserJet Pro MFP M428fdn Monochrome All-in-One Printer with built-in Ethernet & 2-sided printing, (W1A29A)

  • ...e printer, and save paper with automatic 2-sided printing.Operating temperature range:50 to 90.5°F.
  • SPEED THROUGH TASKS – Stay productive with single-pass, 2-sided scanning, 50-sheet auto document feeder, 250-sheet input tray, and print speeds of up to 40 pages a minute from this multifunction laser printer.Power consumption:510 watts (active printing).
  • ENHANCED ENERGY EFFICIENCY – Designed with the environment in mind, HP LaserJet Pro MFP M428fdn saves up to 22% energy over prior products, with technologies that help reduce paper waste.
  • TONER CARTRIDGES YOU CAN TRUST – Avoid reprints, wasted supplies, and service calls by using Original HP 58A/58X toner cartridges designed for your multifunction laser printer.
  • ONE-YEAR LIMITED HARDWARE – Get help with 24-hour, 7 days a week HP Web support. See specification sheet for terms and conditions.Power consumption:510 watts (active printing).
  • This printer is intended to work only with cartridges with original HP chips or circuitry and will block cartridges using non-HP chips or circuitry. Periodic firmware updates will maintain the effectiveness of these measures..
Check Stock

A3+ Printer Width 13inch DTF Printer Machine Direct Transfer Film L1800 Converted for DIY Print T-Shirts/Hoodie/BGS/Pillow etc. (6X 100ml Ink+100pcs PET Film+Powder

  • ▶The photo color reproduction is 100% fidelity, and the colors are bright, rich and delicate..
  • ▶There are no restrictions on fabrics and colors, the patterns are super flexible and stretchable.
  • ▶which supports a maximum transfer film width of 13 inches (33cm), it is wider than the regular A3 size transfer film of 11.8 inches (30cm)..
  • ▶Low ink consumption, only 1.5ml of ink is needed to print an A3-size image. The most suitable DTF printer for beginners, with fast printing speed, printing multiple patterns at the same time, and lower consumption of ink, the operation is the simplest printer on the market at present.
  • ▶3 Month Limited Warranty (Warranty does not cover the printhead, ink system ).
Check Stock

Epson Workforce Pro WF-7310 Wireless Wide-Format Printer with Print up to 13\ x 19\

  • Epson printing system is designed to be used exclusively with Epson Genuine Cartridges. Use of non-genuine ink could cause damage not covered under the printer’s ltd. wnty..
  • High-performance wide-format printing — accomplish more with fast wide-format printing up to 13" x 19".
  • High-speed printing — PrecisionCore Heat-Free Technology streamlines workflow with 25 black/12 color ISO ppm () and fast first-page-out.
  • Print-shop quality — DURABrite Ultra instant-dry pigment inks deliver sharp text and vivid colors.
  • Designed for productivity — engineered for durability, reliability and heavy workloads.
  • 500-sheet paper capacity — easily tackle high-volume print tasks with two 250-sheet trays and a rear feed for efficient, convenient printing.
  • Convenient navigation and control — features a 2.4" color display, plus Epson Smart Panel App (2) for easy setup and control from smart devices (3).
  • Complete wireless solution — stay connected with Wi-Fi 5 compatibility, plus network-free Wi-Fi Direct (1).
  • Zero warmup time — and low energy consumption (4) with PrecisionCore Heat-Free Technology.
Check Stock

USA Import Material 200x200mm 300W 24V Cube Flexible Silicone Heater Compatible with Voron V2.4 Prusa i3 RepRap 3D Printer Heated bed 24V

  • used for printing area 200x200mm 3D printer.
  • With 1meter NTC 100K 3950 thermistor for temperature Control. Power consumption: 300W. Attached with two pieces 1meter length power wire.
  • This heated bed is used with 200x200mm printing area 3D printers, but also compatible with Voron V2.4 3D printer which printing area is 250x250mm..
Check Stock

ELEGOO Mars 4 DLP 3D Printer, Desktop Resin 3D Printer with Ultra-Quiet Printing, 20000+ Hours Service Life, and Ultra-Low Operating Power, Printing Size of 132.8x74.7x150mm³/5.22x2.94x5.9in³

  • ...0+ hours, 10 times longer than the 2,000 hours lifespan of an LCD screen, which means you will save a lot of maintenance costs for replacing your LCD printer's screen..
  • [ & - ] 12W ultra-low operating power is energy-saving and eco-friendly, with about 1/7 energy consumption of LCD printers. Since lower power consumption generates less heat, there is no need for a cooling fan to dissipate heat, reducing print noise below 48 dB..
  • [ ] The Z-axis linear rail is thickened from 15mm to 20mm, which effectively reduces the vibration amplitude during Z-axis movement and the layer pattern of printed models for better final print results. Sandblasted surface build plate with strong adhesion to improve the printing success rate..
  • [ ] Three printing modes are optional: static mode and dynamic mode (including smooth and high-speed mode). In dynamic mode, the slicing software will dynamically adjust the printing speed by the cross-sectional size of the printed model to reduce the impact of the release force, thereby improving the printing efficiency. In addition, ELEGOO self-developed a new open-source GOO slicing format..
Check Stock

JADENS 3X5 Bluetooth Shipping Label Printer, Thermal Label Printer for Small Packages, Label Maker Machine, Support Windows, Mac, Chromebook, iOS, Android, Compatible with Amazon, Ebay, Etsy, USPS

  • 【3×5 Label Printer Reduces Paper Consumption by 38%】Compared to 4×6 shipping label printer, JADENS 3×5 Bluetooth label printer uses 3”x5” paper, reducing paper consumption and saving your cost. When choosing to print the 4×6 shipping label, the document will resize to 3×5 inches by default..
  • 【Compatible with Windows, Mac and Chromebook】This innovative 3×5 wireless label printer is suitable for Windows, Mac and Chromebook. Install the driver according to the instructions, connect USB then you can easily operate the 3×5 thermal label printer and print your labels. We also provide you with a free and friendly app “Jadens Printer”, you can easily connect the Bluetooth label maker with iOS and Android..
  • 【Address Label Printer for Small Business】Thermal shipping label printer is compatible with all major shipping platforms and e-commerce platforms, such as Amazon, eBay, Etsy, Shopify, Poshmark, UPS, USPS, DHL, Shippo and so on. 3×5 shipping label printer for small packages is a great helper for your business..
  • 【Bluetooth Thermal Label Maker & A Great Chritmas Gift 】The printing width of 3×5 label printer for labeling is 40-80mm/1.57”-3.15”, and the minimum printing length is 20mm/0.79”, suitable for any other direct ther....
Check Stock

Canon imageCLASS MF741CdwB All-In-One Wireless Color Laser Printer for Business Office, White - Print Scan Copy - 5' Touchscreen, 28 ppm, 600 x 600 dpi, 1GB Memory, Auto 2-Sided Printing, 50-sheet ADF

  • ...dwB has an impressive print speed of 28 ppm for 8.5 x 11" paper and 22.9 ppm for 8.5 x 14" paper. Copy speeds are excellent as well, with a copy speed of 28 ppm for letter-sized documents and 22.9 ppm for legal-sized documents..
  • Two-sided printing plus the ability to print multiple pages onto one sheet reduces paper consumption, and by using a combination of new fusing technologies with low-melting-point toner, Canon minimizes power requirements, which lowers energy consumption. The all-in-one unit features a scan and copy resolution of 600 x 600 dpi for detailed scans and clear copies, and scanned files can be converted into multiple file formats, including Hi-Compression PDF and Searchable PDF..
  • A 5" color touchscreen with smartphone-like usability delivers an intuitive user experience and can be customized by a device administrator to simplify many daily tasks. Various mobile printing solutions are made possible with the Canon Print Business app, and the unit is also compatible with Apple's AirPrint technology on select iOS devices. For Android users, the printer supports the similar Mopria Print Service, and for Chrome-based users the printer is compatible with Google Cloud Print..
  • What's in the Box: Canon imageCLASS MF741CdwB Multifunction Color La....
Check Stock

Canon Office and Business MB5120 All-in-One Printer, Scanner, Copier and Fax, with Mobile and Duplex Printing, Model:0960C002

  • Print Features: AirPrint, Auto Duple Printing, Canon Print App, Google Cloud Printing, Microsoft Mobile Print, and Moria Device Printing, 250 Sheet Paper Capacity..
  • Copy Features: Single Pass 2-sided Copying and ID card copying.Power Consumption (approx.) : 27.0W Copying (0.9W Standby).
  • Scan Features: Single Pass 2-sided Scanning, Push Scan, Scan to Memory(USB Flash Memory), Network Scan, Scan to Cloud, Scan to Concur, and Scan to Network Folder.
  • WHAT'S IN THE BOX: MB5120 Printer, Setup CD-ROM, Full Set of Ink Tanks and Power Cord, Telephone Line Cable.
Check Stock

QWORK AC 110V 400W Knob Motor Speed Controller DC 0-90V Variable Adjustable Speed Regulator for 90V DC Motors

  • Fitting - Our speed controller can only be used for 90V DC motors..
  • Low Power Consumption - With our compact design and high precision, it reduces power consumption..
  • Speed Control - Due to the adjustable knob, it can adjust the voltage freely, convenient and simple..
  • Widely Usage - It can be used for speed governing device drivers. It fits for many areas, such as packing, printing, electronics, clothing machinery, and etc..
  • 100% Satisfied Service - Enjoy a smooth & frustration-free experience with our 100% Satisfied Service in one Month!.
Check Stock

ELEGOO Resin 3D Printer, Saturn S Mono MSLA 3D Printer, UV Photocuring Resin LCD 3D Printer with 9.1 inches 4K Monochrome LCD, Off-Line Print, 196x122x210mm / 7.71x4.80x8.26 inches Printing Size

  • 【Faster Printing】Saturn S 3D printer comes with an 9.1-inch 4K HD Monochrome LCD of 4098 x 2560 resolution, which shortens the printing time per layer to 2s-3s while restores the vivid details of the original models. Low energy consumption and heat emission extends the lifespan of the mono LCD by 3 times..
  • 【Larger Build Volume】With a larger printing volume of 196mm*122mm*210mm/7.71in*4.80in*8.26in, you can print bigger complex structural parts, or multiple small 3D models at a time, which greatly increases your printing efficiency..
  • 【Higher Printing Accuracy】The matrix light source of 54 UV LEDs emits optimal uniform light beam of 405nm wavelength for rapid prototyping, ensuring a sleek and delicate surface of 3D printed model and a more accurate printing size..
  • 【Super Stable Structure】The Z-axis adopts a double linear guide-way shock absorption unit, with an accuracy of 0.00125mm for more stable and accurate moving to reduce the risk of layer shifting. The build plate with sandblasted surface has a stronger adhesion, and the set screws on which have long-lasting leveling performance without frequent calibration..
  • 【Pleasant Printing Experience】The replaceable activated carbon filter on the USB port can effectively absorb and filter th....
Check Stock