Reviews Primary Arms Classic 30mm Red Dot Gen

Vortex Optics Razor HD Gen II-E 1-6x24 SFP Riflescope VMR-2 MRAD

  • The Razor HD Gen II-E sheds nearly a 1/4 pound from its predecessor, is feature rich, and extremely accurate in short to medium applications. The VMR-2 MRAD reticle is designed to maximize long distance shooting and ranging abilities..
  • The APO optical system delivers stunning image quality through premium, high density, extra-low dispersion glass. All lenses are fully multi-coated with XR plus anti-reflective coatings to increase light transmission for amazing brightness..
  • A low-profile locking illumination dial has 11 levels of brightness with off positions between each setting. The second focal plane reticle with a daylight bright center dot provides red dot functionality and close quarters versatility..
  • Streamlined zero resettable turrets track precisely and offer ample adjustment in a single turn. An ultra-forgiving eye box with generous eye relief promotes fast target acquisition and optimal monitoring of surrounding environments..
  • The single piece 30mm tube withstands heavy recoil and impact. O-ring sealed and argon purged, the scope delivers waterproof and fog proof performance. Armored coatings protect external lenses from scratches, oil, and dirt..
Check Stock

Reptilia DOT Mount for Aimpoint Micro / CompM5 (Lower One Third) (Flat Dark Earth (FDE))

  • Compatible with Aimpoint – Micro R-1, H-1, H-2, T-1, T-2, CompM5, – Sig – ROMEO4, ROMEO5 – Vortex Optics – Sparc I & II – Primary Arms – Micro Dot & Advanced Micro Dot – Holosun Technologies – HS403.
  • Spring-loaded nitrided steel clamp and mounting bolt simplify the installation process.
  • Sits flush with the body of the mount for a low-profile, anti-snag design.
  • Type III hardcoat anodized 7075 aluminum.
Check Stock

Ade RD3-009-MOS Red Dot Reflex Sight for Glock MOS 17 19 34 35 40 41 Pistol Handgun

  • Fits Optics Ready Pistol such as Glock MOS System such as Gen4 17,19,34,35,40,41,43,43x and also fit Springfield OSP(non-hellcat), Canik TP9 SFX/Elite Combat(non elite sc), Walter PPQ Q5 Match, FNX 45 Tactical, IWI Masada handguns that come with mounting plates that marked for DOCTOR/VORTEX VENOM type red dot.
  • All mentioned above pistols must to be OPTICS READY model that comes with MOUNTING PLATE marked for DOCTOR/VORTEX. If not, user has to purchase after market mounting plate(not included with this red dot sight purchase) to replace the rear sight. For Non-MOS(non-optics ready) glock, search part number B01L9734Y6 on amazon for optic plate..
  • This red dot does NOT fits glock with AFTERMARKET/Non-Genuine Glock slide with custom optic cut for RMR because the footprint is different. 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included).
  • Comes with an Picatinny mounting plate. It does not comes with any other red dot mounting plate for a specific handgun, user need to purchase the plate separately for the plate made for the specific handgun..
  • Waterproof for 30mm under 3ft water. Shock/Fog Resistant.
Check Stock

RD004T TACFIRE Rd004-T 1x30 Ill Red/grn Dot Sight Tan

  • TacFire Official Product, 1x30mm Tactical Dual-Illuminated Red/Green Dot Rifle Scope Sight in Dark Earth Tan with Cantilever Weaver Base Mount with Lens Covers and Battery Included..
  • Specifications of the Red Dot Sight: Magnification: 1x, Obj. Aperture: 30mm, Field of View: 50 degrees, Eye Relief: Unlimited, Illumination: Red & Green , Reticle Type: Dot, Dot Size: 4 MOA, Material: Lightweight 6061 T6 Aircraft Grade Aluminum.
  • Dimensions of Red Dot: Length: 5.25", Width: 2.56"/65mm, Height: 2.75"/70mm, Net Weight: 9.7 oz..
  • Included in the package: Dual-Illuminated Red/Green Dot Sight x1, Flip-Up lens covers, Cantilever Weaver Base Mount x1, CR2032 Battery x1, Hex Wrench x1, Cleaning Cloth x1.
  • Features of the Red Dot Sight: Durable Cantilever PEPR mount for any 20mm Picatinny or Weaver rail with Quick Attachment Rail Design Allowing Precision Fit, Adjustable Windage and Elevation, Intensity brightness Control Settings Per Color, Fog Proof, Weather Proof, and Shock Resistant, Removable Spring loaded flip-up lens covers..
Check Stock

Meprolight RDS Pro V2 Electro-Optical Reflex Sight, Bullseye Reticle + 4 Additional AA Batteries & Lens Cleaning Cloth (Red Bullseye) (Red Bullseye)

  • RAPID TARGET ACQUISITION: With its large display window and clearly-defined Red-dot, the Mepro Tru-Dot RDS ensures rapid target acquisition with both eyes open. The large display window guarantees incredible performance and efficiency..
  • COMPATIBLE: To facilitate night vision operations and long-rage target engagement, the Mepro Tru-Dot RDS is compatible with GEN II and GEN III NVGs as well as with Magnifying Scopes.
  • HUMAN-ENGINEERING: Its human-engineering allows positioning of NVGs and Magnifiers close to the sight's optics with no decrease in the field-of-view and without compromising convenient switch operation..
  • NUMEROUS RETICLE BRIGHTNESS LEVELS: Offering four easily switchable reticle brightness intensities, allowing the shooter to adjust to changing light conditions. In ambiences of brighter light, or subdued light, this awesome feature comes into play. The Mepro Tru-Dot RDS fits every tactical scenario..
  • AUTO SHUT-OFF FOR LOW POWER CONSUMPTION: The technologically advanced on-off sensor shuts the optic off to preserve battery life when no movement is detected. This feature saves unnecessary wasted energy, while preserving battery for your next grand mission. Take this along on your next expedition and watch the magic unfold..
Check Stock

Ade Advanced Optics Optics Delrin Shims 1.0 Degree for Vortex Venom & Viper Burris Fastfire II III,Red dot Sight

  • Optic Shim is made to fit between the red dot and the mounting plate. Depending on the handgun, some handguns need THIS 1degree shim to give extra....
  • Do not return your "defective" red dot that can't adjust the illuminated dot high enough to zero. This optic shim solves the problem by raising the....
  • Fits: Vortex Venom & Viper, Burris Fastfire II, III, Docter Red Dot Sight, Insight, Eotech MRDS, Sightmark minishot, Meopta. All trademarks mentioned....
  • Also Fits: Ade Advanced Optics RD3-006, RD3-009, RD3-011, RD3-012, RD3-013, RD3-015. The center two screw holes might be 1 or 2mm off for some red....
  • What it does? While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turn(screw maxed-out),....
Check Stock

Ade RD3-013-MOS Red Dot Reflex Sight for Glock MOS 17 19 34 35 40 41 Pistol Handgun

  • Fits Glock MOS System such as Gen4 17,19,34,40,41,35 and Gen4 17,19,34.
  • This Red dot fits directly on Glock MOS system with the #1 mount that comes with MOS without needing to remove the rear sight..
  • Promotes rapid target acquisition while providing a precise point of aim.
  • getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery.
  • New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 Battery(Included). Come with a mounting plate for picatinny rail..
  • 4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button..
Check Stock

Hidden Truth

  • Small Red dot adjustment:Steps adjust the mini red dot,①:twist and loosen the two screws above the switch (SET SCREWS)②:if you need to adjust the up and down direction of the front sight, please adjust the screws above the red dot (UP) ③:if you need to adjust the left and right wind direction of the front sight,please adjust the screws to the right of the red dot (R)④:after adjusting the up and down and wind direction, please lock the two screws (SET SCREWS).
  • Please note that when adjusting the red dot front sight, the red dot is fixed up and two parallel dots are set as reference points at a distance, (the effect is not obvious at close range)..
  • Dimensions: 40 mm (length) x 28 mm (width) x 35 mm (height) PLEASE NOTE THAT this item is fit for most of the tools,NOT ALL. Please see the size whether you need before buy it. If there is any questions, please contact us first..
  • This small red dot contains a separate switch with 3 steps for OFF, LOW BRIGHTNESS, HIGH BRIGHTNESS. Scope of application: 30-100m..
  • Package includes:1 x 3MOA Red Dot + 1 x Battery Backup + 2 x Hexagonal Screwdriver + 1 x User Manual + 1 x Dust Free Cloth..
Check Stock

Burris FastFire Reflex Red Dot Sight for Rifles, Pistols and Shotguns, FastFire III (8 MOA Dot), Black (300236)

  • PINPOINT ACCURACY – The FastFire III puts an unmistakable red dot at the point of impact within your field of view, giving you an immediate advantage in speed and accuracy..
  • LIGHTWEIGHT OPTICS – With lightweight construction and durable design, the FastFire III can be used as a primary sight or paired on top of an existing sight..
  • VERSATILITY DEFINED – Rely on the automatic brightness sensor to adjust to match the environmental conditions or choose one of the three manual brightness settings.
  • The 8 Red MOA Dot Sight is ideal for short range shooters and fast acquisition..
  • MUST-HAVE COMPETITION GEAR – The Fast Fire III will work with virtually all optics-ready side arms, making it a convenient part of your competitive shooting system..
  • Covered by the Burris Forever Warranty. We will repair or replace your Burris optic if it is damaged or defective. Warranty does not cover loss, theft, deliberate damage or cosmetic damage that does not hinder the performance of the product..
Check Stock

Vortex Optics Razor Red Dot Sight Quick-Release Riser Mount

  • The Riser Mount with a quick release lever is designed for mounting the Razor red dot sight onto a flattop style rifle as the primary optic. Provides....
  • When used in conjunction with the Picatinny clamp included with the Razor, this mount positions the red dot of the Razor in the lower third of the....
  • Features the Auto Lock Lever System with the following advantages: doesn't require proprietary tools, can be adjusted with finger or flathead....
  • The Riser Mount provides a rise .6 inches (15.3mm) above the base surface. Weighs 3 ounces. Made with pride in the U.S.A..
Check Stock