Reviews Pressurized Solar Collector Tank

Lewisia 5W Solar Fountain Pump for Pool Koi Pond Bird Bath Garden Decoration Submersible Water Pump Kit

  • LARGER Solar Collector --- 5W, a greater wattage rating than other solar water pumps for sale, the more power and circulation.
  • Metal Bracket --- 2 Ways to Install the Solar Panel: Stand on the ground or mount on the wall with included screws.
  • Long Cable Length --- 10ft/3m cord from the pump to the solar panel so it would get sun most of the day.
  • High Quality --- Solar panel is made up of polycrystalline silicon and ABS, safe and reliable for the added durability.
  • Multiple Application --- Great for bird bath, fish tank, small pond, garden decoration, water circulation for oxygen, etc..
Check Stock

Super Soaker 3000 [Explicit]

  • TANK MADE WITH RECYCLED PLASTIC: The tank on this Nerf Super Soaker XP50-AP water blaster is made with recycled plastic bottles.
  • PLASTIC-FREE PACKAGING EXCEPT TAPE AND GLUE: We’re passionate about protecting our planet and conserving its natural resources. We believe every package makes a difference -- please recycle this one.
  • AIR-PRESSURIZED CONTINUOUS BLAST: Pump to pressurize the chamber with air, then pull the trigger for a continuous, air-pressurized blast of water from the Nerf Super Soaker XP50-AP water blaster.
  • RETRO DESIGN: Brings back the pressurized mechanism and classic styling of the original Super Soaker water blasters for a splashtastic blast from the past.
  • FILL, PUMP, AND BLAST: Fill the tank, pump the handle to pressurize, and pull the trigger to deliver a deluge of soakage.
Check Stock

VEVOR Hot Water Recirculating Pump, 120W 110V Water Circulator Pump, Automatic Start Circulating Pump NPT 3/4\ w/Brass Fittings, Stainless Steel Head, 2 Speed Control for Electric Water Heater System

  • Applicable to the duplex apartment,suburban villas,water heater pressurized,household water pressurized, and the solar water heater pressurized. Our water pressure pump especially suitable for water heater pipe pressurization with insufficient water pressure, to prevent water supply from being cold..
  • Max Flow Rate: 396GPH(25L/min), Max Head: 49.2ft(15m).
  • Liquid temperature range: 0 F- +212 F.the water boost pump with flow switch can automatically adjusts to your needs, Increase the pressure of household water tank and keep a steady pressure..
  • Easy installation, only need a wrench to connect the pump, saving you the cost of plumbers.
  • the water booster pump is also Energy Saving.
  • Powerful 120W Motor, High Quality Water flow switch and full brass fittings included, All-in-one unit to make the water booster pump durable and provide enough water pressure for home use..
  • We provide 30 days free return and 3 months fittings parts replacement for our water boost pump.If you have any problems for using our products,feel free to contact with us at the first time,we’ll made you satisfied with your purchase..
Check Stock

Doheny's Solar Heating Systems for Above Ground Swimming Pools (2.5' x 20' Collector Kit)

  • SOLAR DOME POOL HEATING SOLAR SYSTEM: Easy to install with NO gas or electric connections! Heat your pool water the GREEN way using solar energy. Add weeks to your season with free energy from the sun! Multiple collectors can be connected in series to increase heating efficiency. Each dome can raise pool temps up to 10 degrees in approximately seven days. Dimensions: 28" L x 28" W x 12" H. Bypass kit REQUIRED for hooking up two or more heaters or pools that have a 1 HP or larger pump..
  • ABOVE GROUND SOLAR HEATING PANEL SYSTEMS: These energy and money saving solar pool systems collect the sun's rays, warming the water that circulates through the panels channels and returns it to the pool! Collector kit can be mounted on plywood (as shown in image) and rests besides pool, or be roof mounted. Either option REQUIRES a roof/rack mounting kit..
  • SOLAR PANEL COLLECTOR KIT CONFIGURATIONS AVAILABLE IN THE FOLLOWING SIZES: 2.5' W x 20' L.
  • 5' W x 20' L (Comes as (2) 2.5' W x 20' L Panels).
  • and 5' W x 10' L (Comes as (2) 2.5' W x 10' L Panels). **ALL SYSTEMS DO NOT INCLUDE PVC OR FLEX PIPES**.
Check Stock

Supersoaker F1972FF1 Nerf Super Soaker XP50-AP Blaster, Tank Made with Recycled Plastic, Air-Pressurized Continuous Water Blast

  • TANK MADE WITH RECYCLED PLASTIC: The tank on this Nerf Super Soaker XP50-AP water blaster is made with recycled plastic bottles.
  • PLASTIC-FREE PACKAGING EXCEPT TAPE AND GLUE: We’re passionate about protecting our planet and conserving its natural resources. We believe every package makes a difference -- please recycle this one.
  • AIR-PRESSURIZED CONTINUOUS BLAST: Pump to pressurize the chamber with air, then pull the trigger for a continuous, air-pressurized blast of water from the Nerf Super Soaker XP50-AP water blaster.
  • RETRO DESIGN: Brings back the pressurized mechanism and classic styling of the original Super Soaker water blasters for a splashtastic blast from the past.
  • FILL, PUMP, AND BLAST: Fill the tank, pump the handle to pressurize, and pull the trigger to deliver a deluge of soakage.
Check Stock

Class A Customs | T-7500 | 75 Gallon Fresh Water Holding Tank

  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process..
Check Stock

Class A Customs | T-6500 | 65 Gallon RV Fresh Water Holding Tank

  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process..
Check Stock

Class A Customs 13 Gallon Water Tank & Plumbing Kit T-1300-BPK

  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adapter (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adapter (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adapter (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

Class A Customs | T-2000 | One (1) RV Fresh Water 20 Gallon Tank, Grey Water

  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process..
Check Stock

Class A Customs | T-2100 | One (1) RV Fresh Water 21 Gallon Tank, Grey Water

  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process..
Check Stock