Reviews Pressure Washer Couplings

Twinkle Star Sewer Jetter Kit for Pressure Washer -100 ft Hose, 1/4 Inch NPT, Drain Cleaning Hose, Button Nose & Rotating Sewer Jetting Nozzle, Orifice 4.0, 4.5, 5.5, 4000 PSI

  • ...h obstacles and maintain flow. 1 x 100 FT Pressure Washer Hose, 3 x Button Nose – Orifice 4.0, 4.5, 5.5, 1 x Rotating Nozzle, 1 x M22-14 Solid Brass, 1 x Thread Seal Tape, 1 x 1/4 ” Quick Connector..
  • [Durable Plumbing Jetter Hose]: Small outside diameter flexible and strong toughness sewer line hose with couplings, allowing hose and nozzles to fit through sewer line. PE tube, PVC cover, Dual-layer terylene reinforcement, which is very durable and can resist weather,oil, ozone and abrasion..
  • [3 + 1 Sewer Jetter Nozzle]: 3 Button Noses, 1 front jet at 0° to clear the blockage in the pipe, 3 rear jets at 33° pushes forward and washes loose debris before. Orifice: 4.0, 4.5, 5.5. Rotating Nozzle rotates 3 rear jets at 33° for shot blasting, the water unblock pipe, clear and flush debris. Orifice: 4.5..
  • [Widely Used]: Work with lots electric and gas-powered pressure washers up to 4,000 PSI. The sewer jetter hose can be used for pressure washer pump with American standard M22-14 Solid Brass. It also can be connect to trigger gun or pressure washer wand with 1/4″ quick connector..
  • [Tips]: Always disconnect the accessory when finished using it. Do not leave the fitting unattended or under pressure when not in use. If for any reason you’....
Check Stock

Twinkle Star Pressure Washer Adapter Set Quick Connect Kit, TWIS291

  • M22-14 swivel + 3/8" plug, 3/8" QD + M22-14 male.
  • Provides secure and quick fittings, simple to assemble and disassemble.
  • For use on gun, hose, pump to converts the M22 thread-on couplings to a 3/8" quick connector, Compatible with most M22 and quick-connect fittings on pressure washers.
  • SELL 14mm FITTING. INSIDE DIAMETER IS 14mm, NOT 15mm. If your fitting is 15mm, it may cause leakage. SO NOT FIT electric pressure washer of Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce , Simoniz with M22 15mm fitting..
Check Stock

Twinkle Star Pressure Washer Twist Connect M22 14mm X 3/8\ Quick Disconnect Plug High Pressure Brass Fitting Quick Coupler Nipple, 5000 PSI, TWIS281

  • M22-14 female connector +3/8''plug, NOT FIT electric pressure washer of Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce , Simoniz with M22 15mm fitting..
  • For use on gun, hose, pump to converts the M22 thread-on couplings to a 3/8'' quick connector.
Check Stock

Certified Appliance Accessories WI12SSFM Braided Stainless Steel Water-Inlet Hose, 1ft

  • 3/4" MGH (Male Garden Hose) x 3/4" FGH (Female Garden Hose) with washer.
  • Braided stainless steel resists punctures, crimping & kinking.
  • Stainless steel couplings & brass stems provide secure connections.
  • Clear vinyl surrounds flexible & durable PVC inner core tubing that's woven with polyester for added strength under pressure.
  • UPC (Uniform Plumbing Code), NSF 61 (National Sanitation Foundation) & CSA B125.6 (Canadian Standards Association) certified ensures product safety.
  • Meets or Exceeds Industry Certification Standards & Appliance Manufacturer Requirements.
  • UPC certified, NSF/ANSI 61 certified, ASM A112.18.6 & CSA B125.6.
Check Stock

VEVOR Hydraulic Pressure Test Kit, 25/40/60Mpa/9Couplings, Excavator Parts Hydraulic Tester Coupling, Hydraulic Pressure Gauge Kit for Excavator Construction Machinery

  • Accurate Pressure Gauge: The hydraulic gauge kit has three pressure gauges of different ranges: 0-3500PSI/25MPa, 0-5800PSI/40MPa, 0-8600PSI/60MPa. With two units and precise graduations, the meters are accurate in measuring pressure..
  • Interchangeable Test Couplings: Eight interchangeable test couplings are included in this excavator hydraulic pressure test kit, with the sizes of G1/8, G1/4, G3/8, M10/1, M10/1.25, M14/1.5, UNF7/16-20, and UNF9/16-18, which are suitable for many kinds of standard excavators..
  • Durable Materials: This hydraulic gauge test kit contains corrosion resistance gauges and carbon steel couplings with high strength. The working oil filled in the meters effectively avoids vibration and pulsation..
  • Portable Case & 5.25' Test Hose: All parts of the hydraulic pressure test gauge are neatly stored and tightly placed in a thickened plastic toolbox. The compact design makes it save storage space and easy to carry. In addition, three test hoses help extend the pressure test gauge to the inside of the machine for easy reading..
  • Wide Application: This excavator hydraulic pressure gauge comfortably fits for pumps, compressors, hydraulic presses, pneumatic equipment, and motors of various excavators. It is widely applied in construction, shippi....
Check Stock

VEVOR Hydraulic Pressure Test Kit, 25/40/60Mpa/11Couplings, Excavator Parts Hydraulic Tester Coupling Hydraulic Pressure Gauge Kit for Excavator Construction Machinery

  • Accurate Pressure Gauge: The hydraulic gauge kit has three pressure gauges of different ranges: 0-3500PSI/25MPa, 0-5800PSI/40MPa, 0-8600PSI/60MPa. With two units and precise graduations, the meters are accurate in measuring pressure..
  • Interchangeable Test Couplings: Ten interchangeable test couplings are included in this excavator hydraulic pressure test kit, with the sizes of G1/4, R1/4, G3/8, G1/8, M10 x 1, M10 x 1.25, M1/8, M14 x 1.5, 7/16, and 9/16, which are suitable for many kinds of standard excavators..
  • Durable Materials: This hydraulic gauge test kit contains corrosion resistance gauges and carbon steel couplings with high strength. The working oil filled in the meters effectively avoids vibration and pulsation..
  • Portable Case & 5.25' Test Hose: All parts of the hydraulic pressure test gauge are neatly stored and tightly placed in a thickened plastic toolbox. The compact design makes it save storage space and easy to carry. In addition, three test hoses help extend the pressure test gauge to the inside of the machine for easy reading..
  • Wide Application: This excavator hydraulic pressure gauge comfortably fits for pumps, compressors, hydraulic presses, pneumatic equipment, and motors of various excavators. It is widely applied in construction, sh....
Check Stock

XZT 10000PSI Digital Hydraulic Pressure Test Coupling Kit,Repair Test Tools for USA Brand Excavator (10000PSI)

  • 【13 Couplings】This Excavator Pressure Tester Kit comes with 13 different couplings, perfect compatible with Caterpillar, Hitachi, Komutsu, Daewoo, Hyundai, Kato, Kawasaki..
  • 【High-grade Silicone Oil】Our Excavator Pressure Gauges have built-in high-grade silicone oil, which will not turn yellow, has better shock resistance and higher accuracy..
  • 【High-quality Gauges】The housing of our five gauges (150PSI/1500PSI/3500PSI/6000PSI/9000PSI) is stainless steel and Polycarbonate glass, so they are sturdy, durable, impact resistant, and clear display..
  • 【Complete Kit】Comes with 13 x Couplings, 14 x Tee Connectors, 5 x 61.5'' Test Houses, 5 x Pressure Gauges, and 1 x Sturdy PP Suitcase..
  • 【Warranty】We provide 3-year warranty and 24-hour friendly customer service. Pls feel free to contact us if you have any issue about our product..
Check Stock

YFIXTOOL Hydraulic Pressure Test Gauge Kit for Excavator, Includes 12 Couplings, 3 Test Hoses, 3 Pressure Gauges (3500PSI, 6000PSI, 9000PSI)

  • 【High-grade Silicone Oil】Our Excavator Pressure Gauges have built-in high-grade silicone oil, which will not turn yellow, has better shock resistance and higher accuracy..
  • 【12 Couplings】This Excavator Pressure Tester Kit comes with 12 different couplings, perfect compatible with Caterpillar, Hitachi, Komutsu, Daewoo, Hyundai, Kato, Kawasaki..
  • 【High-quality Gauges】The housing of our three gauges (3500PSI/6000PSI/9000PSI) is stainless steel and Polycarbonate glass, so they are sturdy, durable, impact resistant, and clear display..
  • 【Complete Kit】Comes with 12x Couplings, 3x 65'' Test Houses, 3x Pressure Gauges, and 1x Sturdy PP Suitcase..
  • 【Warranty】We provide 3-year warranty and 24-hour friendly customer service. Pls feel free to contact us if you have any issue about our product..
Check Stock

VEVOR Hydraulic Pressure Test Kit 25/40/60MPa, Hydraulic Test Gauge Kit with 6 Couplings, Hydraulic Gauge Kit Made of 304 Stainless Steel, for Excavator Construction Machinery

  • Accurate Pressure Gauge: The hydraulic gauge kit has three pressure gauges of different ranges: 0-3500PSI/25MPa, 0-5800PSI/40MPa, 0-8600PSI/60MPa. With two units and precise graduations, the meters are accurate in measuring pressure..
  • Interchangeable Test Couplings: Six interchangeable test couplings are included in this excavator hydraulic pressure test kit, with the sizes of G1/4, G1/8, G3/8, M14 x 1.5, M10 x 1, and M10 x 1.25, which are suitable for many kinds of standard excavators..
  • Durable Materials: This hydraulic gauge test kit contains corrosion resistance gauges and carbon steel couplings with high strength. The working oil filled in the meters effectively avoids vibration and pulsation..
  • Portable Case & 5.25' Test Hose: All parts of the hydraulic pressure test gauge are neatly stored and tightly placed in a thickened plastic toolbox. The compact design makes it save storage space and easy to carry. In addition, three test hoses help extend the pressure test gauge to the inside of the machine for easy reading..
  • Wide Application: This excavator hydraulic pressure gauge comfortably fits for pumps, compressors, hydraulic presses, pneumatic equipment, and motors of various excavators. It is widely applied in construction, shipping, etc..
Check Stock

ATPEAM Hydraulic Pressure Test Kit Excavator Parts Hydraulic Tester Coupling Hydraulic Pressure Gauge Kit with 11 Couplings for Excavator Construction Machinery 25/40/60 Mpa

  • Specification: Include 3 pressure gauge ranges: 0-25Mpa, 0-40Mpa, 0-60Mpa.
  • 10 stainless steel test couplings: G 1/4, Z 1/4,G 3/8, G 1/8, M 10*1, M 10*1.25, M 1/8, M14*1.5, 7/16, 9/16..
  • Precise: G1/8 quick connector compatible for Caterpillar machines.
  • Feature: It can provide reliable pressure measuring results, very easy to connect and use. Stainless steel couplings, anti-rust, leakage-proof and better than those aluminum products on market..
  • Complete Set: This is an accurate Excavator Hydraulic Pressure Test Kit. Set include: 3 x pressure gauge, 3 x test hoses, 10 x couplings and 1 x quick release coupling. Portable to carry with aluminum case..
  • Wide Application: Test tube connects the gauge for direct reading.
  • Wear-resistant tube, impact-resistant with good elasticity.
  • Widely used at construction, machinery, shipping, mining, petroleum, chemical industry etc..
Check Stock