Reviews Pressure Seals

Airpro Fork SBK-201 Snowbike Bottoming Kit

  • Patented fork seal features a balanced 3 lip design that evenly distributes the pressure reducing operating temperature, wear and friction..
  • Custom Elastomer Fork Seals have been tested to outlast OEM fork seals..
  • Extends typical seal life by 3 to 5 times over OEM seals..
  • Stiction (friction) measures from 1/3 to 1/2 less than OEM seals for smoother fork action..
  • Lower Stiction, Longer Life! It doesnt get any better than this!.
Check Stock

Espresso Machine Head Gasket Group Brew Seal For Cuisinart EM-100 EM100 EM-200 EM200 Espresso Machines

  • Available for sale is a brand new replacement Brew Head Seal for the Cuisinart EM-100 and EM-200 Espresso Machines. These are extremely hard to find, but are simple to replace. This is a BRAND NEW item still sealed in the original plastic packaging.
  • These seals secure your portafilter to the brew head when making espresso. Heat and pressure causes the silicone wear out over time which leads to your machine leaking water. Since these machines are 15-Bar units, the higher pressure causes the seals to leak when the seals age and they need to be replaced every 4-6 months depending on how much your machine is used..
  • For Cuisinart models : EM-100 and EM-200.
Check Stock

Geula Slow Cooker Liners 2 Pack = 20 Bags Fits 3-4 Quart Pots

  • 6qt Crock-Pot (TM) Pressure Cooker Compatible: Our replacement gaskets / seals / rings are specially designed to only fit the Crockpot (TM) 6 quart....
  • Ideal Replacements: Pressure cooker sealing rings wear out and absorb smells/flavors over time. Our gaskets are a great replacement for your 6 quart....
  • Robust Construction: Made from thick, heavy-duty, high-quality, durable, food-grade silicone, our seals are do not have BPA or phthalate. For best....
  • Fitment Information: Only for use with crock-pot (tm) 6 quart multi-cooker. Not designed for use with other pressure cooker brands.
  • Please note: This is an aftermarket replacement product (produced by Impresa) meeting or exceeding the quality of OEM rings (based on in-house....
Check Stock

COG Rotary Shaft Oil Seal Mechanical Metric NBR Seals with Double Lips Spring Wear Resistance and Sealing Effect TC 25x42x10 NBR 10PCS

  • Type: CO G-xTCx25 Double Lips Oil Seals003cBr003e Metric oil seals, replacement part for aftermarket.
  • Design: Carbon Spring,Carbon skeleton,70 Shore A Nitrile Rubber.
  • Recommended on the occasion of low pressure without dust.Max Pressure 0.05MPA (0.5kgf/cm2).
  • Nitrile Rubber Temperature Range: -40º ~125º C.(-40°F~ 257°F).
  • COG Oil seals are widely used in various devices, such as Automobile, motorcycle, industrial automation, household appliances, driving machinery as well as general motors.
Check Stock

COG Rotary Shaft Oil Seal Mechanical Metric NBR Seals with Double Lips Spring Wear Resistance and Sealing Effect TC 35x52x10 NBR 2PCS

  • Type: TC 35x52x10 NBRDouble Lips Oil Seals003cBr003e Metric oil seals, replacement part for aftermarket.
  • Design: Carbon Spring,Carbon Skeleton,70 Shore A Nitrile Rubber.
  • Recommended on the occasion of low pressure without dust.Max Pressure 0.05MPA (0.5kgf/cm2).
  • Nitrile rubber Temperature Range: -40º ~125º C.(-40°F~ 257°F).
  • COG Oil seals are widely used in various devices, such as Automobile, motorcycle, industrial automation, household appliances, driving machinery as well as general motors.
Check Stock

DAN SPEED S316 Stainless Steel Vertical Check Valve,Spring Loaded In-line Low Cracking Pressure 2 inch

  • Body Material:Stainless Steel SUS/SS316,Cracking Pressure:4.5 psi.
  • Working Temperature:-51°C to 232°C (-60°F to 450°F),Seals:NBR.
  • Max Pressure:1000 Psi For Water,Oil,Gas (WOG1000),Port Types:BSPP Female x BSPP Female.
  • Vertical check valves may be used for any application. They utilize a spring system which shuts the Disc closed when there is not enough pressure to hold it open by the operating fluid. Fluid pressure in the backwards direction will cause the valve to close to prevent backflow.
  • Check valves are used to help direct flow in one direction.The stainless steel bodies and PTFE seals are highly corrosion resistant allowing these check valves to be used with a wide variety of fluids including, but not limited to water, oil, gas, air, light alkali's, acids, biodiesel, fuels and alcohols.
Check Stock

Smith Performance Sprayers 190448 Concrete Sprayer 3.5 Gallon Capacity Stainless Steel

  • 3.5 gallon capacity AISI-304 grade stainless steel tank (no need for epoxy coatings) built to withstand harsh concrete chemicals along with rugged....
  • Brass, 24 inch wand and shut off with the highest quality Viton seals for maximum chemical resistance.
  • Four prong locking mechanism secures the pump tightly against an internal O-ring and also prevents over compression.
  • Faster, easier repair - pump seals can be changed within minutes, which equals less downtime.
  • Pull button pressure release valve safely releases internal pressure prior to opening the tank.
Check Stock

6.0 Blue Spring Kit Upgrade - Fuel Regulator Kit - Compatible with Ford Trucks - Blue Spring Kit 6.0 Powerstroke F250, F350, F450, F550 2003, 2004, 2005, 2006, 2007-Replaces 3C3Z-9T517-AG, 3C3Z9T517AG

  • Increase fuel pressure for increased performance. This upgrade will increase the fuel pressure 10-15psi on your 6.0 powerstoke. Increases the life of fuel injectors too..
  • Easy To Install. The 6.0 blue spring kit includes all the gaskets, seals, bolts, spring, and regulator housing needed for installation. This fuel regulator kit includes a detailed installation video (link included in packaging) with step by step instructions for the blue spring upgrade..
  • Compatible with Ford 6.0L Powerstroke Trucks - F250, F350, F450, F550 model years 2003, 2004, 2005, 2006, 2007.
  • Equivalent to factory part 3C3Z-9T517-AG Perfect for stock or modified trucks. The 6.0 Blue Spring Kit is a common upgrade because it increases injector life, increases drive-ability, and gives smoother power delivery..
  • Complete kit with everything needed for installation on your 6.0 Powerstroke: blue spring upgrade, 4 rubber o-ring seals, 3 orifice seals, 4 screws, fuel pressure regulator housing.
Check Stock

XLBH Machinery Seal 155-10/11/12/13/14/15/16/17/18 10mm 11mm 13mm 14mm 15mm 16mm 17mm 18mm Inner Diameter Single Coil Spring Bellows Mechanical Seal Tightly Sealed (Color : 1pc 14mm)

  • Type: SC 20x42x7 NBR Single lip Oil Seals Metric oil seals, replacement part for aftermarket.
  • Design: Carbon Spring,Carbon Skeleton,70 Shore A Nitrile Rubber.
  • Recommended on the occasion of low pressure without dust.Max Pressure 0.05MPA (0.5kgf/cm2).
  • Nitrile rubber Temperature Range: -40º ~125º C.(-40°F~ 257°F).
  • COG Oil seals are widely used in various devices, such as Automobile, motorcycle, industrial automation, household appliances, driving machinery as well as general motors.
Check Stock

ChromaLabel 1 Inch and 2 Inch Round Clear Wafer Seal Bundle, 1000 Roll

  • The Wafer Seals in this Bundle are backed with a Pressure-Sensitive adhesive keeps each 1 inch seal in place.
  • 1000 total round tabs come on a 1 inch diameter core and are cleanly shrink wrapped.
  • The seals are made from durable crystal clear polystyrene.
  • These seals can be used for mailing personal thank you cards, invitations, and small packages.
  • All ChromaLabel products are proudly made in Kansas, the Heartland of the USA.
Check Stock