Reviews Press fit Diode - BestBuyersPro.com

AITRIP LCR-T7 Transistor Tester TFT Diode Triode Capacitance Meter LCR ESR Meter for Measuring Triodes Diodes Resistors Capacitors, Inductors, Thyristors

This LCR-T7 Transistor Tester Built-in high capacity rechargeable lithium ion battery. Lithium ion battery voltage detection..
Used to detect NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery etc.
Automatic detection of zener diode 0.01-30V, self test with automatic calibration.
The data code and infrared waveform will be displayed,when the detector is successfully decoded(tips:After detection, align the infrared remote control with the "IR" light, then press the button in the remote control).
One key operation. Auto power off (timeout settable)..

【Diode Tester】Our diode Test meter maximum display 3999, support diode and triode test function, support NCV function.
【Auto Range 】UT136B+ automatic range digital multimeter with capacitor and frequency for easy operation.
【Safety Operation】Safety level CAT II 1000V, CAT II 600V, passed the 1m drop test. Voltmeter can measure AC and DC voltages up to 1000V and can measure currents up to 10A (20A at 30S measurement time).
【Protection】Full featured mis test protection, can withstand 1kV voltage shock, and is more convenient to use.
【Multifunction Test】Support on off test, data hold, auto power off, low voltage display and screen backlight.

Universal CPU water block: EK-Supremacy EVO (incl. LED diode, mounting- & thermal material).
Compression fittings: EK-ACF Fitting 13/10mm – G1/4 Nickel (8 pcs).
Radiator fan: EK-Vardar F3-120 (1850rpm) (3pcs).

100mW Module: This is a 100mW module that can emit a 405nm blue-violet ..
Adjustable focus design: dot diode module adopts adjustable focus design.In other words, the spot size of this dot diode module is adjustable..
High Reliability Material: This dot diode module is made of durable copper shell for long life..
Continuous output: This dot diode module supports continuous output and can be used for a long time..
Application: This dot diode module is designed for engraving machine, cutter and so on..

【SPECIAL MEASURING】This meter is specially used to measure SMD(surface mounted device).
【WIDELY APLLICATION】This HP-990B handheld diode meter is suitable for agricultural, home appliance, industrial and office use..
【AUTOMATICALLY DIODE】This handheld diode meter will be off automatically after 15minutes when there is no operation..
【LARGE LCD DISPLAY】This HP-990B handheld diode meter is with large LCD make you read easily..
【UNIQUE HANDHELD DESIGN】This HP-990B handheld diode meter is handheld design, easy to grip and use..

100mW Module: This is a 100mW module that can emit a 405nm blue-violet ..
Adjustable focus design: dot diode module adopts adjustable focus design.In other words, the spot size of this dot diode module is adjustable..
High Reliability Material: This dot diode module is made of durable copper shell for long life..
Continuous output: This dot diode module supports continuous output and can be used for a long time..
Application: This dot diode module is designed for engraving machine, cutter and so on..

For detecting NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery, resistor and capacitor and other components, etc..
Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly. ( Use 12864 liquid crystal display with green backlight)..
Measurement results represent by TFT graphic display(160x128). Support Chinese and English..
After detection, align the infrared remote control with the "IR" light, then press the button in the remote control, if the detector successfully decode it, it will display the data code and infrared wave form..
One button operation, automatically detect and shutdown, and you can also press the multi-functional button to close the detector..

This transistor tester is built-in large-capacity rechargeable lithium battery-350mAh Included, lithium battery voltage detection, Automatic measurement of voltage stabilizing diode (0.01-30V)..
After detection, align the infrared remote control with the "IR" light, then press the button in the remote control, if the detector successfully decode it, it will display the data code and infrared wave form..
Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly..
Operating Instructions : Short press: Press the key and not less than 10 ms, release key within 1.5 seconds.
Long press: Press the key more than 1.5 seconds.

Automatic detection of NPN and PNP transistors, n-channel and p-channel MOSFET, diode (including double diode), thyristor, transistor, resistor and capacitor and other components.
Can detect the transistor, MOSFET protection diode amplification coefficient and the base to determine the emitter transistor forward biased voltage.
Can be in the correct order and the diode symbol display two diodes , and gives the diode forward voltage.
measure capacitanceCan measure capacitance of 30pF-100mF , resolution 1pF.
Package: 1 * LCR-T4 Mega328 Transistor Tester 1* LCR-T4 Mega328 Transistor Tester Case.