Reviews Press Components

HighTop Automatic Desoldering Pump Vacuum Solder Sucker Tool Portable AC110V 30W Electric Desoldering Gun Repair Solder Removal Tool Solder Sucker Iron Tin for DIY with 3 Soldering Suction Tips

  • 【 Strong suction】 This desoldering pump with Strong suction . hollow tip design makes desoldering through-hole components a breeze ..
  • 【 Perfect desoldering tool】This desoldering tool for thick-film integrated circuits and large components with big welding joints.It pulls the solder right away leaving a clean solder pad..
  • 【Heat up Quickly 】Solder sucker Power source 110V 30W with US Plug let it warm up 5 minutes , and press the side button for suction Note :The item is not full-automatic, you need to use heating equipment together as assist.
  • 【 Price is cheaper and 3 Soldering Suction Tips】Desoldering suction pump is less expensive, but it does its job well enough.
  • 【Widely Used As You Want】soldering sucker iron Tool is widely used for welding circuit board, appliance repair, Home DIY hobby, jewelry welding. You can take it anywhere and you will be able to find the tools you need in the carry bag.
  • 【DIY】 it is a stand alone unit. Simply plug it in, let it warm up, and press the side button for suction.
  • 【Easy Operate】hollow tip design makes desoldering through-hole components a breeze.
Check Stock

2.38 Gallon Heavy-duty Cross-beam Stainless Steel Fruit and Wine Press

  • Swing Cross Beam Apple & Cider Press - The strong cast iron crossbeam is swung open for easy filling of the press, or milling apples directly into the basket..
  • Premium Components - cast iron for the base plate, legs, spindle nut and crossbeam, stainless steel for the basket and the handle, this press should last a lifetime..
  • Delivered Fully Assembled - No wooden blocks needed,stainless steel two-handed press arm for ease of use,holes in feet for added stability,low maintenance.Press bag available for cleaner operation.
  • Easy To Clean - Simply hose down with fresh water after use the fruit wine press and dry with a clean cloth. Lubricate the non-food contact metal parts with food grade grease.
  • this will also inhibit corrosion of these parts. Store in a clean, dry place..
  • Multifunction Cider Wine Press - This fruit presses are suitable for pressing juice from pre- shredded apples, grapes, red currants and many other fruits, vegetables and berries. It can also be used for pressing rhubarb, honeycomb, tomatoes, macerated tobacco or citrus fruit..
Check Stock

POWERTEC 71633 Woodworking Fence Kit for T-Slot Drill Press Table Tops

  • INCLUDES: (1) T Slot Fence, (2) Drill Press Hold Down Clamps, (1) Fence Flip Stop, and (1) Hardware kit including Multi Track Brackets with Clamping....
  • FUNCTION: A premium selection of drill press table accessories needed to take your drill press projects to the next level. Helps delivers professional....
  • COMPATIBILITY: This fence hardware kit serves as the perfect add-on to any t-slotted drill press table and woodworking professional. These components....
  • MULTI T-TRACK FENCE: Laser etched scale, 24 inches long with exceptional straightness - Reversible profile for left or right measure, spaced 3/4”....
  • UNIVERSAL: Features a pair of adjustable woodworking clamps equipped with 5 star knobs that offer easy tightening and a comfortable grip to help put....
Check Stock

BioChef Quantum Whole Slow Juicer - With powerful 300 W motor wide chute 3.15 x 3.15 inch & many accessories in burgundy

  • MULTIPURPOSE JUICE MAKER - Suitable for use as a vegetable and fruit press (e.g. lemon press, orange press or electric juice press) and ideal for both....
  • FOR NUTRITIOUS JUICES, SORBETS & NUT MILK - The key advantage of gentle cold pressing is the preservation of temperature sensitive vitamins and....
  • LOW-MAINTENANCE SLOW JUICER (COLD PRESS) – Juicer operates at 32 revolutions per minute to gently extract the juice.
  • HIGH PERFORMANCE AND COMPACT JUICER – 300 W power for best results with wide chute (3.15 x 3.15 inch) - Free of BPA, BPS, PVC, phthalate and....
  • WIDE RANGE OF EASY TO CLEAN COMPONENTS - 1 fine strainer, 1 extra-fine strainer, 1 coarse strainer, 1 sorbet strainer, 1 cleaning brush, 1 fine....
Check Stock

Bath Bombs Press Machine Bath Bomb kit with Set of 2 Bath Bomb Molds Bath Bombs for Women Men DIY or Commercial Use No Assembly Required

  • QUICK AND EASY: This Bath Bombs Press is made of high quality components. The bath bomb maker No Assembly Required and can easily press bath bomb....
  • METAL CONSTRUCTION: Constructed from all metal parts, this manual bath bomb press is built to last. Designed for both home and commercial use, you....
  • GREAT FOR COMMERCIAL USE: If you make bath bombs to sell, bath bomb maker is a must! It’s so much quicker than doing it by hand, tremendously....
  • WORTH NOTING THAT: 1.) Do not not apply too much pressure. 2.) Try a few times to get the right recipe dosage, put it in the hand press Press on the....
  • INCLUDES A SET POLYETHYLENE MOLDS: This bath bomb press comes with a set molds – measuring 2” , using polyethylene material, perfect spherical....
Check Stock

HPYNPES DIY Practical Soldering Practice Kit Practice Learning Electronics Training Board

  • Product introduction: Shake the lucky turntable by NE555 and CD4017 chips combined with LED random output function. The control terminals are button control and vibration switch control. You only need to press the button or shake it, the LED will start to rotate, and the After a while it stops randomly, leaving only one LED light..
  • Designed for Beginners：Special design for electronics starter to learn to solder electronics components. Soldering project kit will improve your electronic knowledge and soldering skills in practice.
  • Easy to Assemble： Electronic DIY kits uses safety materials, effectively avoid corrosion and wear out. Components’ names have been marked on the PCB board and the circuit design is simple. Even beginners can easily solder successfully.
  • Warm Reminder ：DIY electronic components kit requires buyer to assemble and welding, If you don't have any soldering experience, please read the soldering instructions and use soldering tools carefully to avoid safety problem.
Check Stock

POLIVIAR FPB10-JP French Press 0.3 gal 1 L Coffee Press Vacuum Insulated Coffee Maker Stainless Steel Rustproof Durable Large Capacity Lightweight Disassembly Cleaning For Home Use Black

  • PACKAGE INCLUDES: Complete French Press filters replacements including Spiral Disk, Cross Disk and a Coffee Press filter screen which will work....
  • DURABLE MATERIAL: All the components including the 3.75 inch French Press filter are made of Stainless Steel. Even the Stem on the cross disk is....
  • MULTIPLE USE CASES: These parts can be used in both 8 espresso cup 32 | 34 ounce and 4 espresso cup 17 ounce coffee press filters. These are universal....
  • EASY TO CLEAN AND WASH: Simply rinsing your coffee press filter under the tap for a few seconds. A quick wash can clear out the grinds using this....
  • FINE FILTRATION: Our French Press mesh filter is precisely and carefully designed to leave behind absolutely no grounds in your coffee. Give it a try....
Check Stock

Dorman 950-006 Wheel Bearing and Hub Assembly for Select Toyota Models (OE FIX)

  • Pre-pressed assembly - this hub includes all necessary components ready for install right out of the box.
  • Saves hours - eliminates work required to replace individual corroded components.
  • Simple solution - no need for shop press to perform complete bearing repair.
  • Quality engineering - designed in the United States and backed by decades of automotive aftermarket experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage.
Check Stock

Penn State Industries PRESSCOMBO Pen Turning Blank Drilling Centering Vise and Assembly & Disassembly Press Combo Package

  • Includes PENPRESSXL Assembly & Disassembly Pen Press and DRILLCENT3 Pen Blank Drilling Centering Vise.
  • DRILLCENT3 is used to drill through the exact center of pen blanks up to 1-3/4" square.
  • Includes (1) 2" x 1/4" scrap waste sleeve.
  • PENPRESSXL is used to both assemble and disassemble pen parts on one easy to use tool.
  • Acts as traditional pen press to press your pen parts together.
  • Disassembly function provides invaluable way to take virtually any pen apart.
  • PENPRESSXL included components: (1) press assembly with adjustment sled and handle, (6) disassembly rods, (1) spring-loaded stopper, 6" of soft-grip tubing, (1) 7mm mechanism bushing for parts protection.
  • The (6) PENPRESSXL disassembly rods handle nearly all tube diameters and parts configurations all of your pen making projects.
Check Stock

PSI Woodworking PENPRESSXL Assembly & Disassembly Pen Press

  • Assemble and disassemble pen parts on one easy to use tool.
  • Acts as traditional pen press to press your pen parts together.
  • Disassembly function provides invaluable way to take virtually any pen apart.
  • Included components: (1) press assembly with adjustment sled and handle, (6) disassembly rods, (1) spring-loaded stopper, 6" of soft-grip tubing, (1) 7mm mechanism bushing for parts protection.
  • Spring-loaded ram acts as a 3rd hand for quick, easy parts positioning.
  • Sled mechanism slides the stop into position.
  • Locking lever then securely locks the rod in place.
  • The (6) disassembly rods handle nearly all tube diameters and parts configurations, including pen tips and clips.
  • Dedicated 7mm bushing allows for disassembly of any 7mm pen.
  • Soft-grip tube and V-profile clamp provides parts protection during disassembly process.
Check Stock