Reviews Premium Sharpening Belts

1X30 Super Strop Beginner Knife Sharpening Belt Kit W/ 15 Pack Sanding Belt Assortment and 1X30 Leather Honing Belt Detailed Instructions Included

  • The Super Strop 1X30 Beginner Knife Sharpening Belt Kit is the perfect accessory to begin sharpening knives and tools from start to finish on your 1x30 Belt Sander. Our custom 1X30 sanding belt grit progression can sharpen a range of knives and tools. Even if your blade edges are chipped, rusted or need to be retipped, these 1x30 sharpening belts can handle the job. Your Beginner Sharpening Belt Pack includes 15 abrasive sharpening belts in 5 different grits of Silicon Carbide.
  • We’ve included our enhanced sharpening instructions for beginners. Even if you’ve never successfully sharpened a knife, we take you through the basics of sharpening to getting a razor sharp edge every time. Our clear cut instructions help you understand how to assess a blade's edge both before and after sharpening. Our sharpening guide will save you the time of trial and error..
  • Our 1x30 Grit progression is no accident. We’ve personally designed this grit belt progression after years of testing and is our most highly recommended kit for beginner sharpening on a 1x30 Belt Sander. While most knife sharpening belt kits stop at 1000 grit, we’ve included our popular 1X30 Super Strop Leathe....
Check Stock

Work Sharp CPAC005 Master Kit Replacement Sharpening Belts, Blue

  • Replacement belts for the Work Sharp culinary E5 upgrade kit.
  • Specialty sharpening belts specifically for sharpening 15 Degree and 20 Degree edges.
  • Belts only, E5 sharpener and upgrade kit sold separately.
  • The Work Sharp Culinary Master Belt Kit is a full set of replacement belts for the E5 Upgrade Kit (sold separately).
  • The Master Belt Kit includes two (2) P120 red sharpening belts, one (1) P120ZA blue sharpening belt, one (1) X30 grey sharpening belt, and one (1) X4 white sharpening belt.
Check Stock

Knife Sharpening Angle Guide With 15 Pack Sharpening Sanding Belt Assortment

  • Knife Sharpening Angle Guide fits 1×30 Belt sanders and includes a Broad assortment of sharpening Sanding belts to get you sharpening right away..
  • Pack includes1X30 Assortment 3 each 120 Grit, 220 Grit, 400 Grit, 800 Grit 1000 Grit Sharpening sanding belts. ..
  • Knife Sharpening Angel guide Easily Installs on the Platen with no tools needed for installation..
  • Quickly and accurately maintain your angle when sharpening on your 1×30 Belt Sander.
  • Take the guess work out of your angle while Knife Sharpening on a 1X30 Belt sander. The Assorted Starter Pack of 1×30 sharpening sanding belts includes the grit belts necessary to sharpen any knife or blade.
Check Stock

Work Sharp Culinary CPAC004 East and West Guides Upgrade Kit, Multicolor

  • The E5 Upgrade Kit adds versatility with 15° and 20° sharpening guides, and specialty sharpening belts optimized to create traditional East and West edge profiles..
  • The East/West sharpening guides easily snap into place of the standard guides, while the included storage tray keeps your other guides organized..
  • The E5 Upgrade Kit includes 4 types of belts: one Blue ZA Coarse belt, two Red P120 Medium belts, one Grey X35 Fine belt, and one White X4 Extra-Fine belt..
  • Manufactured by Norton Abrasives, the NORaX brand sharpening belts are the same belts professional knife makers and sharpening services use to create factory-fresh cutting edges. The belts are gentle on knives while creating an amazingly sharp edge – even on today’s most advance cutlery steels..
  • Abrasives are designed to sharpen without removing excessive material, protecting the value of your kitchen knives. The belts are engineered to expose fresh abrasive as they’re used, producing consistent sharpening results throughout the life of the belt..
Check Stock

1X30 Knife Sharpening Belt Kit with Super Strop Leather Honing Belt & 15 Pack of Premium Quality Silicon Carbide Sharpening Sanding Belts 600 800 1000 Grit

  • 1X30 Leather Strop Knife Sharpening Belt Kit | 5 EACH 600 grit, 800 Grit & 1000 grit silicone carbide belts 15 Abrasive Belts total & 1 Leather Strop....
  • 1 in. x 30 in. Super Strop Leather Strop Honing Belt buffing compound included. Give Every Tool in Your Shop a Scary Sharp, Professionally Polished....
  • 1-2 oz. White Diamond Buffing Compound Included Estimated Grit of 10,000 with Aluminum Oxide Abrasive. The White Cutting Compound is perfect for....
  • A great starter package for knife sharpening on your Harbor Freight 1X30 Belt Sander! 5 each 600, 800 and 1000 grit sharpening belts for a total of 15....
  • SUPER STROP LEATHER HONING BELT GUARANTEE | SUPER STROP Premium Leather Honing Belts are guaranteed against manufacturer defects, material defects &....
Check Stock

2X42 Super Strop Leather Honing Polishing Belt For 2X42 Belt Sanders (2X42 Leather Belt)

  • 2X42 Super Strop Leather Honing Polishing Belt Super Strop Leather Honing Stropping Belt is fantastic addition to sharpening with a 2X42 Belt Sander. Not only can you use this Leather Strop as the last stage of sharpening, but you can also use it to maintain an edge in between sharpening..
  • Premium Made in USA Buffing compound and brief instructions included. The White Buffing compound is an ultra fine abrasive that is specifically designed to be applied to the Leather Stropping Belt. The buffing compound will help to refine the edge of your knife, removing very small fragments of the Burr or Wire Edge. Removing these fragments can extend the life of the edge..
  • 2 in. X 42 in. Super Strop Leather Honing Belts are made slightly short and may require stretching to be installed. If you believe your belt is too small, Contact us today! We strive to provide the best customer service & support!!.
  • Sharpening with professional results has never been easier on a 2×42 inch belt sander. Fits Popular belt sanders the Harbor Freight, Wen, Rikon and nearly every other 2X48 sander..
  • SUPER STROP LEATHER HONING BELT GUARANTEE | SUPER STROP Premium Leather Honing Belts are guaranteed against manufacturer defects, material defects & User Error. If your Leather Honing Belt o....
Check Stock

Work Sharp Kit Replacement Sharpening Belts, Red

  • Replacement Belt Kit Includes Three Red P120 Medium Belts and Fits the E5 and E3 Sharpeners..
  • Professional Grade Abrasive Belts for Sharpening and Honing. the Abrasives Are Engineered to Constantly Expose a New Surface As They Wear, Creating Consistent Results Throughout the Life-Cycle of the Belt..
  • Manufactured by Norton Abrasives, the Norax Brand Sharpening Belts Are the Same Belts Professional Knife Makers and Sharpening Services Use to Create Factory-Fresh Cutting Edges..
Check Stock

Work Sharp Knife & Tool Sharpener - precision sharpening guides, premium flexible abrasive belts, repeatable and consistent results, Frustration-Free Packaging

  • Sharpen every knife you own like a pro quickly, easily and with repeatable, consistent results. Creates the sharpest blades you’ve ever had!.
  • Easily Replaceable Abrasive Grit Belts. Comes with premium abrasive belts to meet all your sharpening needs: Coarse (P80), Medium (P220) and Fine (6000). Abrasive belts won’t burn or damage blade steel during sharpening..
  • Precision sharpening guides provide fast, easy, repeatable and consistent results. Kitchen Knife guide sharpens blades to a 40° angle – Outdoor Knife Guide sharpens to a 50° angle..
  • Can also be used to sharpen a wide range of bladed shop tools and lawn and garden tools such as Lawn Mower Blades, Garden Pruners, Shears, Shovels, Scrapers and more. Also makes the ideal hand held detail grinder.
  • 1-year warranty – warranty only valid for North American 110v power source applications. Use of power converters for 220V not recommended. Can be run with 12V power inverter (min. 150 watt) from car, truck, RV, boat, etc..
Check Stock

30 Pcs 1/2" x 12" Replacement Sharpening Belt Kit for Official Work Sharp Knife & Tool Sharpener (WSKTS & WSKTS-KT / Mk.1 & Mk.2) - 80/120/240/400/1000/2500 Grits

  • Compatiblity With: The 1/2" x 12" Replacement Belt Kit compatible with Official Work Sharp Knife & Tool Sharpener (WSKTS & WSKTS-KT / Mk.1 & Mk.2).
  • Package Included: 30 Packs 1/2" X 12" Knife Sharpener Sanding Belts: 5 pcs 80 Grits Zirconia belts, 5 pcs 120 Grits Zirconia belts, 5 pcs 240 Grits Alumina belts, 5 pcs 400 Grits Alumina belts, 5 pcs 1000 Grits Silicon Carbide belts, 5 pcs 2500 Grits US-Alumina belts.
  • Premium Abrasives: The material for coarse 80/120 grit is zirconia, medium 240/400 grit is alumina, fine 1000 grit is silicon carbide, and the polishing 2500 grit is US pyramid alumina. Wear-resistant and long lasting.
  • Wide Application: These Different Grinding belt Set meet all your sharpening needs. Derusting, deburring, blade edge sharpening, welding spot grinding and polishing for metal, wood, fiberglass, rubber, plastic etc.
  • Stable and Strong Joints: The joint is flat and smooth, dual directional tape joint allow a smooth transition in either direction, there is no jumping during the grinding process, safe grinding..
Check Stock

Work Sharp WSSAKO81114 Tool Grinder Attachment Replacement Belt Kit

  • Extra Coarse Grit Replacement Abrasive Belt Kit for the Work Sharp Knife & Tool Sharpener Ken Onion Edition (WSKTS-KO)..
  • Kit includes (5) P120 Extra Coarse Grit Norton Ceramic Belts..
  • Belts are 3/4" x 12" and ONLY fit the Ken Onion Edition Sharpener and Tool Grinding Attachment..
  • These premium grade, engineered abrasives are long lasting and designed for knife & tool sharpening and grinding applications..
  • Belts are manufacted in the USA by Norton Abrasives for Work Sharp..
Check Stock