Reviews Precision Digital Level

Bosch Bluetooth Enabled 330-Foot Lithium-Ion Laser Distance and Angle Measurer GLM 100 C

  • UPGRADES: Features Bluetooth functionality to conveniently transfer and store measurements from the laser measurer to a smart device via free app. Also includes backlit display with tilt-screen technology for easy viewing in all directions..
  • PRECISION: The laser tool’s Precision Measuring Technology with extreme accuracy measures distances up to 330-feet to within 1/16-inch..
  • ACCURACY: The Bosch GLM 100 C features a built-In tilt sensor to displays 360-degree angle measurements in two axis allowing for more accurate measurements..
  • LEVEL: Option to add the R 60 digital level attachment to transform the GLM 100 C into a 24-Inch digital laser level (not included)..
  • VERSATILE: Offers ten measurement modes including length, area, volume, angle, min/max, continuous, single indirect height, single indirect length, combined indirect height, and multi-surface are measurement for maximum versatility..
  • Class IIa laser product, ≤1mW power output.
Check Stock

Proster 0-225° Digital Angle Finder LCD Protractor Angle Gauges Spirit Level 400mm/16 inch Vertical Horizontal Dual Spirit Level for Carpenter Woodworking Home Decoration

  • 【Range & Precision】Measuring range is 0-225° (vertical and horizontal) at a measuring precision of 0.5°. （NOTE: It is not a digital level）.
  • 【Easy Reading】Easily readable LCD display shows the exact measuring results at once with data holding function..
  • 【Convenient Design】HOLD button to lock angle.
  • 【Application】Perfect to measure the exact angles such as trays, sloping roofs and handrails, while can be used in lineation for woodworkers..
  • 【Friendly Details】Automatically shut off after five minutes to prolong the life of batteries with low power alarm.
Check Stock

5V Mic Microphone Sensor Module, High Sensitivity & High Accuracy Voice Detection Sound Detection Module, Adjustable Gain Analog Output

  • INMP441 is a high-performance, low-power, digital output omnidirectional MEMS microphone with a bottom port..
  • With MEMS sensor, signal conditioning, analog‑to‑digital converter, anti‑aliasing filter, power management and I2S interface..
  • The microphone outputs the signal on the left channel when the level is low, and outputs the signal on the right channel when the level is high..
  • With flat broadband frequency response and high signal‑to‑noise ratio, it can produce high‑definition natural sound..
  • The microphone module has a 24‑bit digital I2S interface with high‑precision data, and the output performance is stable..
Check Stock

eOUTIL Digital Level Angle Finder Waterproof IP65 Protractor Angle Gauge Inclinometer with V-Groove Magnetic Base/0~360 Degree

  • V-groove Magnetic Base: This magnetic V-groove base of digital angle gauge can be firmly attach to ferrous metal surfaces like pipe, steel construction framing, metal fabrication. Rugged durable aluminum frame for precision leveling measurement.
  • Absolute & Relative Measurement: This digital protractor has absolute angle measurement to test whether the working surface is on the level to check roof slopes, wheel alignment, etc. Moreover, this magnetic level lets you check the relative angles between the surfaces.
  • High Accuracy: Accurate to the ±0.1° at 0° and 90°.
  • ±0.2° at other angles. Displays angle and bevel readings in degrees, pitch IN/FT, mm/M, and percent slope. With reading hold function, it is convenient to record by this level digital inclinometer bevel box. Moreover, you can have an accurate measurement of the angles between two measured surfaces.
  • Backlight LCD Display With Audio Indicator: Featuring a large, bright LCD display you can easily read the measurements whatever the light conditions. The display value reverses automatically when the electronic level is upside down. Acoustic signal routing via beeps when you reached 0° or 90°.
  • IP65 Waterproof And Dust-proof Level: It has IP65 protection which makes it suitable for use in harsh ....
Check Stock

Digi-Pas 2-AXIS ULTRA-Precision Digital Level 1-acrsec (0.005mm/M), Inclinometer, DWL8500XY + PRO Software (NIST-Traceable)

  • Digi-Pas 2-AXIS, ULTRA-Precision, Wireless, Digital Level/Inclinometer, REVOLUTIONIZE precision alignments by SIMULTANEOUSLY display both X&Y axis level states WIRELESSLY on your Smartphone, Tablet and PC screen while you are adjusting machine footings. This allows with ONE-MAN operation, thus completely eliminates using 2 units of single-axis levels, with TWO-MEN operation as experienced on Old-fashioned Spirit level or single-axis inclinometer..
  • Tedious repetition on going ‘back-and-forth’ checking 'bubble' level position in-between tiny graduation lines is NOW THINGS OF THE PAST. Digi-Pas SMART LEVEL greatly CUT-DOWN precision alignment TIME (by >70%) and in combine with one-man operability allow GREAT COST SAVING as well as improve QUALITY of installation, setup & maintenance of large-sized CNC machines, XY-Table Ball-Screw STRAIGHTNESS & SURFACE FLATNESS and equipment requiring delicate alignments or sensitive to vibration..
  • Real-time MONITORING and LOGGING (save in Excel) on leveling states, planar angles, 3D straightness/surface-flatness profiling and VIBRATION amplitudes. ANALYSIS on both static & dynamic positional stability....
Check Stock

Digital Angle Finder, Tadeto Digital Level Inclinometer Protractor Laser Level 3 in 1 Magnetic IP54 Waterproof Angle Gauge with Large LCD Screen Backlight Type-C Fast Charging

  • ...2 modes to suit different measurement needs. A horizontal laser line can be emitted from the left and right side of the product to help mark it clearly. This measuring tool provides the most accurate results for your home decoration wall art or other DIY projects..
  • 【High Precision and 4 Measuring Units】 The digital angle finder is designed for an accuracy of ± 0.2° with a resolution of 0.01°. Measuring range: 0 to 360° (4*90°). The digital angle finder offers 4 selectable angle measurement units, °/%/in/ft/mm/m. It uses a Class II laser limited to 1 mW continuous wave and is safe for everyday use..
  • 【Large Screen and LCD Backlight】 The Tadeto angle finder has a circular design with a much larger than normal screen. 1.44" screen with its own LCD backlight makes the data display larger and clearer, even in very low light areas. The display is also automatically reversed when the tool is turned upside down. In addition, the digital level will automatically switch off after 5 minutes of inactivity to save battery power..
  • 【Fast Charging】 The Digital level has a built-in 300 mAh lithium battery that lasts up....
Check Stock

Digital Angle Finder Protractor 0-360 Degree T-Bevel Gauge & Protractor with Horizontal Vertical Bubble & Full LCD Display for Woodworking, Metalworking, Construction

  • High Accuracy：This digital angle finder allows a full range 0-360°to measure internal angle，external angle & Contra angle Measuring precision is ±0.5°, resolution is 0.05° .You can switch between degrees and minutes to Improve the measurement accuracy , meet your requirements for different accuracy..
  • Four Large Control Buttons: Pressing hold button on the digital angle finder to hold the measurement at any angle, it helps the users effectively record the angle values. In addition, including power on/off, read reverse angle, flip display, and clear readout..
  • Digital Sliding T-bevel: Turn the center knob to lock the angle, and use the protractor to copy any angle from 0 to 360 degrees, In addition, easily get 45 degree angle with a T bevel gauge..
  • LCD Display & Bubble Level: This highly protractor tool is equipped with a large LCD display for easy reading and integrates a steel locking knob for adjustment. There is a perfectly positioned bubble level on the end of the digital angle finder body to ensure the level before tracing any angles and making any cuts..
  • Worry Free Customer Service: We back each T bevel gauge with a free 1 year exchange service plus lifetime technology support, giving you complete peace of mind. Please don’t....
Check Stock

Digital Angle Finder Protractor 0-360 Degree T-Bevel Gauge & Protractor with Horizontal Vertical Bubble & Full LCD Display for Woodworking Metalworking Construction

  • High Accuracy：This digital angle finder allows a full range 0-360°to measure internal angle，external angle & Contra angle Measuring precision is ±0.5°, resolution is 0.05° .You can switch between degrees and minutes to Improve the measurement accuracy , meet your requirements for different accuracy..
  • Four Large Control Buttons: Pressing hold button on the digital angle finder to hold the measurement at any angle, it helps the users effectively record the angle values. In addition, including power on/off, read reverse angle, flip display, and clear readout..
  • Digital Sliding T-bevel: Turn the center knob to lock the angle, and use the protractor to copy any angle from 0 to 360 degrees, In addition, easily get 45 degree angle with a T bevel gauge..
  • LCD Display & Bubble Level: This highly protractor tool is equipped with a large LCD display for easy reading and integrates a steel locking knob for adjustment. There is a perfectly positioned bubble level on the end of the digital angle finder body to ensure the level before tracing any angles and making any cuts..
  • Worry Free Customer Service: We back each T bevel gauge with a free 1 year exchange service plus lifetime technology support, giving you complete peace of mind. Please don’t hesitat....
Check Stock

General Tools ANGLE-IZER T-Bevel Gauge & Protractor with Bubble #928 - Digital Angle Finder with Full LCD Display & 8\ Stainless Steel Blade Level

  • WOODWORKING RULER: This commercial-grade digital sliding T-bevel and digital protractor with an impact-resistant handle features a 360-degree stainless steel blade. The battery-powered gauge includes 1 CR2032 lithium-ion battery..
  • GENERAL TOOLS: We're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service. We encourage artisans and DIYers to work smarter, measure better, and repair more productively..
Check Stock

farway 3-in-1 Digital Angle Finder - Magnetic Angle Gauge, Electronic Level, and Mini Laser Level with LCD and Backlight - Ideal for Table Saw Miter Protractor and Woodworking Measurements

  • 【Versatile Laser Level】This multi-purpose laser level can be used for measuring angles, checking relative angles, and as a laser level with 2-beam technology. Emitting horizontal laser lines on both sides, it helps you mark with precision. it uses a class II laser limited to 1 mW continuous wave, which is safe for daily use.Making it perfect for home renovations, picture hanging, and DIY projects..
  • 【Highly Accurate】With a 360° (4*90°) measuring range and an accuracy of ±0.1° at 0° and 90°, and ±0.2° at other angles, this digital angle finder provides precise measurements. One-button switching angle and slope, and a resolution of 0.01 degrees make it perfect for design purposes. The true accuracy of the digital angle meter is plus or minus 0.2°..
  • 【Backlit LCD Display】 Equipped with a 1.44-inch LCD display with backlight and a responsive electronic tilt sensor, this digital angle cube provides accurate, immediate, and clear measurements. The display automatically inverts when the tool is upside down, and it turns off after 5 minutes of no operation to save battery..
  • 【Powerful Magnetic Base】 With a str....
Check Stock