Reviews Precision Die Cutting

5\ EXTENSION PNEUMATIC POWER POWERED EXTENDED LONG SHAFT AIR DIE GRINDER TOOL

  • ...but durable and solid body, comfortable to maneuver and perfect for one-handed grip. The ergonomically designed body is comfortable to hold for long work sessions..
  • High Free Speed - The Pneumatic straight die grinder operates at a maximum speed of 25,000 RPM continuous power with an air compressor, which allows for precision cutting, grinding, shaping, and sanding. Operating pressure: 90psi (6.3bar). Air consumption: 85.5l/min (3cfm). Note: Use sealant tape to avoid air leakage..
  • Rear Exhaust - A rear exhaust makes the lower sound level possible, while also ensuring that the exhaust isn't hitting the operator in the face. The air inlet filter could keep the die grinder from contamination. Note: Add oil regularly is needed for all air tools (lubricant included)..
  • Wide Application - The air compressor usually provides higher RPM than the electric motor, and they can maintain it indefinitely as long as your air compressor is large enough. This straight die grinder weighs less than one pound and can reach up to 25000RPM continuous power, suitable for welding repair, fabrication, cutting, polishing, grinding, and general machining for Automotive Pros..
Check Stock

STOBOK Tool Rounder DIY Making School Trimmer Cutter Puncher Accessories Picture Plastic Paper Supplies Card Punches Home Envelope for Corner Scrapbooking Film Pink Projects

  • Card Making Punch Board:You can round the angles of the photo to increase the beauty and make it safer..
  • Cutter For Film:Simply push the corner of your paper inside until its properly lodged against the guides and press the handle down..
  • Paper Corner Trimmer Machine:Practical design enough for ensuring precision cutting for a neat and clean appearance..
  • Envelope Punch Board:The round corner device with the upper die with the lower die cut out of stainless steel, cutting paper will not rough edges..
  • Corner Cutter:Wide applications. Suitable for cutting paper, photos, business cards, etc..
Check Stock

Crescent Wiss 12' Lightweight Aluminum Tinner Snips - WAL13S, multi, one size

  • Precision-ground cutting edges provide superior cutting quality & reduced cutting effort through optimized blade geometry.
  • Torque control handle rings provide superior comfort, fit, and are sized to accommodate hands with or without gloves.
  • Lightweight design heavy-duty die cast aluminum construction is durable & reduces user fatigue.
  • Control channel accommodates index finger for increased control and cutting stability.
  • Touch point ergonomics optimize hand & finger contact points in handles to maximize fit, control, and user ergonomics.
Check Stock

Anna Griffin - Empress Electronic Die Cutting Machine - Embossing Machine for Arts & Crafts - Card Making & Scrapbooking Supplies Tool - Perfect for Invitations, Birthday and Greeting Cards, 15x10x9"

  • ...ts who desire a professional finish to their work. It has a Rated Voltage of 110-120V~60Hz, and a Rated Current of 1.0A..
  • INNOVATIVE TECH WITH VERSATILE USAGE: Experience the power of modern crafting abilities with this Empress Electronic Machine. Enjoy the versatility and precision of this die cutting and embossing machine, which works with paper, cardstock, vellum, and more. This advanced machine features exquisite cut and embossing capabilities and includes a set of cutting plates and dies for maximum embossing potential. The included magnetic mat allows for precise, intricate cuts and impeccable embossing..
  • ALL-IN-ONE STARTER KIT - The Anna Griffin Empress die cutting and embossing machine comes with everything you need to start crafting right out of the box. This collection includes the Empress machine (13x6x6.1 inch), a power cord, 2 A plates (8.6x7 inch), a magnetic mat (8x6.4 inch), an embossing mat (8x6.4 inch), a metal shim (8.6x7 inch), an instruction manual, 4 cutting dies (Frame, Butterfly, Birthday, and Flourish), and a 3D embossing folder (Lattice Ornamental). With a 1-year limited warranty, you can now craft on-trend cards, scrapbooks, and invitation....
Check Stock

RYOBI ONE+ HP 18V Brushless Cordless Compact 1/4 in. Right Angle Die Grinder (Tool Only)

  • ... It also features an integral safety-lock throttle lever so it prevents accidental start-up. Note: Please remove the DUST PLUG before insert the air connector..
  • 【High Free Speed 】The Pneumatic straight die grinder operates at a maximum speed of 20,000 RPM continuous power with an air compressor, which allows for precision cutting, grinding, shaping, and sanding. Operating pressure: 90psi (6.3bar). Air consumption: 85.5l/min (3cfm). Note: Use sealant tape to avoid air leakage..
  • 【Ideal for One-Handed Grip 】The small, lightweight design provides easy operation, and greater access to tight spots. The air die grinder measures 6-5/16 inch long and weighs 1lbs, comfortable for maneuvering and perfect for one-handed grip. With the ergonomically designed body, it is easy to hold for long work sessions..
  • 【Rear Exhaust】This die grinder features a rear exhaust to direct air away from work, making the lower sound level possible, while also ensuring that the exhaust isn't hitting the operator in the face. The air inlet filter could keep the die grinder from contamination. Note: Add oil regularly is needed for all air tools (lubricant included)..
  • 【Wide Application】 The air compressor usually provides higher RPM than the electric motor, and they can main....
Check Stock

Cuttlebug Cutting Plate B 6'X13'-

  • Can be used on an embossing cutting machine, the transparent durable cutting pad makes it easy to place materials for precise die-cutting..
  • Ensure both sides of the cutting pads are used, to help extend the life of your pads!.
  • The see-through PC plastic allows easy placement of materials for a precise die cut..
  • Allows complex graphics and complex patterns for die-cutting, suitable for small die-cutting machine, they are not suitable for large injection machine..
  • The clear acrylic die cutting plate is made of quality acrylic board, which is very suitable for your cutting and diy use, and it is very practical..
Check Stock

TECHTONGDA CG1-100C Double Torch Track Burner Portable Handle Gas Cutting Machine 110V

  • 1. Easy to operate, smooth operation. The product moves slowly on the rails and uses thyristors to control the speed, making handling very simple due to control buttons..
  • 2. Reliable quality and durable. Body-precision high-strength aluminum alloy die-casting, the drive movement commutator using silver-copper alloy, copper power line..
  • 3. High cutting precision, the torch angle can be adjusted freely. Straight cut, can cut I, Y, V slot..
  • 4. Safe enough, scientific and reasonable control logic, clear operation buttons, while ensuring efficiency, provide sufficient security..
  • 5. Wild Application, this Flame Cutting Machine is widely applied in shipbuilding, oil production, metallurgy, metal structure and many other industrial fields..
Check Stock

Sizzix Chrome Precision Base Plate for Intricate Thinlits, Multicolor

  • COMPATIBILITY – Compatible with the Big Shot machine only.
  • BASE PLATE – The Chrome Precision Base Plate allows for precise die cutting of your most intricate wafer-thin dies.
  • CUT A MULTITUDE OF MATERIALS – Including burlap craft plastic craft metal fabric aluminium canvas lightweight suede and thin cork.
  • PRODUCT DIMENSIONS - 10" x 6 1/8" x 1/8".
  • Note Do NOT use the Chrome Precision Base Plate with steel-rule dies as damage may occur.
Check Stock

We-buys Cutting Dies C Plate Replacement Adapter Mat Clear 5.9'×7.6'

  • Can be used on an embossing cutting machine, the transparent durable cutting pad makes it easy to place materials for precise die-cutting.Plate thickness is 3mm.
  • Ensure both sides of the cutting pads are used, to help extend the life of your pads!.
  • The see-through PC plastic allows easy placement of materials for a precise die cut..
  • Allows complex graphics and complex patterns for die-cutting, suitable for small die-cutting machine, they are not suitable for large injection machine..
  • The clear acrylic die cutting plate is made of quality acrylic board, which is very suitable for your cutting and diy use, and it is very practical..
Check Stock

Circle Rectangle Frame Metal Die Cuts,Flower Frame Square Net Card Cutting Dies Cut Stencils DIY Scrapbooking Album Decorative Embossing Paper Dies Festival Card Making

  • ...ng Dies Stencil Template for DIY Scrapbook Album Paper Card Craft Decoration dies on the cowboy dies..
  • 【Material】 High Quality Thin Metal Cutting Dies made of 100% Carbon Steel . Highly detailed and delicate.embossing press debossing dies cutting tools and embossing dies for graduation craftsman homemade impress precision cutting dies memory dies scrapbooking border dies occasion greeting card making.Embossing Folders and Stamp Also match in our Eswala store..
  • 【Features】Circle Rectangle Shape, Easy to Use, Durable, Paper Embossing Tool Perfect DIY tool for greeting card, invitation, scrapbook, photo album, etc. Extensive applications - cutting shapes punch cutting dies on for a variety of materials including paper, cardstock, chipboard, specialty paper and more!.
Check Stock