Reviews Praseodymium Alloy Heat Treatment

NVMe Heatsinks for M.2 2280mm SSD Double-Sided Cooling Design（red）

  • 【Designed for M.2 SSD】-The heat sink is specially designed for M.2 2280mm SSD, which is very suitable for desktop computers/Playstation 5, etc..
  • 【Double-sided cooling】- Aluminum alloy-Groove design, greatly increase the heat dissipation area, with 10°C - 30°C cooling effect (Varies....
  • 【Easy to Install and Operate】 - With double-sided clip design, 6 adjustable height screws, suitable for M.2 SSD of various heights, stable....
  • 【Unique Nano Thermal Pad】- Advancing Gene thermal pad is made from Nano Silicon Grease Material, with good thermal conductivity ability. Soft....
  • 【Fine Workmanship】- Main body material: Aluminum alloy, silver plating (Helps eliminate static electricity), anodic oxidation surface treatment.....
Check Stock

TARAZON 21\ 19\ Complete Wheel Set Orange Hub Rims for SX EXC SX-F EXC-F 125 250 350 450 500 530 2003-2021

  • Package includes : 21"x1.60 front wheel with 36 spokes , 19"x2.15" rear wheel with 36 spokes, complete wheels sets. Wheel hubs,spokes,axle spacers,bearings,seals all including, all pre-insatalled. Net weight : 24.0 lbs,Safety Standard Certification:DOT Certification.
  • Shipping : front and rear wheels sets will pre-assembly when we get order within 24 hours, each wheel will adjust and test by our assembly tools, each wheel should passed the deflection and vibration test.HUBS, RIMS, CAN CUSTOM COLORS, SHOULD PAY FOR 30 DOLLARS CUSTOM FEES..
  • HUBS Specification : Billet aircraft aluminum alloy 6061 material , T6 standard heated treatment, aircraft lighter material and material heated treatment ensure the material have highest density and highest strength. High perfermance than cheap casting hubs.all hubs CNC milled with 5 axles CNC machines..
  • RIMS Specification : Rims made from 7075 alloy aluminum materail, three-stage heat treatment process for the highest available strength,this is true aircraft quality material, each rims passed tensile strength test,compressive strength test and hardness test.
  • SPOKES Specification: Mn 65 spokes,all the spokes passed tension test, better elasticity than stainless steel,since stainless steel easy broken and crack..
Check Stock

Aluminum Enclosure Case, DIY Project Boxes for Electronic, DIY Aluminum Electronic Enclosure Box, 50 x 178 x 300mm, Good Heat Dissipation

  • ALUMINUM ALLOY PROJECTOR BOX - Made of high quality aluminum alloy material, durable and long service life..
  • DIY ENCLOSURE CASE - Adopt split type design, you can assemble and design the box you want by yourself..
  • PREMIUM QUALITY - Surface sandblasting and brushed treatment, wear resistant and beautiful, comfortable hand feeling..
  • HIGH PERFORMANCE - Good heat dissipation and excellent electromagnetic shielding performance..
  • WIDE RANGE OF APPLICATION - Used for heat-dissipating aluminum casing of electronic products, printed circuit board wiring aluminum box, DIY, etc..
Check Stock

21X3.5 52 Fat Spoke Tubeless Wheel for Harley Touring Bagger fits 2000-2007 (1\ Bearing) w/White Wall Tire & Rotors (w/bolts)

  • Package includes : 21"x1.60 front wheel with 36 spokes , 19"x2.15" rear wheel with 36 spokes, complete wheels sets. Wheel hubs,spokes,axle spacers,bearings,seals all including, all pre-insatalled. Net weight : 24.0 lbs,Safety Standard Certification:DOT Certification.
  • Shipping : front and rear wheels sets will pre-assembly when we get order within 24 hours, each wheel will adjust and test by our assembly tools, each wheel should passed the deflection and vibration test.HUBS, RIMS, CAN CUSTOM COLORS, SHOULD PAY FOR 30 DOLLARS CUSTOM FEES..
  • HUBS Specification : Billet aircraft aluminum alloy 6061 material , T6 standard heated treatment, aircraft lighter material and material heated treatment ensure the material have highest density and highest strength. High perfermance than cheap casting hubs.all hubs CNC milled with 5 axles CNC machines..
  • RIMS Specification : Rims made from 7075 alloy aluminum materail, three-stage heat treatment process for the highest available strength,this is true aircraft quality material, each rims passed tensile strength test,compressive strength test and hardness test.
  • SPOKES Specification: Mn 65 spokes,all the spokes passed tension test, better elasticity than stainless steel,since stainless steel easy broken and crack..
Check Stock

Rannb End Mill Cutter 1/16\ Cutting Dia 1/4\ Shank Dia 4 Flutes End Mill Drill Bit - 5pcs

  • ⭐【Material】The end mills are made of High Speed Steel,high hardness,good wear resistance and durability..
  • ⭐【Pack of 5pcs】Sold in pack of 5pcs of end mill cutters..
  • ⭐【Good Design】 Large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • ⭐【Applicable Material】Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium.And Circuit boards,Metal,Majority of plastics, Wood, Fibre glass, Carbon and environmental board..
  • ⭐【Heat Treatment Process】The High Hardness Steel go through the heat treatment process so the end mill is more durable. Reduce changing times and improve the production efficiency..
Check Stock

AVAN-300W Three-Phase alternator Permanent Magnet Generator, Rare earth NdFeB Electric 3 Phase High Speed Permanent Magnet Generator (With Rectifier 48V)

  • [Three-phase alternator]: rated power: 300w.
  • permanent magnet material: rare earth NdFeB iron boron.
  • Generator diameter: about 150mm / 5.9 inches.
  • [Rare earth NdFeB iron boron material]: The permanent magnet material is made of rare earth NdFeB iron boron material, which is called the king of magnets. It is wound with high-grade pure copper wire, so this permanent magnet generator has higher efficiency, more stable power and more Safe and reliable..
  • [Good heat dissipation performance]: The three-phase AC generator adopts special stator and rotor design, and has low starting resistance torques and good heat dissipation performance, stable operation and high safety factor..
  • [Easy operation]: The low-speed rare earth permanent magnet generator is very simple to operate, easy to maintain, gearless, can be directly driven, and adopts advanced surface spraying technology, energy saving, high efficiency, safe and reliable, and bright color..
  • [Die-cast aluminum alloy shell]: The three-phase AC permanent magnet generator adopts a die-cast aluminum alloy shell with anti-corrosion treatment, acid, alkali and salt resistance, corrosion resistan....
Check Stock

PS5 NVMe Heatsink,M.2 2280 Cooler for The Playstation 5 Internal (Black)

  • Specially designed for PlayStation 5 Upgrade M.2 NVME Disk heatsink.
  • Aluminum alloy: high performance a solid aluminum heatsink..
  • 【High-Quality CNC】- Aluminum alloy, silver plating , anodic oxidation surface treatment.
  • Greatly increase the heat dissipation area of M.2 storage disk, with 10°C - 30°C cooling effect..
  • Comes with thermal pad and installation guide..
  • Classic and practical cooling line Offers a steady and effective cooling solution for the PS5..
Check Stock

Jetech 3/4' Dr 46mm Impact Socket, Standard Impact Socket with 6-Point Design, Chrome Molybdenum Alloy Steel, Metric

  • Cr-Mo ALLOY STEEL - Cr-Mo impact socket features with added strength, higher working temperatures and corrosion resistance. It’s much stronger to stand greater impact force than chrome vanadium ones..
  • COLD FORGING & HEAT TREATMENT - Cold forging and heat treatment greatly improve the performance of the socket with enhanced hardness, increased wear-resistance and lifespan..
  • 6-POINT SOCKET OPENING - 6-point design provides an exact and snug fit, allowing it to apply more torque on the fasteners and avoid slipping off..
  • RADIUS CORNER DESIGN - The lifespan of both the fastener and socket will be greatly prolonged with the torque distributed to the inwall..
  • BLACK PHOSPHATING - A fine and dense coating brings more corrosion and wear resistance for longtime use..
Check Stock

Jetech 3/4-Inch Drive 35mm Deep Impact Socket with 6-Point Design, Heat-Treated Chrome Molybdenum Alloy Steel, Metric

  • Cr-Mo ALLOY STEEL - Cr-Mo impact socket features with added strength, higher working temperatures and corrosion resistance. It’s much stronger to stand greater impact force than chrome vanadium ones..
  • COLD FORGING & HEAT TREATMENT - Cold forging and heat treatment greatly improve the performance of the socket with enhanced hardness, increased wear-resistance and lifespan..
  • EXTRA DEPTH - Provide more space to accommodate longer bolts and wider applications to facilitate your work..
  • RADIUS CORNER DESIGN - The lifespan of both the fastener and socket will be greatly prolonged with the force distributed to the inwall..
  • BLACK PHOSPHATING - A fine and dense coating brings more corrosion and wear resistance for longtime use..
Check Stock

Jetech 3/4-Inch Drive 46mm Deep Impact Socket with 6-Point Design, Heat-Treated Chrome Molybdenum Alloy Steel, Metric

  • Cr-Mo ALLOY STEEL - Cr-Mo impact socket features with added strength, higher working temperatures and corrosion resistance. It’s much stronger to stand greater impact force than chrome vanadium ones..
  • COLD FORGING & HEAT TREATMENT - Cold forging and heat treatment greatly improve the performance of the socket with enhanced hardness, increased wear-resistance and lifespan..
  • EXTRA DEPTH - Provide more space to accommodate longer bolts and wider applications to facilitate your work..
  • RADIUS CORNER DESIGN - The lifespan of both the fastener and socket will be greatly prolonged with the force distributed to the inwall..
  • BLACK PHOSPHATING - A fine and dense coating brings more corrosion and wear resistance for longtime use..
Check Stock