Reviews Power Woofer - BestBuyersPro.com

HERTZ Mille MLK 165.3 Legend Car Audio Speakers System

Power Handling: 300 Watts Peak | Power Handling: 150 Watts RMS.
Impedance: 4 Ohms | Frequency Reponse Hz: 40 | Sensitivity dB SPL: 91.
Voice coil Ø mm (in.): Woofer 36 (1.4) Tweeter 28 (1.1) | Woofer size mm (in.): 165 (6.5).
Tweeter magnet: Neodymium | Woofer cone: Pressed-pulp cone with cotton fibres.
Tweeter dome: Tetolon | Crossover type: 2 Way Passive Crossover | Crossover cut off: 3.5 kHz - 12 dB Oct.

...luminum dome midrange drivers and tweeters for a smoother, more open response and minimal distortion at high volume levels. The angled tweeter design means the high frequencies are aimed toward your ears, so you'll enjoy excellent stereo imaging even if the speakers are mounted way down low in your doors..
Plus One+ woofer technology: JBL's glass fiber woofer will hold its shape when the power's cranked up, so you still get punchy and defined bass. Glass fiber weighs less than traditional materials, so you don't need a ton of power to drive this woofer either. JBL's Plus One+ woofer technology extends the cone right up to the edge of the basket, giving you lots of surface area — and a bigger cone means more bass to complement the superior high-frequency response..
Power handling perfect for any system: These 3-ohm speakers boast ultra-high sensitivity so that you can power them with a factory radio or aftermarket stereo, but you'll get your best results feeding them plenty of power from an outboard amp. Either way, these speakers' low impedance safely takes advantage of every watt of power available for exceptional performance..
Grilles included and 1 Year Manufacturer Warranty.

Features: Power Handling: 300W Max | 100W RMS. Impedance: 4-Ohm, Frequency response: 40 ÷ 23kHz, Sensitivity: 93 dB, Woofer size: 6″ x 9″, Tweeter size: 1.58″, Supertweeter size: 0.8″, Woofer Voice Coil Ø: 1.2″, Tweeter voice coil Ø: 1.1″, Woofer magnet: High density flux ferrite, Tweeter magnet: Neodymium, Woofer cone: Semi Pressed Paper-Mica, Tweeter dome: PEI, and Supertweeter dome: PEI..

[Shake up the Sound] A powerful 8” dual-woofer subwoofer that delivers stunning bass to home theaters and media/gaming rooms.
[Up to 300W of Power] Handles up to 300W of power for bass that is powerful, smooth, and extremely accurate.
[Dual Woofer Design] Unique dual woofer design includes an active and passive woofer to maximize sound performance.
[App-controlled DSP] App-controlled Digital Sound Processing enhances bass and ensures extremely low distortion.
[Efficient Sonic Purity] Consumes less than 0.5 Watts in standby while gold-plated inputs ensure the highest quality sound transfer.

700 WATT POWER: This high powered audio projection woofer system has a maximum power output of 700-watt peak power / 200 watt RMS so you can play your favorite tracks as loud as you want and with style.
35Hz - 4kHz FREQUENCY RESPONSE: This high-performance car woofer speaker has a frequency response of 35Hz - 4kHz that will complete your current car woofer enclosure system for full-range stereo sound reproduction.
2” KAPTON VOICE COIL: This car speaker has 2” high-temperature Kapton voice coil, 90 dB SPL and 8ohm impedance rating that compensates the undersized wire found in most cars. Ultimately reduces distortion so you can enjoy a crisp & clear sound.
12 INCH PAPER CONE: Pyle Pro follows the standard size for most car stereo systems & created this 12" woofer strong black paper cone driver perfect for new speaker construction or replacing worn or blown speakers in your favorite loudspeaker cabinet.
60 OZ MAGNET STRUCTURE: This woofer speaker has a 60 oz magnet structure. The heavy-duty housing along w/ the stamped plastic basket & cloth edge suspension provides a strong foundation. It is also super easy to install to your vehicle's sound system.

The tweeters are mounted to the grilles, rather than to a pole piece, thus there is no chance of water leaking through the woofer cone..
There are red, green, and blue LED's in the back of each tweeter casing to create a glow on the woofer cones. The LED's are controlled using the included RF remote, choose between 21 different static colors, or 21 different dynamic modes..
Water-resistant rubber cushion adopted to prevent water intrusion of back side of the woofer..
A 12 volt power supply is needed to turn the LED's on and a 3-amp fuse should be wired in-line (fuse not included). One of the speakers has an LED control module attached with an RF remote control receiver, to which the LED power and ground wires are connected. The included Link Cable B is routed to the other speaker to control its LED's..
Water-resistant PP Cone (IPX5) , UV resistant woofer grille and cone.

Focal ISS-200 8" 2-Way Component Speakers System | Component speaker system includes two 8" woofers and 2 tweeters | Power Handling: Max: 160 Watts |....
Dynamics and neutrality | Woofer: 8" (200mm) | Polyglass woofer with butyl rubber surround | Partial horn loading tweeter | Built-in crossovers |....
Compact tweeter size | 4-ohm impedance | Woofer Grilles NOT Included | Sensitivity: 91.4 dB | Frequency Response: 40Hz - 20kHz | Shallow mounting....
What's in The Box?: Two 8" Woofers | Two inverted dome tweeters (with 5" length of speaker wire attached) | 2 Surface mount tweeter housings....
2 Foam woofer gaskets | 8 Speed clips | Four 7/8" Flathead screws | Eight 1" Self-tapping screws | Owner's manual (English/ French) | Focal window....

8" Single 4 ohm shallow mount subwoofer | power handling: peak: 600 watts | RMS: 150 watts | Recommended power range: 50 - 150 watts RMS.
Carbon-glass fiber composite Cone woofer | Butyl rubber surround.
Super linear spider for maximum control over the woofer's linear motion | dual Magnet drive.
Removable gasket | heat transfer system designed to provide ventilation to keep the woofer cool.
Aluminum-cast Basket for long-lasting reliability | frequency response: 40 - 500 Hz | Sensitivity: 78 dB.

Power Handling: Peak: 400 watts per set / RMS: 250 watts per set.
Natural fiber woofer and midwoofer cone: Precision computer designed cone.
Natural UV resistant Butyl rubber inverted surround: Designed to resist power compression.
Integrated sealer gasket. Woofer Mounting Depth-2.65 inch.

Boasts 300 watts of peak power and 150 watts of RMS power.
Features 12-inch woofer with 1-inch horn loaded tweeter.
5-way binding posts and 0.25-inch input jack make connection to an amplifier simple.
Dimensions (L x W x H): 12.75 x 15.18 x 26.06 inches.
High excursions ported woofer configurations.
Metal grille protects drivers from damage.
Rugged corner braces protect corners and interlock when units are stacked.
Durable MDF enclosure is covered with aviation grade carpet.