Reviews Power Line Fitting

KOOTANS 15 Ft 3 in 1 Wrap Set, ABS Electrical and Rubber Air Line Hose Assemblies 7 Way Electrical Cable with Handle Grip for Semi Truck Trailer Tractor

  • THE 3 IN 1 AIR-POWER LINE CONTAINS: Service air line rate to -65F (-55℃), ABS power line (green) rated to -85F (-65℃) Emergency air line rated to -65F (-55℃). Fully enclosed in spiral wrap to prevent lines from becoming tangled. And it is more wear-resistant..
  • SIZE: 15 feet length, 1/2" brass fitting joint. Heavy duty 15 feet trailer air line & ABS wrap cord assembly..
  • SPRING JOINT: more durable, joint is not easy to damage. BRASS CONNECTOR: good anti-corrosive and anti-rust properties. Red and Blue handles for easy identification and quick connection..
  • ELECTRIC CABLE USE HIGH QUALITY COPPER, good heat and electricity conduction, safe and efficient..
  • REPLACES: Tectran 13S15401, Tectran 169157, Tremec Sloan 455180DSET, Tremec Sloan️ 451098, Philips 11-8115, Phillips️ 30-2171, etc..
Check Stock

Turbo Bowling Grips Bowler's Tape 40Piece with Case- 1\ White

  • Performance Fitting, Protection and Release Tape The days of using tape strictly for adjusting fit are a thing of the past.
  • Get the Power to Excel with the industries most advanced tape technology.
  • Slowest Release, Extra Thick Profile, Single Stretch Cotton, Fitting: 5, Protection: 5, Release: 1 Our new line of performance tapes provide you with superior protection against blisters, cuts and abrasions, and are available in five distinct styles.
Check Stock

NEW WILWOOD GO KART BRAKE SET WITH CALIPER PADS MASTER CYLINDER & LINE KIT FOR 1/8 ROTORS GREAT FOR KARTING JR DRAGSTER ETC SOUTHWEST SPEED

  • Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560)..
  • Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560). Kit Includes: Wilwood Go-Kart Caliper for .125" Rotors Fits 0.125" Thick rotors Features Two 1.00" Pistons Weighs only 1.2 lbs. Comes with high friction brake pads..
  • Wilwood Go-Kart Master Cylinder with a 1/2" Bore 1/2" Bore Weighs only .55 lbs. This super lightweight aluminum master cylinder designed specifically for kart & jr. dragster racing applications incorporates an adjustable lever ratio with a remote mount clear fluid reservoir for easy monitoring The assembly comes ready to install and includes billet bracket, lock-wired drilled hardware, & fluid line fitting ..
  • 5 Feet of -3 Nylon Brake Line 3/16" Nylon tubing 5' Should equip most karts with some left-over..
  • 90 Degree Fitting for Caliper Depending on how everything is mounted, the line might run to the caliper at a bad angle for the straight fitting. This 90 degree fitting instal....
Check Stock

Habitech 3-Pack 1/2 Inch Drip Irrigation Tubing to Faucet/Garden Hose Adapter - Reusable Connector Fittings for Most Rain Bird, Orbit, Dig, Toro 1/2 or 5/8 Tubing x 3/4" FHT

  • EASY TO USE. Easily connect 1/2″ drip irrigation tubing to any standard 3/4″ faucet, hose bibb or garden hose. Just insert and twist, no special tools needed. Each swivel irrigation fitting includes a pre-installed rubber washer to guarantee a water-tight seal..
  • STRESS-FREE FIT. Our faucet connection adapter works with the widest range of half inch tubing, from .520 to .620″ Inside Diamater, .620 to .710” Outside Diameter and .045 to .055 Wall Thickness. PLEASE MAKE SURE YOUR TUBING SPECIFICATIONS FALL WITHIN THESE RANGES FOR THE PROPER FIT. Compatible with many models of Rainbird, Orbit, Dig, Hunter and Toro tubing as well as generic 1/2″ blank drip irrigation tube or drip line. Large fitting ID means less flow restriction..
  • ZERO LEAKS. Power-Loc fittings don’t leak. Barb design ensures tubing will not slip out or blow off at high pressure and temperature. No slippage or leaking, even under high pressure..
  • REUSABLE & LONG LASTING. Unlike other types of fittings, these parts are reusable and may be removed and reinstalled for a long, versatile life. Simply loosen nut to remove tubing. Durable construction provides years of reliable use..
  • PATENTED LOCKING TECHNOLOGY. Power-Loc fittings are quickly revolutionizing i....
Check Stock

12V/24V Auto 4 Port Underdash Compact Heater Kit 12X Copper Tube+Speed Switch Set For Truck Universal Trucks Minivans Excavators Harvesters Tricycles. (12 V)

  • 1.Fitting required - 5/8'' (16mm) inner diameter water hose.
  • 2.Applicable models: trucks, minivans, excavators, harvesters, tricycles and so on..
  • 3.Comes with mounting brackets and control switch..
  • 4.Very easy to install , only need to hook this heater up to water tank and supply power , then works..
  • 5.INSTRUCTIONS: The red line is connected with a power supply's positive pole and motor's positive pole. The blue one is connected with the motor's negative pole. The black line is connected with a power supply's negative pole..
Check Stock

Speedway Motors Universal 1964-72 GM Power Steering Hose Kits

  • Power steering hose assemblies are an inexpensive alternative to the more costly stainless steel braided hose kits.
  • Return hose will normally need to be cut to length.
  • High Pressure Line: 24" long, Inverted flare fittings, one 5/8"-18 and one 11/16"-18.
  • Return Hose: 25" long, 5/8"-18 inverted flare fitting.
  • 1964-72 GM Power Steering Hose Kits help complete your project.
Check Stock

WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided

  • ...i. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
  • 4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect male, 1pc 6AN to 5/16" hose adapter fitting..
  • 5.Professional installation recommended: PTFE hose relatively hard, it can't be bend and folding in half. Nylon and stainless steel braid for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
Check Stock

Auto 4 Port Underdash Compact Heater Kit 13X Copper Tube+Speed Switch Set for Truck Universal Trucks Minivans Excavators Harvesters Tricycles

  • ♥【Specification】①Optional Voltage: 12V.②Power supply: 12V / 8A.③Material: Copper, Iron.④Weight: about 3KG. ⑤Size: 23 x 21 x 10cm/9.3" x 8.5" x 3.9". ⑥Fitting required - 5/8'' (16mm) inner diameter water hose..
  • ♥【Feature】①Comes with mounting brackets and control switch.②Very easy to install , only need to hook this heater up to water tank and supply power , then works..
  • ♥【Package】Included: ①1pcs x heater. ②4pcs x Black tubes. ③2pcs x Tee. ④2pcs x mounting brackets.⑤1pcs x switch.⑥2pcs x straight fittings. ⑦8pcs x 16-25cm hose clamps..
  • ♥【Instructions】①The red line is connected with a power supply's positive pole and motor's positive pole.②The blue one is connected with the motor's negative pole.③The black line is connected with a power supply's negative pole..
  • ♥【Using】①Applicable models: trucks, minivans, excavators, harvesters, tricycles and so on..
Check Stock

GlowShift 3/16” MAP Line Boost T-Fitting Adapter Compatible with Ford F-Series 1992-1997 & F-250 F-350 Super Duty 7.3L 6.0L Power Stroke 1999-2007 - 1/8-27 NPT Sensor Port - Includes Hose Clamps

  • GlowShift Boost MAP Line T-Fitting Adapter Allows Users to Install a Boost Hose or Sensor to the MAP Line for Accurate Readings Directly from the....
  • Compatible with 1992-1997 Ford F-Series 7.3L Power Stroke, 1999-2002 Ford Super Duty 7.3L Power Stroke, 2003-2007 Ford Super Duty 6.0L Power Stroke,....
  • Features a 1/8-27 NPT Female Thread Port, (2) 3/16" Barbed Fittings & (2) Hose Clamps.
  • Includes Step-By-Step Installation Instructions.
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

Oatey 43791 PVC Saddle Tee Kit, 4-Inch x 2-Inch,White

  • The product is highly durable and easy to use.
  • For tapping into a 3-Inch or 4-Inch Sch. 40 DWV line.
  • Saddle is solvent welded to the existing line and secured with metal V-bolts, washers and nuts provided in the kit.
  • The tee accepts the incoming line inside the socket, or joins with a Sch. 40 DWV fitting.
Check Stock