Reviews Power Gain Omnilifes

Taidacent AD620 High Accuracy Low Cost Low Power Instrumentation Amplifier Voltage Amplifier Module Differential Amplifier Single-Ended/Differential Small Signal

  • Power supply: 5V-24V can be, but depends on how much the baby with the voltage output (if the customer requires output 5V voltage, then the AD62X series of chips is about ± 3.8V power supply, the regulator chip itself has a pressure difference, so it is recommended that the voltage is higher than 12V single Power supply is better).
  • Bandwidth: AD620/623 is lower than 50KHz at high gain and greater than 1MHz at low gain Input signal type: single-ended signal or differential signal.
  • The maximum magnification: more than 2000 times (actual measurement), due to the gain assembly resulting in greater fluctuations in the waveform band, it is recommended to use high-gain multi-stage amplification.
  • Saturation output amplitude: AC peak 10Vpp (±5Vpp).
  • This module can be enlarged 1000 times, the circuit layout is regular, MINI, design layout and wiring are reasonable.
Check Stock

Drop Objective 2 Headphone Amp: Desktop Edition (Standard), Black, Standard Gain (2.5 Low, 6.5 High)

  • BASELINE PERFECT — The Objective 2 Desktop Edition features updates based on feedback from the community.
  • it’s an ideal baseline reference amplifier, capable of powering everything from IEMs to HD 800s with linear ease.
  • COMMUNITY-DRIVEN DESIGN — The O2 was made to be an entry-level benchmark performance amp, something the audiophile world had never seen before.
  • while most were satisfied with purist input, output, and power arrangements, the Drop community wanted more options.
  • RECONFIGURED FOR THE PURISTS — Drop community members asked for a quarter-inch headphone output, RCA inputs, and a rear-mounted power jack, and we included all three requests in the Desktop Edition.
  • STANDARD GAIN VS. MEDIUM GAIN — Get the medium gain version if you plan to primarily use this amp with IEMs. If you don't plan to use IEMs, if your headphone has a 300-ohm or higher impedance, or if your source is weak (less than 2V output), opt for the standard gain version.
Check Stock

LinkFlex AD2 XLR /6.35mm-3.5mm Microphone Preamp Amplifier Audio Adapter Universal Replacement for Camera Smartphone Guitar Interface

  • XLR/6.35mm Audio Audio Adapter: Simply plug a 6.35mm audio connector (a guitar or other instrument) or a microphone XLR connector into the LINKFLEX AD2, then connect it to your device with a 3.5mm output cable..
  • Universal for camera and smartphone with 3.5mm output jack..
  • Support 48V Phantom Power Output: It can provide power for the microphone that supports 48V phantom power input to avoid the interruption of recording due to low power..
  • Audio Preamp and Gain Control: The provided gain-control knob is easy to adjust the gain of the audio input. Processed sound can be monitored through a 3.5mm headphone output..
  • Mic/Phone Two Way Audio Monitor: Real-time monitor.
  • Playback monitor. Blet-clamp and fastener tape design at the bottom..
Check Stock

FiiO AM3 Balanced Output Headphone Amplifier Module for X7 Portable High-Resolution Audio Player, Titanium

  • ... minimal distortion for extremely pure audio reproduction..
  • [Desktop-class THX 788+ headphone amp]: Desktop-class amplification also plays an important role in the M17 audio player. FiiO and THX jointly developed the exclusive THX AAA-788+, an upgraded version of the original op-amp. Compared to the original, output power is increased by 225% up to 3000mW per channel with a lower output impedance – allowing it more effortlessly power all kinds of headphones..
  • [Desktop-level connectivity]: The M17 mp3 player features : 3.5mm output: headphone out/line out.
  • 4.4mm output: balanced headphone out/balanced line out.
  • RCA coaxial port: coaxial input and output.
  • USB 3.0 port: supports USB Host and Device modes, can be used for high-speed data transfers and fast charging.
  • USB 2.0 port: supports USB Host mode, allowing external DACs or hard drive storage to be connected..
  • [Desktop-tier heat dissipation]: With exceptional audio quality comes with large power consumption, so effective heat dissipation was a large focus when designing the M17 music player. Not only are "H" type heat dissipation and VC liquid cooling technologies adopted, the bluetooth mp3 player M17's 151g unibody aluminum alloy fra....
Check Stock

Jet 90015S Stage 2 Module

  • Provides performance gain of up to 25 horse power.
  • Improves throttle response, acceleration and low end torque.
Check Stock

Jet 90015 Stage 1 Module

  • Provides performance gain of up to 25 horse power.
  • Improves throttle response, acceleration and low end torque.
Check Stock

SMSL HO200 Hi-Res Balanced Headphone Amplifier Low Noise 4xPLFC RCA/XLR Input 6.35mm 4.4mm XLR Balanced Output HiFi Preamp Headphone Amplifiers with High Mid Low Gain Control for AO200

  • √ High Power Output: SMSL HO200 not only can be used as a headphone amplifier, but also can be used as a Hi-End Pre Amplifier. At the output power of 16 ohms power up to 6W, 32 ohms at 3w!.
  • √ Low Noise Headphone Amplifier: 4 x PLFC ultra-low distortion precision linear feedback circuits are used. Distortion as low as 0.00006%, signal-to-noise ratio up to 140dB!.
  • √ Balanced / Single-ended Output: HO200 provides 4 core XLR balanced, 4.4 balanced and 6.35 single-ended headphone output interface respectively, to meet the needs of different headphones!.
  • √ Three-step Gain Switching Switch: Using the classic toggle switch rotary button, there are high, medium and low three-step gain switching switch. More convenient to switch gain control, where the low gain is optimized for IEM only!.
  • √ Streamlined Design: Anodized technology, external aluminum CNC machining shell, fine workmanship, ultra-compact design, simply the top of the desktop headphone system!.
Check Stock

LYR Guitar effect pedal OVERDRIVE pedal electric guitar King Of Pedal Professional effect pedal True bypass, purple, 120 * 93 * 65 mm (V4)

  • This pedal is warm enough to keep your high-quality guitar and amplifier timbre..
  • There are three modes: 1) Od mode): This is the standard King of tone. 2) Clean mode: this mode has less driving force and can be used for cleaning, enhancement or clearer and louder sound. 3) Distortation mode: this mode has more driving force than the standard od mode - a little hard distortion. Sound is more compressed, but retains its characteristics..
  • This device is the highest version, that is, BOTH HIGH GAIN SIDE. The high gain here is only about 15% more than that of normal gain. It is not suitable for playing heavy metal!!!!.
  • Power supply: the device is designed to use DC ~ 9V power supply, or battery power supply（ You can access it by removing the four screws at the bottom.).
  • Solid quality: The aluminum body makes this overspeed pedal safe for transportation..
Check Stock

JOYO Tauren R-01 R Series High Gain Overdrive Pedal Clean Boost to Distortion for Electric Guitar Effect (R-01)

  • ...styles, displaying a perfect fusion. R series will make your soul happy whether you are jamming in the bedroom, studio or on the stage..
  • Before you test the pedal or before playing, make sure the guitar is fully connected with the pedal. In order to make JOYO pedals work properly, avoiding unexpected noise caused by power supply, we recommend that you purchase a JOYO original power adapter, or choose other reliable brands. More importantly, you need to make sure it meets the working current requirement of the pedal..
  • R series effect pedals deliver way more comprehensive tones and functions compared with other pedals. Pedal with bypass provide transparent tone,minimize the tone loss to keep the tone quality. In addition to the existing JF/Ironman/R series of effect pedals, we will improve and upgrade our product, based on the extensive and constructive feedback given by our supportive customers..
  • Directly sold by manufacturer of JOYO Technology Co.,LTD it's over decade of brand reputation, We will provide best ever excellent customer service with worry-free after-sale service, much better than any other distributors..
Check Stock

KHDK Dark Blood KHDK's Evil Pedal, Dark Blood, Delivers Evil, Merciless Amp Distortion

  • Gain controls the gain of the circuit. A lower setting creates a pick-sensitive tone with excellent dynamics, while a higher setting brings a massively overdriven tone. Doom controls the pre-distortion equalization which determines the amount of low-end grunt present in your tone. This control moves from a tight bass to a long sustain, giving you a liquid, solo-ready tone. Volume sets the output volume of the pedal. Treble control is a passive, natural sounding low-pass filter. It cuts.
  • The tone of the KHDK Dark Blood distortion effects pedal is tube-like and mid-heavy with added high gain.
  • Its unique power is its distinctly amp-like sound.
  • Richly articulate and deep, Dark Blood can provide the main tone into your clean amp and is ideal as a fly rig and a backup to an amp or modeling rig.
  • With its high gain and aggressive, uncompromising dynamics, this is the ultimate pedal for gain-freaks, designed both for palm-muting riffs and searing, high-gain solos.
Check Stock