Reviews Power Board

1pcs 1-Bit AC 220V Optocoupler Isolation Module

  • Output TTL level can be detected with the microcontroller. The power supply can be 3-5V.
  • the PLC input terminal of the PLC COM power supply 24V input termination of the board signal output OUT, optocoupler board GND power negative.
  • When the power module in the power of the board after the white wire frame can not touch any device .. because it is high voltage. Note the safety of electricity.
Check Stock

USB Type-C Breakout Board Serial Basic Breakout Female Connector Type PCB Converter Board (5 PCS)

  • Easy to solder:The upgraded USB-C breakthrough board has powerful power,three times the power as much as previous USB. Easy to integrate the USB-C connector into your project without soldering every tiny SMD pad,Easy to solder to the through-board terminals.
  • Simple and sturdy construction:The USB-C breakthrough board can be reversible.That can easily solve the general frustrating problem of USB cables.The USB breakthrough board can adds resistance to the original foundation.
  • Convert efficiently:The USB Type-C Breakout Board contain VBUS, GND, CC1, CC2, D+ and D- pins,In total of 6 USB-C connector that can be connect 0.1" pitch connector.Worked perfectly, The board can provide up to 1.5A nominal power and up to 3A power.Depending on the upstream equipment.Can definitely be used to convert keyboards to USB-C Detachable.
  • Apply for:The USB Type-C board can be used to replace the charging port on the astro a50 headset.PCBs quality and the contacts soldered with ease.Used these to convert an old hardwired keyboard to removable usb-c. Worked perfectly.
  • Package content:5pcs High quality USB Type-C Breakout Boards+5pcs pin connector.
Check Stock

Norcold 621991001 Refrigerator Power Board Kit

  • Norcold Refrigerator Power Board Kit/Eg2.
  • If you match the picture of the board up with your current one, it will be very evident if this is not the board you need.
  • Fits all N611, N610, N811, & N810 models with a serial number below 9056491..
Check Stock

Bluetooth Amplifier Board 25W+25W HF63 Dual Channel Audio Amplifier DC 10-25V Digital Amplifier Module with TDA7492P Chip

  • High Quality : The amplifier board adopts TDA7492P power amplifier chip, high quality electronic components and military grade PCB board, durable in use..
  • 2 Channel : This board is designed with dual channel output, 25W left channel and 25W right channel, high transmission rate and good sound quality..
  • Bluetooth Connection : The amplifier board is designed with Bluetooth V2.1 module and power supply reverse connection protection, convenient and safe to use..
  • Application : This digital amplifier board is suitable for upgrading and refitting the idle sound box and DIY production. It is suitable for speaker of 4Ω, 6Ω, 8Ω, 16Ω (8Ω is the best)..
Check Stock

DC12V-24V 2.1 Channel TPA3116 Subwoofer Amplifier Board High Power Bluetooth Audio Amplifier Board 50W+50W+100W (Bluetooth Amp),Bluetooth Amp

  • tpa3116 amplifier 100W Subwoofer Amplifier Board.
  • Frequency response range: input: 20 hz - 20 KHZ, output: 20 hz - 180 hz.
  • tpa3116 2x50w amplifier board Operating voltage range: DC 12-24V(maximum voltage is no more than 24V).
  • This is a pre-amplifier, bass frequency processing, with bass volume potentiometer control of the bass amplifier board..
  • bluetooth amplifer board DC 12-24V power supply, wide operating voltage, power-saving design, more than 90% power efficiency. Maximum support 100W (Bass) bass channel output.
  • Speaker impedance: bass speaker impedance: 2-8 ohm.
  • You can use a good switching power supply adapter, laptop switching power supply, Here is our 24V power diy amplifier.
Check Stock

Guitar Pedal Board, Aluminium Alloy 2.2lb Light Pedal Board 19.0×9.6×1.7 Inch Black Pedalboard with Hook & Loop Tapes

  • Aluminium alloy material----Made of aluminium alloy, the guitar pedal board, 2.2lb ultra-lightweight, is very convenient and portable for your gig or home practice. With rubber feet, the pedal is quite stable and it can hold 10 mini single pedals..
  • Suitable power supply----All kinds of power supply can fit to this guitar pedal board. You could install power supply anywhere of the pedal board at your will..
  • Well-Adhesive Velcro----Two rolls of Velcro necessary to attach your guitar effects pedals to the pedal board are involved, which are very adhesive. Your pedals will be sturdy on your pedalboard during using and on transportation..
  • Slight incline design----With slight incline design, it is more convenient and comfortable for you to step pedals on the board than the flat design board.
  • Apply to----The guitar pedal board is suitable for beginners and professionals to operate your guitar effects pedals on gig or at home..
Check Stock

Guitar Pedal Board, Aluminium Alloy 2.2lb Light Pedal Board 19.0×9.6×1.7 Inch Black Pedalboard with Hook & Loop Tapes

  • 1.Aluminium alloy material----Made of aluminium alloy, the guitar pedal board, 2.2lb ultra-lightweight, is very convenient and portable for your gig or home practice. With rubber feet, the pedal is quite stable and it can hold 10 mini single pedals..
  • 2.Suitable power supply----All kinds of power supply can fit to this guitar pedal board. You could install power supply anywhere of the pedal board at your will..
  • 3.Well-Adhesive Velcro----Two rolls of Velcro necessary to attach your guitar effects pedals to the pedal board are involved, which are very adhesive. Your pedals will be sturdy on your pedalboard during using and on transportation..
  • 4.Slight incline design----With slight incline design, it is more convenient and comfortable for you to step pedals on the board than the flat design board..
  • 5.Apply to----The guitar pedal board is suitable for beginners and professionals to operate your guitar effects pedals on gig or at home..
Check Stock

Treedix 4pcs USB Type-C Breakout Board Serial Basic Breakout Female Connector Type PCB Converter Board

  • With this USB breakthrough, you will finally be able to integrate the USB-C connector into your project without soldering every tiny SMD pad.
  • This upgraded USB-C breakthrough board has powerful power, three times the power of the previous USB. The breakthrough board adds resistance to the original foundation.
  • This USB-C breakthrough board is reversible, so it also solves the general frustrating problem of USB cables.
  • This board introduces the VBUS, GND, CC1, CC2, D+ and D- pins of the USB-C connector into a 0.1" pitch connector, while providing up to 1.5A nominal power and up to 3A power, It depends on the upstream equipment.
  • Use it to replace the charging port on the astro a50 headset. It can be said to be perfect. There are positioning holes on the breakout board for easy fixation. The hole on the Type-c USB is large enough and the connector size meets the association standard..
Check Stock

Atwood/Hydroflame 33521MC Ignition Board

  • DUAL SENSE - Flame sense works through high voltage connector and edge connector simultaneously.
  • EXTERNAL SENSE -Connector on the board for external sense wire.
  • DIAGNOSTIC-AID LED on board is green to show power to board.
  • VOLTAGE REGULATOR -Cleans up the 12 Volt supply power.
Check Stock

Spot Welder Control Board, 6 Gear Adjustable Spot Welding Machine Lithium Battery Control Board Kit DIY 18650/26650 Batteries, Portable Mini Handheld Welder, Spot Welder PCB Circuit Board (100-900A)

  • ✔Powerful Function - Spot Welder Control Board support welding 0.3mm nickel sheet, 6 gears can be adjusted, support welding current 100A-900A..
  • ✔Safe - Intelligent matching, judge whether the power supply can work, prevent damage to the circuit board, simple operation..
  • ✔Wide Range of Applications - 18650/26650/32650 and other cylindrical lithium batteries, nickel-hydrogen batteries, nickel-cadmium batteries, etc. can be welded firmly..
  • ✔Power Selection - Spot Welding Machine Lithium Battery Control Board needs its own power supply, supporting 6.5V-16V power supply, battery discharge current.
  • ✔Easy to Use - The product package comes with a small file for maintaining the welding pen, main board of spot welder, full set of accessories. In the process of using the spot welder board, see our pictures for details. You only need to provide battery power to connect our motherboard to DIY 18650 and other batteries..
Check Stock