Reviews Power Acoustic 250watt Amp

ALPINE SWT-S10 1200w 10" Car Subwoofer in Bass Tube Enclosure+Amplifier+Amp Kit

  • ... 1500 Watt Peak/750w RMS 2 Channel Amplifier Car Stereo Amp. (1)RockvilIe RWK81 8 Gauge Complete Amp Installation Wire Kit with 100 % Copper RCA. ALPINE SWT-S10 1200w 10" Car Audio Subwoofer in Bass Tube Enclosure 4-Ohm Sub. Subwoofer Type: 10 (25CM) BASS REFLEX SUBWOOFER TUBE. Frequency response: 35 - 200 Hz. Power handling: 1200 Watts peak power and 250 Watts RMS power.
  • Design: Stitched Alpine Logo, Rubber surround and push-type insert terminals. Dimensions: 11.22" x 23.62". Enclosure Dimensions: 11.25"W x 23.65" D. RockvilIe RXA-T1 1500 Watt Peak/750w RMS 2 ChannelCar StereoAmplifier. CEA Compliant Power Ratings: 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD 1 x 370 Watts bridged @ 4 Ohms < 1% THD. 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N. 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD.
  • 1 x 370 Watts bridged @ 4 Ohms < 1% THD. RMS Power Ratings 750 Watts (2 x 375 Watts RMS) @ 2 ohms 1 x 750 Watts @ 4 ohm Bridged Mono 500 Watts (2 x 250 Watts RMS @ 4 ohms) < 1% THD. 750 Watts (2 x 375 Watts RMS) @ 2 ohms. 1 x 750 Watts @ 4 ohm Bridged Mono. 500 Watts (2 x 250 Watts RMS @ ....
Check Stock

Alpine SWT-12S4 1000 Watt 12 Car Audio Bass Tube Subwoofer Bundle with Amplifier and Amp Kit

  • ...ckvilIe RXA-T1 1500 Watt Peak/750w RMS 2 Channel Amplifier Car Stereo Amp. (1)RockvilIe RWK81 8 Gauge Complete Amp Installation Wire Kit with 100 % Copper RCA. ALPINE SWT-12S4 1000w 12" Car Audio Subwoofer in Bass Tube Enclosure 4-Ohm Sub. Speaker System: Bass Reflex Type. 12 (30cm) High-Performance Subwoofer. Peak Power: 1000W. RMS Power: 300W. Overall Dimensions: 12.75" x 25.98".
  • Frequency Response 28 - 200Hz. Speaker Impedance: 4 Sensitivity: 92dB/W (1m). Stitched Alpine Logo. Included Installation Brackets and Belts. Heavy Duty Subwoofer Grill. RockvilIe RXA-T1 1500 Watt Peak/750w RMS 2 ChannelCar StereoAmplifier. CEA Compliant Power Ratings: 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD 1 x 370 Watts bridged @ 4 Ohms < 1% THD. 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N.
  • 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD. 1 x 370 Watts bridged @ 4 Ohms < 1% THD. RMS Power Ratings 750 Watts (2 x 375 Watts RMS) @ 2 ohms 1 x 750 Watts @ 4 ohm Bridged Mono 500 Watts (2 x 250 Watts RMS @ 4 ohms) < 1% THD. 750 Watts (2 x 375 Watts RMS) @ 2 ohms. 1 x 750 Watts @ 4 ohm Bridged Mono. 500 Watts (2 x 250 Watts RMS @ 4 ohms) < 1% THD. Peak Power: 1500 Watts (2 x 750 @ 2 ohms or 1 x 1500 @ 4 Ohms....
Check Stock

Polk Audio MM 1242 SVC 12 1260 Watt Car/Marine Subwoofer Sub+Amplifier+Amp Kit

  • ...o MM1242SVC 12 1260 Watt Single 4-Ohm Car/Marine Audio Subwoofer Sub. Driver Compliment: 12" (304.8mm). Cutout Dimensions: 11" (282mm).
  • Mounting Height: 0.55" (14.06mm). Mounting Depth (Top): 4.64" (118mm). Mounting Depth (Bottom): 5" (132mm). Peak Power Handling: 1260 Watts. Continuous Power Handling: 420 Watts RMS. Nominal Impedance: 4 Ohms. Frequency Response: 26Hz-200kHz. Sensitivity: 87 dB. Magnet Weight:54.4 oz. Magnet Material:Ceramic. Magnet Size:140mm x 60mm x 25mm. VC Diameter: 2". Enclosure Volumes: Minimum Sealed: 1.25 cu. ft. Maximum Sealed: 3.5 cu. ft. Minimum Vented: 1.75 cu. ft..
  • Maximum Vented: 2.25 cu. ft. RockviIle RXA-T1 1500 Watt Peak/750w RMS 2 ChannelCar StereoAmplifier. CEA Compliant Power Ratings: 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD 1 x 370 Watts bridged @ 4 Ohms < 1% THD. 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N. 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD. 1 x 370 Watts bridged @ 4 Ohms < 1% THD.
  • RMS Power Ratings 750 Watts (2 x 375 Watts RMS) @ 2 ohms 1 x 750 Watts @ 4 ohm Bridged Mono 500....
Check Stock

KICKER 43TC104 Comp 10" Subwoofer in Sub Box Enclosure+2-Ch. Amplifier+Amp Kit

  • ...osure, 4-Ohm. (1) RockvilIe RXA-T1 1500 Watt Peak/750w RMS 2 Channel Car Stereo Amplifier. (1)RockvilIe RWK81 8 Gauge Complete Amp Installation Wire Kit with 100 % Copper RCA. KICKER 43TC104 Comp Dual 10" Subwoofers In Thin Profile Sub Box Enclosure, 4-Ohm. Subwoofer Size: 10 inches (25 cm). Impedance: 4 Ohms. Power Handling: .300 Watts Peak .150 Watts RMS. Recommended power range: 75 - 150 watts.
  • Injection molded SoloKon cone. Optimized Polyfoam Ribbed Surround. Extremely rigid cone, along with 360 degree back bracing eliminates distortion. Double stitched surround for enhanced durability. Tinsel leads woven into the spider with Kicker's Spiralead technology. Single high-temperature 4 ohm voice coil. 45 oz. Magnet structure. Frequency response: 30 - 500 Hz. Sensitivity: 88.5 dB. Enclosure: Single 10" Sealed Truck Enclosure. 3/4" MDF Construction. Heavy duty black carpeting.
  • Embroidered Kicker logo. Monogrammed carbon fiber front. Dimensions: . RockvilIe RXA-T1 1500 Watt Peak/750w RMS 2 ChannelCar StereoAmplifier. CEA Compliant Power Ratings: 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD 1 x 370 ....
Check Stock

Hifonics ZTH-1625.5D Zeus 1600 Watt 5 Channel Amplifier Class D Compact Car Amp

  • Specifications: Amp Class: Class D, Amp Total Channels: 5, Amp Max Power (watts): 1600..
  • Amp Power 1 Ohm (ch x watts): 1 x 500 Sub Only, Amp Power 2 Ohms (ch x watts): 4 x 135 + 1 x 250, Amp Power 4 Ohms (ch x watts): 4 x 65 + 1 x 125, Amp....
  • Amp Variable High Pass Crossover 12dB per Octave: 40Hz-300Hz, Amp Tone Control / Parametric EQ: Built-in bass control, Amp Subsonic Filter: 25Hz, Amp....
  • Amp Speaker Level Audio Inputs - Yes, Amp Power Terminal 12v/GND: 4 AWG, Amp Speaker Terminal Wire Gauge: 12 AWG, Amp Fusing: External 100A, Bass....
  • Warranty: 1 Year, Item Weight (lbs): 4.54, Item Length (in): 9.4, Item Width (in): 5.75, Item Height (in): 2.5..
Check Stock

Rockville RXM-T1 1500 Watt Peak Marine/Boat 2 Channel Amplifier Stereo Amp

  • Rockville RXM-T1 1500w Peak / 370w Dyno-Certified RMS Marine/Boat 2 Channel Amplifier Stereo Amp..
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N. 370 Watts (2 x 185 Watts) at 2 ohms 003c 1% THD. 1 x 370 Watts bridged @ 4 Ohms 003c 1% THD..
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). 1500 Watts (2 x 750 @ 2 ohms or 1 x 1500 @ 4 Ohms). High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover. Low Pass Filter : 50Hz - 250Hz. High Pass Filter : 15Hz - 250Hz. Fully Adjustable 12dB Bass Equalizer with Differential Circuitry. 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable..
  • Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. RCA Preamp Line Output. ELNA Brand Audiophile Capacitors. 8 Volt Preamp Circuitry. Status Mode LED Indicator. High Level Input with Smart Auto Turn-On. Minimum THD at Rated Power: 003c 0.05%..
  • Frequency Response : 10Hz - 40KHz. Damping Factor : 003e 200 @ 100Hz. 50 Amp Maxi Fuse. Dimensions : (W x H x L) 8.6" x 2" x 13".
Check Stock

Acoustic Audio by Goldwood HD-525 in Wall Speakers Home Theater Surround Sound Pair

  • FLUSH MOUNT IN WALL SPEAKERS - Wide sound dispersion designed speakers easily integrate with new and existing audio systems, traditional Passive speaker design, simply drive power from your home audio receiver or amp.
  • FULL RANGE 2-WAY SOUND - 5.25" Woven Fiber bulletproof cone woofers with butyl rubber surrounds, pivoting Titanium tweeters, frequency response is 38Hz-22 kHz with 98dB at 8ohm.
  • EASY TO INSTALL - Pressure lock mounting system clamps tight to drywall, fits rectangular speaker hole size of 6.22" x 9.53" with a mounting depth of 2.6", overall size of 7.52" x 10.98" with spring loaded raw wire connections, durable ABS housings and grills can be painted to match your decor.
  • SYSTEM REQUIREMENTS - Any home audio receiver or amp with raw speaker wire outputs, power from your amp should be no less than 10 and no more than 250 watts per channel, CL3 rated in wall certified raw speaker wire to connect your receiver to the speakers.
  • WHAT'S IN THE BOX - 2 Acoustic Audio by Goldwood HD-525 speakers, removeable grills, cut-out template, instruction manual. Use for home theater surround sound, whole house audio systems, business or retail installations.
Check Stock

Acoustic Audio by Goldwood AA351B 2 Way High Performance Indoor Outdoor 500W Speakers with Powerful Bass (1 Pair, Black)

  • OUTDOOR MOUNTABLE WIRED SPEAKERS - Traditional passive speaker design, simply drive power from your amplifier or receiver. Full Range sound coverage with 2-way tweeter and woofer configuration.
  • WEATHERPROOF AND DURABLE - Black ABS sealed cabinets with spring loaded raw wire connectors and mounting brackets are weatherproof against rain, snow, sun, ice and more. Big sound from a compact speaker size of (H x W X D) 6" x 4.25" x 4" each.
  • HIGH QUALITY - 3" Poly Mica woofers with butyl rubber surrounds, .5" PEI dome tweeters, frequency response of 100Hz-20 kHz with 89dB at 8ohm.
  • SYSTEM REQUIREMENTS - Any amp or receiver with raw speaker wire outputs, power from your amp should be no less than 20 and no more than 250 watts per channel, CL3 or raw speaker wire to connect your amp to the speakers.
  • WHAT'S IN THE BOX - 2 Acoustic Audio by Goldwood AA351B speakers, mounting brackets with hardware, instruction manual. Use for home theater surround sound, whole house audio systems, business or retail installations, patios, decks, pool and spa settings.
  • Refer to the User Manual under Technical Specification..
Check Stock

Acoustic Audio PSW250-6 Home Theater Powered 6.5 LFE Subwoofer Black Front Firing Sub,250 Watts

  • HOME THEATER LFE POWERED SUBWOOFER - Dedicated LFE or standard RCA inputs easily connect to your home theater receivers Subwoofer Output. Save power....
  • 250 WATTS PEAK POWER - Integrated high efficiency power amplifier, 30 - 250 Hz with 96dB at 8ohm, Auto ON/OFF and 0 - 180 degree Phase control....
  • 6.5 INCH FRONT FIRING WOOFER - Long throw woofer with high rigidity PVA Treated cone, bottom slotted port, Bass Reflex cabinet with vibration....
  • SYSTEM REQUIREMENTS - Standard US 110V grounded wall plug, any home theater receiver with RCA dedicated or LFE subwoofer outputs, home receiver or....
  • WHAT'S IN THE BOX - Acoustic Audio by PSW250-6 powered subwoofer, 9 foot dual RCA/LFE cable, RCA "Y" adapter, instruction manual - Standing sub with....
Check Stock

One More Night

  • The R2-750X5 full-range class-D 5-channel amplifier (1.9″ x 6.8″ x 11.2″) is packed with features and performance to deliver power and bass on demand with 750 Watts of RMS power.
  • Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 50 Watts x 4 + 200 Watts x 1 @ 4Ω OR 100 Watts x 4 + 350 Watts x 1 @ 2Ω OR 200 Watts x 2 + N/A @ 4Ω Bridged/Mono).
  • Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass.
  • Featuring fully adjustable 12 dB/octave high and low pass butterworth crossovers, balanced differential inputs with RCA pass through outputs, high level input capable, defeat able auto turn on circuit and top mounted controls.
  • Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller.
Check Stock