Reviews Powder coated Steel Flagpole

Eurmax USA Frame Connector Fittings Outdoor Gazebo Commercial Instant Tent, 2Pc Pack

  • This canopy tent frame connector can attach canopy frames easily..
  • This frame connector is adapt to all kinds of pop up canopy with vertical straight leg and flagpole in the market, 1 Year Warranty..
  • Opt for excellent powder coated steel fittings that last longer,helps prevent chipping, peeling, rust and corrosion..
  • Canopy connector fittings include 2 steel sides and center fittings, 2 pack in a carton,Package Dimension: 1.97” x 4.1” x 6.3”..
Check Stock

HOOSUN Flag Pole Kit 6 FT,Flag Pole with Bracket,Heavy Stainless Steel Garden Flagpole, Home,Commercial,Outdoor Wall Mounted Flagpole,House Flag Poles for Porch (6 FT, Black)

  • ...This flag pole kit is made by high-quality stainless steel,Flag pole holders made of premium aluminum alloy and powder coated finish,adopt exquisite craftsmanship.This flag pole is durable,waterproof and rust-resistant, the flag pole will not bend, break or warp easily.The flag pole can be used for a long time.The flagpole can stand strong against winds or rain for the coming years..
  • 【Easy to use】The flag pole is designed with 5 parts,it can be install easily.Each part is 15.6inch and the diameter is 1 inch,and about 6 FT after assembly.This flagpole can be installed by twisting all single flagpoles.Then the work of assembling this flagpole has been completed,it can be used in wherever you want.The flagpole can also be a good gift for seniors, relatives, neighbors and other people to experience another easy way for hanging flag.
  • 【2 Position Flag Pole Bracket】: The Wall Mount flagpole bracket have 2 positions to holds about 1-inch flag pole.Which hold flag with pole in 45-degree or 90-degree angle.Flag Pole Bracket with 1 inch inner diameter. And fit any flag pole which is 1 inch or less. It comes with 3 screws for adjust wing nut for securing the flag pole for flags..
  • 【Applicable Occasions】This flagpole can be widely used in different s....
Check Stock

HOOSUN Flag Pole Kit 6 FT,Flag Pole with Bracket,Heavy Stainless Steel Garden Flagpole, Home,Commercial,Outdoor Wall Mounted Flagpole,House Flag Poles for Porch (6 FT, Silver)

  • ...This flag pole kit is made by high-quality stainless steel,Flag pole holders made of premium aluminum alloy and powder coated finish,adopt exquisite craftsmanship.This flag pole is durable,waterproof and rust-resistant, the flag pole will not bend, break or warp easily.The flag pole can be used for a long time.The flagpole can stand strong against winds or rain for the coming years..
  • 【Easy to use】The flag pole is designed with 5 parts,it can be install easily.Each part is 15.6inch and the diameter is 1 inch,and about 6 FT after assembly.This flagpole can be installed by twisting all single flagpoles.Then the work of assembling this flagpole has been completed,it can be used in wherever you want.The flagpole can also be a good gift for seniors, relatives, neighbors and other people to experience another easy way for hanging flag.
  • 【2 Position Flag Pole Bracket】: The Wall Mount flagpole bracket have 2 positions to holds about 1-inch flag pole.Which hold flag with pole in 45-degree or 90-degree angle.Flag Pole Bracket with 1 inch inner diameter. And fit any flag pole which is 1 inch or less. It comes with 3 screws for adjust wing nut for securing the flag pole for flags..
  • 【Applicable Occasions】This flagpole can be widely used in different s....
Check Stock

HiTow Hitch Mount Flagpole Holder for 2" Hitch Receivers Flag Travel, 8.5" or 11.5" Length Black Powder

  • 8.5″ or 11.5″ usable length, Adjustable thumbscrew holds pole firmly in place, Holds flagpoles up to 2″ diameter, Screw holds pole in place, durable and rust resistant.
  • Come with 2pcs screws, Works great for those vehicles even with spare tire on the back, steady as a rock base for your flagpole (check size carefully if you could use it).
  • Fits standard 2″ hitch receivers, Added a screw hole below the flagpole holder for more stable grabbing, Fly flags from your trailer, The bottom is open allowing the pole to rest on the ground.
  • Finished in black powder coating provide durable and strong conditions, resist dust and corrosion, adds extra durability.
  • Heavy duty steel via robotically welded for superior strength provide excellent mounting facility, high quality hardware fittings, all make this adjustable trailer hitch more durable.
Check Stock

Flagpole Gear Retainer Ring and 3.5 lb Counterweight Set - Flag Pole Accessories - for 15-inch Length Pole (Silver/Gray)

  • FEATURES: Flagpole rings and counterweights ensure your flag hangs and flies properly in the wind.
  • BENEFITS: Helps maintain flag tension and raising and lowering of flag.
  • plastisol coating protects the pole from scratches.
  • COUNTERWEIGHTS: Made of 2" diameter rolled steel coated with silver/gray plastisol.
  • eyebolt allows simple attachment of a link to the retainer ring.
  • RETAINER RINGS: Made from high quality, stainless steel aircraft cable, aluminum crimped sleeves, and silver-dyed, colorfast 1" nylon balls.
  • BRAND PROMISE: High-quality flag pole parts made in the USA.
  • return in original condition for refund eligibility.
Check Stock

ABN Car Flag Pole Stand – RV Flag Pole Kit, Truck Flag Mount – Flag Pole Tire Stand, Flag Pole Holder, Flag Pole Base

  • ...ailgating flag pole mount under your car tire to support your existing flag pole with the weight of your vehicle or underneath front trailer jack.
  • Lock connector pole into base, place assembly on the ground directly in front of your car tire, drive car forward until tire is directly on top of base plate, slide your flagpole into connector pole and tighten with included set screw.
  • Snap release pin on base allows for quick set up and take down.
  • FITS YOUR FLAGPOLE: RV flagpole tire mount base plate is 15.75 inches x 6.3 inches with 0.1-inch thickness (40cm x 16cm x 2mm).
  • Base ring (connects to included connecting pole) is 4 inches (10.2cm) tall with 2.48-inch (6.3cm) outside diameter (OD) and 2.32-inch (5.9cm) inside diameter (ID).
  • Connecting pole is 15.75 inches (40cm) tall with 2.24-inch (5.7cm) OD and 2.2-inch (5.6cm) ID.
  • Fits most standard 20 to 25 foot flag poles.
  • Ensure your flagpole outer diameter meets these size requirements.
  • BUILT TO LAST: Constructed from solid steel with a black powder coat finish for maximum strength and longevity that resists rust and corrosion.
  • Use on any surfaces such as concrete floor, blacktop pavement, or gravel as long as the surface is flat and sturdy.
  • If high winds cause the base to twist or flex, we recommend lowe....
Check Stock

XIFAN Embroidered American Flag with Pole Kit Including 3x5 ft 210D Nylon US Flag, 6FT Black Aluminum No Tangle Spinning Flag Pole, Adjustable Bracket Wind Resistant Rust Free for House Porch Outside

  • 【Exquisite American Flag】- This 3x5 FT US flag constructed with heavyweight material 210D nylon with embroidered stars and sewn stripes. We also adopt canvas header, truly brass made grommets and four rows of stitching on header and fly hem avoid fraying and tearing.
  • 【Superior Spinning Flagpole】- Our 6 FT flagpole is made of powder coated aluminum which is light weighted, durable and rust proof, ensures a long time of use. The free spinning design rotates 360 degrees and prevent from being tangled or furled. Designed for 2x3 ft, 2.5x4 ft or 3x5 ft flags with grommets or sleeved.
  • 【Mounting Bracket】The black aluminum made mounting bracket comes with 4pcs plastic anchor and screws kit. You can sit your flagpole at 45 degree or 90 degree angle and show your pride while expressing your love for our great nation in this way. Easy to install.
  • 【100% Guarantee】We stand behind of our flag and flagpole set, try our best to control the details of each craft strictly and make sure the even high quality. "120 Days Guarantee - No Questions Asked" is offered for you.
Check Stock

Sports Flags Pennants Company Flag Pole Bracket Adjustable Aluminum White Flagpole Holder

  • Made of Rustproof Aluminum, Powder Coated White.
  • Holder of Flagpoles (sold separately) up to 1" in Diameter.
  • Adjusts between 0-180 degree angles, every 15 degrees.
  • Four (4) 1.25" Mounting Wood Screws are Included.
  • Thumb Screw provided to Secure your Flagpole within Bracket.
Check Stock

American Elite Telescoping Flagpole Kit (Dark Bronze Anodized, 20)

  • Anti-wrap Design: The 360 degree free rotation stainless steel ring ensures strength and hardness. At the same time, the excellent anti winding performance can make the flag fly freely in the wind and prevent the flag from winding the flagpole..
  • Durable Design: The high-quality aluminum alloy ring body and stainless steel ring design make the flagpole ring durable, light, no rust, no flading, no deformation and no cracking. They can adapt to all kinds of harsh environments..
  • Adjustable Screw: Use 2 screws to adjust the diameter of flagpole ring. The long screw is suitable for 0.75 inch flagpole, while the short screw is suitable for 1 inch flagpole. You can install flagpole in the 0.75-1.02 inch diameter range..
  • Hook Design: 2 pack aluminum mounting rings and 2 piece aluminum hooks for you. You can link the flagpole ring hole and the flag with the hook..
  • Install Note: Please pay attention to the installation direction of the flagpole ring and ensure that the position of the ring is relatively inward..
Check Stock

25' Telepole \Superior 1\ Telescoping Flagpole - 2.75\ Base Diameter, 10 Gauge Aluminum - Silver

  • Anti-wrap Design: The 360 degree free rotation stainless steel ring ensures strength and hardness. At the same time, the excellent anti winding performance can make the flag fly freely in the wind and prevent the flag from winding the flagpole..
  • Durable Design: The high-quality aluminum alloy ring body and stainless steel ring design make the flagpole ring durable, light, no rust, no flading, no deformation and no cracking. They can adapt to all kinds of harsh environments..
  • Adjustable Screw: Use 2 screws to adjust the diameter of flagpole ring. The long screw is suitable for 0.75 inch flagpole, while the short screw is suitable for 1 inch flagpole. You can install flagpole in the 0.75-1.02 inch diameter range..
  • Hook Design: 2 pack aluminum mounting rings and 2 piece aluminum hooks for you. You can link the flagpole ring hole and the flag with the hook..
  • Install Note: Please pay attention to the installation direction of the flagpole ring and ensure that the position of the ring is relatively inward..
Check Stock