Reviews Position Gauge

DeWalt 5140032-78 Replacement Table Saw Miter Gauge

  • The purpose of a miter gauge is to allow user to position and safely guide the workpiece. This replacement miter gauge is simple to install, which minimizes downtime..
  • The miter gauge only fits DeWalt DWE 7490X Type 1, DWE 7490X Type 2, DWE 7491RS Type 1, DWE 7491RS Type 2, WE 7499GD Type 1, DWE 7499GD Type 2.
  • The miter bar swize is 22.5mm x 9.2mm x 300mm(W x H x L)..
  • There are lines for every one angle on miter gauge body, including larger lines at the five degree marks( 30, 45, 60, 75 and 90 ).This allows you to adjust the miter gauge to any angle you need..
Check Stock

Polaris 2011-2013 Ranger Speedo Ranger 2411606 New Oem

  • Complete functions: the function includes (speedometer, tachometer, fuel gauge, water temperature gauge), the LCD screen is very clear, the viewing angle is large and the soft vision, relieve eye fatigue..
  • Left and right turn signals: show where the vehicle's turn signals are located. Usually in the flameout state, when the owner lights the turn signal, the indicator will light up in the corresponding direction..
  • Gear position (N, 1-6 gear position display function, and there is no need to add another gear positioner) KM / H to MPH (metric system display switch).
  • Oil quantity indicator: shows the amount of oil stored in the vehicle. When the electric door is opened and the meter performs self-test, the fuel gauge function prompts you whether you need to refuel..
  • High beam: display the status of the vehicle high beam, usually extinguished, when the owner turns on the high beam, the indicator light indicates that the vehicle high beam is on.
Check Stock

48 Pc Thread Measuring Wire Set 16 Different Diameter Sizes Pin Set

  • Material: the screw gauge tool set is made of stainless steel and processed with chrome finish, it combines high strength with good resilience and elegant appearance.
  • It won't get rusted easily and owns long lasting durability.
  • Package content: the screw gauge tool set contains 3 x screw pitch gauge and 3 x center gauge.
  • Thread pitch gauge function: can be applied to measure the pitch of the thread.
  • Center gauge function: apply to grind and position thread cutting tool on a lathe.
  • Advantage: accurately measures internal and external screw threads with thread blades of varied size, they worked well to measure both screws and figure out what type of replacements.
Check Stock

6\ / 150 MM DEPTH GAUGE METRIC & IMPERIAL STANDARDS - ENGINEERING

  • 6" / 150 MM DEPTH GAUGE METRIC & IMPERIAL STANDARDS - ENGINEERING.
  • This steel depth gauge is used to quickly obtain measurements of holes or grooves by adjusting the rule to the desired depth.
  • This depth gauge consists of a gun metal finished base and a steel rule.
  • This gauge can be adjusted to the required measurement and then locked into position by a knurled nut.
  • Head is cut out on one side, adjacent to the rule, permitting easier and more precise measurements.
Check Stock

ChgImposs Screw Thread Pitch Cutting Gauge Tool Set, Stainless Steel Centre Gage with 55 Degree Inch System & 60 Degree Metric System

  • Used to measure the pitch of the thread and the tooth-shaped corner.
  • It sets 4pcs centre gage 55 Degree Inch System & 60 Degree Metric System, 52 pcs.
  • Center Gage use to grind and position thread cutting tool on a lathe. Typically used to check the thread size determination is correct.
  • All 52 pcs was made by stainless steel, not easy to rust. Ensure the accuracy of measurement..
  • Package Include: 1 x 52 Blade thread gauge.
  • 1 x ISO Metric 60°centering gauge thread gauge Tool.
  • 1 x English Wyeth 55°centering gauge thread gauge Tool.
  • 1 x American Standard 60°centering gauge thread gauge Tool.
Check Stock

Center Gage Thread Gauge Whitworth 55 & 60 Degree Inch Metric Screw Thread Pitch Gauge 3pcs

  • 【Material】The screw gauge tool set is made of stainless steel and processed with chrome finish, it combines high strength with good resilience and elegant appearance.
  • It won't get rusted easily and owns long-lasting durability.
  • 【Package content】The screw gauge tool set contains 3 x screw pitch gauge and 3 x center gauge.
  • 【Thread pitch gauge function】Can be applied to measure the pitch of the thread.
  • 【Center gauge function】Apply to grind and position thread cutting tool on a lathe.
  • 【Advantage】Accurately measures internal and external screw threads with thread blades of varied size, they worked well to measure both screws and figure out what type of replacements.
Check Stock

Black Bolt Gauge SAE Metric Check a Thread Size FastenerLine 901303

  • 29° ACME Thread Gauge-The 29 degree stainless steel acme thread gauge is a single piece type and it is applied to measure thread and external thread tooth pitch.The acme thread gauge range:1-10TPI,the pitch:1,1-1/3,1-1/2,1-3/4,2,2-1/2,3,4,5,6,7,8,9,10.
  • Suitable for-Standard gauge for check the angle of screw cutting tools,check the width of screw cutting tools and set the position of screw cutting tools.
  • Material of stainless steel-This acme thread gauge is made by stainless steel.Not easy to rust and not easy to bend.You needn’t to use anti-rust oil or take any anti-rust ways.Just put the 29 degree acme thread gauge in a dry place and it won’t rust.
  • Clear scales-All the scales on the acme screw gauge are laser engraving,not painting and the acme thread gauge is not the copy of laser engraving. Don’t worry about the long friction will make the scale unclear.
  • Quality after-sale Service- If you are experiencing quality issues or any problems when you receive this acme thread gauge, please feel free to contact our customer service in time and let us know the issue. We offer further solution for you to your satisfaction.
Check Stock

Cressi Sub Start Equipment for Scuba Diving, made in Italy

  • PACKAGE INCLUDES: Cressi Start BC, Cressi AC2 XS2 Regulator-Yoke, Cressi XS Octopus with Hose, Cressi Mini Two Gauge Analog Console, (Imperial).
  • START BCD: Ultra durable construction. 2 large pockets cargo pockets with velcro closure. Rigid padded backpack and carry handle. Three exhaust valves for buoyancy adjustment in any position. 2 technopolymer d-rings. 2 spring-clip holding rings. Octopus holder. Gauge holder..
  • AC2 XS2 REGULATOR: Non-balanced first stage with high performance and reliability.Downstream system. Adjustable intermediate pressure from the out side of the regulator due to our patented ACs design..
  • XS OCTOPUS: The XS second stage features a comfortable mouthpiece and an easy to purge button. Adjustable venturi effect. Easy maintenance. Jacketed Hose extremely light and flexible..
  • MINI 2 GAUGE: Pressure gauge dial is color-coded in red, green and blue for instant readability. Reads pressures to 350 bar or 5000 psi. Mini-depth gauge reads to 70 meters (230 feet). Maximum depth indicator. Luminescent face on the depth gauge.
Check Stock

Hobart 500559 Handler 140 MIG Welder 115V

  • 5-position voltage control selector adds a smooth, stable arc at all welding thicknesses.
  • Weldable Materials: Steel, Stainless Steel and Aluminum.
  • Welding Processes: MIG(GMAW), Flux Cored(FCAW).
  • Operates off 115V standard household current.
  • Wire Feed Speed Range 40-700 IPM, 50-740 IPM at no load.
  • What's Included: 10ft HR-100 MIG gun, 10ft work cable with clamp, Power Cord, Dual-gauge regulator with gas hose, .030 in. contact tips, Quick Select drive roll, Sample spool of flux-cored wire and Material thickness gauge.
Check Stock

6 Pieces Stainless Steel Screw Thread Pitch Cutting Gauge Tool Set, 3 Pieces Center Gage, 1 America Type, 1 Metric America Type, 1 Metric Imperial US for Industrial Measurement

  • Material: the screw gauge tool set is made of stainless steel and processed with chrome finish, it combines high strength with good resilience and elegant appearance.
  • It won't get rusted easily and owns long lasting durability.
  • Package content: the screw gauge tool set contains 3 x screw pitch gauge and 3 x center gauge.
  • Thread pitch gauge function: can be applied to measure the pitch of the thread.
  • Center gauge function: apply to grind and position thread cutting tool on a lathe.
  • Advantage: accurately measures internal and external screw threads with thread blades of varied size, they worked well to measure both screws and figure out what type of replacements.
Check Stock