Reviews Portable Bilge Pump

Premium Bilge Cleaner Concentrate for Boats Marine Boat Cleaner Soap Grease Oil Fuel and More

  • POWERFUL CONCENTRATE CLEANS BILGE AND REMOVES ODORS: Our bilge cleaner is a powerful oil eater that emulsifies boat oil, grease and transmission fluid to keep your bilge clean and odor-free. Simply pour in bilge pumps for boats and our oil eater cleaner degreaser works for emulsifying and deodorizing the bilge tank and bilge hose. This bilge degreaser super cleaner bilge pump cleaner dissolves fuel, sludge, scum and transmission fuel to keep your bilge pump operating smoothly and efficiently!.
  • EMULSIFIES & ELIMINATES GREASE & OIL: This oil eater degreaser works as a super clean degreaser for the inside of your bilge! Bilge pump boat juice is an essential staple to your boat cleaning supplies kit to keep your sludge pump odor free and running properly. Our concentrated oil eater cleaner and degreaser maintains a proper working marine bilge pump and boat bilge pump without harming fiberglass, plastic or metal on your boat. Regular use keeps an automatic bilge pump running smoothly..
  • FAST & EASY TO USE: Simply pour in and run boat for at least one hour. The natural motion of the boat works to scrub the bilge. Then drain or pump out into a container that is in accordance with the law. Repeat process until no sludge remains. To maintain, repeat process once....
Check Stock

Attwood 4608-7 Tsunami T800 Bilge Pump, 800 GPH, 12-Volt, Barbed ¾-Inch Diameter Outlet, 29-Inch Wire

  • What you will get: the package contains 1 piece of 12 V boat bilge water pump and 1 piece of automatic boat bilge pump float switch, nice combination for you to drain the water easily.
  • Basic parameters: the flow of the pump is 1100 gallons per hour, the flow rate is 1100 GPH, the voltage is 12 V DC, and the head is 13 ft (4mts).
  • Outlet diameter: 1-1/8 inch/ 29 mm, cable length: 3.3 ft/ 1 m.
  • The float switch's max amps 12 volts: 20 A.
  • The wire length is 3.3 ft/ 1 m, the wire gauge size is 18 AWG.
  • Electric bilge pump: the electric bilge pump is great for you to drain water efficiently, which has a good motor and help drain the water efficiently.
  • It is a good forhydraulic systems fed with cold water and can be applied in line to be fed by gravity or pressure.
  • Automatic boat bilge pump float switch: the float swith is automatic, it will turn the boat bilge pump on when water level reaches 2 inch (51 mm), and it will turn the pump off when water level reaches 0.7 inch (19 mm).
  • It is good flow sensor for bilge pumps, and it features with a removable base for easy cleaning.
  • Wide range of application: the boat bilge pump and automatic float switch can be applied for fishing boats, cruisers, runabouts, yachts and mo....
Check Stock

AMRM-4505-7 Attwood Sahara Automatic Bilge Pump - 500 GPH

  • The Attwood Sahara Bilge Pump is a durable, compact, and easy to install automatic bilge pump. The Sahara has everything contained in one compact yet durable package, making this pump a great option for tight spaces. This series of bilge pump features a 316 stainless steel motor shaft for corrosion resistance and a durable high-impact, glass-filled polyester impeller. The base of the pump has quick, one-handed removal for easy disassembly for cleaning..
  • Pumps include 36" lengths of 16-gauge caulked and tinned copper wire. An automatic-switch bilge pump is a requirement for any vessels 20’ especially those that accommodate overnight passengers and crew. All Attwood bilge pumps come with a 3 year manufacturer's warranty..
  • Mercury-free switch. Test knob for easy operational check Non-restrictive float movement. Larger filter area resists clogging.
  • Free flow of water around housing keeps motor cool. 316 Stainless Steel motor shaft for saltwater corrosion resistance. Durable high-impact, glass-filled polyester impeller.
  • Sahara S500 Part #: AMRA-4505-7, GPH at Open Flow: 500, GPH at 3.3' Head: 350, Hose Size: 3/4" I.D..
Check Stock

Shoreline Marine Bilge Pump Plumbing Kit | Plastic Bilge Pump Hose | 2 Stainless Steel Hose Clamps | Easy Installation | Heavy-Duty Marine Accessory

  • BILGE PUMPS & PLUMBING: The kit is among the functional boat accessories that allow you to remove the accumulated water from the bilge. This kit consists of a plastic bilge pump hose, thru-hull fitting, and 2 stainless-steel hose clamps..
  • HIGH COMPATIBILITY: Irrespective of the size of the boat, this high utility water pump works in accordance with 3/4" x 5" of the plastic bilge hose. This kit contains everything you need for bilge pump installation..
  • EASY TO USE: With a pack of all the essential parts and equipment required to perform the pumping task, this kit makes it one of the best marine boat accessories. It is fast and easy to use..
  • DIMENSIONS: The kit consists of 3/4 inches and 5 inches of plastic bilge pump hose, along with a thru-hull fitting and 2 stainless-steel hose clamps that work efficiently to remove the excess water from the hull. It works wonders with a bilge pump float switch..
  • CALCUTTA OUTDOORS: A leading manufacturer of consumer products for the outdoor sports and recreation market providing performance-driven products, including fishing rods, ta....
Check Stock

Hand Bilge Pump Manual Hand Water Pump for Kayaks Canoes and Boats Emergency Hand-Operated Marine Bilge Pump with Reversible Hose

  • ⛵HAND BILGE PUMP FOR BOATS: Our manual bilge pump length is 17", and the maximum unfolded length is 28.3", which is easy to store and takes up minimal space. It’s the perfect boating accessory for kayaks, canoes, dinghys and small boats. Our bilge pump remove water quickly and downward strokes for maximum efficiency and less fatigue.
  • ⛵MAKES WATER REMOVAL EASIER & FASTER: Our hand water pump features a 34.6" long hose with a 1.16" intake nozzle and 1.37" diameter hose that makes reaching the bottom of your boat easier and removing excess water faster. This hand suction pump works great to remove water from the bottom of a motorboat, canoe or dinghy.
  • ⛵EASY TO USE: Just simply connect the hose to the end of the pump, insert the bottom of the pump into the water, and use the handle to start pumping. It sucks water when you push the handle in, and disperses the water when you pull the handle out!.
  • ⛵NO CLOG FILTER & ANTI-LEAK DESIGN GASKET: Our marine bilge pump Features a filtered nozzle to prevent seaweed, leaves and debris from clogging this hand water pump. And The premium rubber sea....
Check Stock

attwood Sahara MK2 800 GPH 12-Volt Automatic Bilge Pump

  • 800 GPH, 12V, Fuse size: 4A, Outlet type: 3/4" & 1" barbs, Check valve: yes, Wire length: 29 1/2".
  • The easiest, most reliable automatic bilge pump ever designed.
  • The only automatic bilge pump that eliminates air-locks, Patented X-Air Impeller ejects trapped air in the pump and pipework.
  • Flexible Outlets: 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation.
  • Single-Hand Pump Cartridge Release: Convenient when trying to access a pump located in a hard-to-reach area of the boat’s hull.
  • Universal Backwards Compatible Design: 7-pump mounting hole pattern for replacing any top bilge pump in its category.
  • SteadySwitch: Buoyancy control reduces cycling, draining the bilge not the battery.
  • No Pipe Or Hose Removal Required: Reduces the time that it takes to replace the cartridge.
  • Improved Motor Cooling/Heat Dissipation: Prevents overheating that may cause failures, such as blown fuse, leaking, etc..
  • Includes straight outlet and check valve.
Check Stock

Johnson Pumps - 22102 PROLINE Bilge Pump 1000 GPH 2.5A

  • No one wants to worry that their boat is slowly taking on water because the bilge pump has failed. Well, you can sleep soundly with the reliable 2000 bilge pump on the job.Small size, high efficiency, low current (low cost switching power supply supporting).
  • to achieve a small size perfect combination of high flow..
  • It is non-automatic and must be paired with a float switch or sensor and ON/OFF/AUTO switch. Unique automatic "discharge" function can bear the long-term continuous operation under nearly congestion condition Impact resistant ABS housing.
  • Used in a boat,you can also use it in solar powered waterfall for your backyard, in a battery back-up sump system,etc. It empties the bilge roughly 25% faster than 1500gph bilge pump,and will continue to pump even when it encounters some minor debris.
  • Heavy duty motors with stainless steel shafts and tough. thermoplastic bodies submersible bilge pumps are tough enough for any bilge.Tough, efficient, long life motor.Offer high capacity output Water cooled long-life motors.
  • Ignition protection Water/moisture tight seals.
  • Snap lock strainer base for easy installation and removal.
Check Stock

Boat Marine Manual Hand Bilge Waste Water Transfer Pump Qiilu Plastic Handle Marine Manual Diaphragm Hand Bilge Water Pump for Boat Yacht

  • Excellent Design------Boat Marine Manual Hand Bilge Waste Water Transfer Pump is suitable for compact manual self-priming pump. Provides flow rates up to 12 gallons per minute (45 liters per minute)..
  • Durable and Reliable------Boat Marine Manual Hand Bilge Waste Water Transfer Pump has a robust and durable construction designed for marine applications. Ideal as a backup bilge pump in case your electronic bilge pump fails..
  • Specifications------ Manual Diaphragm Pump, Material: ABS, Diaphragm Manual Pump with Two Position Handle, Packing List: 1 x Manual Diaphragm Pump, 2 Adapters, 2 Seals..
  • Dimensions ------- Hose Inlet: Approx. OD. 1.36" (34.5 mm), Hose Outlet: Approx. OD. 1.36" (34.5mm), Max Suction Lift: Approx. 10ft (3m), Max Discharge Head: 13ft (4m). Flow: 720GPH (2724 LPH).
  • Easy to use------fixed handle with rubber handle, easy to use. Installation can be done without complicated steps..
Check Stock

SeaChoice 19301 Submersible 2000 GPH Bilge Pump

  • 【Specification】：Outlet Diameter : 29mm/ 0.95 Inch (1-1/8") POWER：1100 GPH Current(A）：3.2A Volt：12V.
  • 【Automatic mode connection】：Connect black wire to negative,Connect brown wire to positive,the pump will be shut off automatically when the water is pumped out.This auto bilge pump 1100 gph would improve work efficiency and could be used for a long term..
  • 【Advantages】:Equipped with built in electronic controlled sensor system for easy fully automatic operation.It is a small automatic boat bilge pump and it is rustproof and corrosion resistant..
  • 【Warning】:This auto boat bilge pump is designed for use with fresh water and salt water only. And polarity is important. If it is not correct, the pump rotate backwards..
  • 【Applications】:Ideal For Fishing Boats, Cruisers, Runabouts, Yachts, skiff, etc..
Check Stock

ZuwaUSA Drill Powered Pump ¾” 8 GPM - Marine Grade Aluminum | Unistar-2001A (Drill not included)

  • CONNECTION: 3/4” NPT | Dry self-priming to 13 Ft. | Max temperature 200°F | Working pressure of 58 PSI | The 3/8” shank fits all common chucks for most drills.
  • FLUID VISCOSITY: 1 (water) to 20,000 cP (heavy gear oil) | Transports a wide range of liquids, including liquids containing solids, oils, and corrosives.
  • DRILL POWERED: ZUWAUSA heavy-duty drill powered pump is designed to work with rechargeable/electrical drills with a maximum speed of 3,000 RPM.
  • FLUID TRANSFERS: water, seawater, wastewater, diesel fuel, biodiesel, vegetable oils, gear, motor and heating oil, detergents, antifreeze, chemicals, cooling lubricants..
  • EXAMPLE APPLICATIONS: diesel / home heating oil, remote sludge transfer, gear box oil changes, domestic water supply, flooded basements, barrel emptying/filling, draining waste oil, sewerage disposal, fueling vehicles, car wash, draining aquariums, disposal of cooling lubricants, bilge pump, booster pump..
  • OTHER TERMS FOR THIS PRODUCT: Coolant purge pump, Water purge pump, Oil purge pump, Fluid purge pump, Drill pump, portable water pump, portable oil pump, portable coolant pump, Heating oil transfer pump.
Check Stock