Reviews Pop Socket Car Mount Dashboard

3M Sticky Adhesive Replacement for Magnetic Dashboard Car Mount Holder Base, VOLPORT 5 Pack Rectangle Heat Resistance Double Side Tape VHB Sticker Pads for Dash Magnet Phone Mounts & Ring Grip Socket

  • For Dashboard Magnetic Mount Base: Volport rectangular 3M adhesive sticky replacement fit 95% stick-on dash magnetic phone car mount holder with rounded rectangle base on the market. When your magnet dashboard car holder lost its viscosity, these 3M double-faced tapes backup replacement parts mounting adhesives is a good way to re-stick/reuse dashboard car phone mount & Phone Dock. Size: 1.85″ * 0.87″, the thickness is 0.047″. Can be cut circle disk/disc to fit ring grip socket car mount’s back..
  • Heat Resistance Car Holder Adhesive: These iphone dashboard car mount backing stickers is high temperature(120℃+) resistance in hot Summer Texas. Extra strong both side squares 3M VHB dashboard cell phone mount replacement adhesion pads’s stickiness is 40% stronger than original 2 side sticky glue, easy to fix your car magnetic phone holder base, heavy duty dashboard mount 3M vertical adhesive sticker tab for car mount base, stable and secure driving uber, truck, jeep, vehicle in bumpy roads..
  • NOTE TO USE 3M CAR MOUNT ADHESIVE: 1.Please don’t stick the 3M replacement sticky adhesive pads on rugged, texture, grease or leather surface. 2.Make sure the desired surface is clean and dry, that means no wax, dirt or porous....
Check Stock

Suction Cup Phone Holder for Socket Users pop-tech Dashboard Car Phone Mount for Collapsible Grip with Adjustable 360°Rotation Includes 3M Sticky Adhesive Replacement for Expanding Stand - Black

  • Strong Adhesive with Suction Power - Bendable suction cup phone holder for socket mount hole with sticky pads aims down the dash and do not obstruct....
  • Compact & Flexible Design - Small size will not block your view or air outlet in the vehicle. The foldable and adjustable arm with knob allow you to....
  • 360 Degrees Rotation - Heavy duty mountable dashboard car phone mount slot with rotating swivel ball joint to adjust and rotate it even 90°degree....
  • Super Easy To Install - Connect the screw with mount, put the cellphone to screw on. Please make sure mounted on flat and smooth spot in car dashboard....
  • What You Get A Set Combo - New black pop-tech luxe suction cup phone mount brackets fits for premium collapsible grip stand low profile, additional 2....
Check Stock

Suction Cup Phone Mount for Socket User, pop-tech Dashboard Car Phone Holder Cradle for Collapsible Grip with 7.5 Inch Long Arm Gooseneck & Anti-Shake Stabilizer Compatible with iPhone Samsung Galaxy

  • ...genuity & Double Stability - Extra strong vacuum suction cup with antislip and super stick self-adhesive sticky gel, anti-shake stabilizer prevent android phone from vibrating and shaking, sticking it clamp more stable and lockable, apps to hold and tight your cell phone/tablet sturdy built in the car dash board or dashboard/window shield or windshield on multiple surface on desktop, countertop, desk or multi-surface as multipurpose phone holder sliding into the movable expanding grip..
  • Multifunctional & Flexible Bendable Arm - Universal long arm socket holder with sticky stuff allows you to attach and adhere to the cellphone within reach and adjust the flex extendable neck. Functional cell phone windshield mount with adhesion support for smart phone. Adjustable goose neck extension longarm can be unobstructed view for safer drive. Heavy duty & handsfree small 3d gooseneck phone mount stands cradles good for truckers fitting with luxe socket grips and socket holder attachments..
  • 360 Degree Rotation & One-Hand Operation - Portable and rotating adjustable head connector rotate & swivel any angles to use with heavy phone at stationary viewing angle and stick-on-dashboard in the vehicle. Hands free gravity long neck phone holder can be accessible and adapt....
Check Stock

Car Grips Mount for Phone Stand, pop-tech 2 Pack Car Phone Holder for Collapsible Grip/Socket Mount Users with 3M Sticky Adhesive Replacement Used on Dashboard, Home, Desk, Wall - Black

  • ... the device more secure and comfortable for protecting the device and car dash. Just clean wherever flat surfaces what you want to install, peel off the sticker adhesive then stick on it, let it sit for 24 hours to settle for better connecting to the surface..
  • Wide Compatibility: This phone stand mounted on the dashboard is strong enough to hold the cell phone firmly even over rough roads while driving. Compatible with i Phone Xs Max Xs Xr X 8 plus 8 7 plus 7 6s plus, Samsung Galaxy Note 9 Note 8 S10 S9 S8 S7, LG, Huawei, Moto G5, Google Pixel 3Xl 3 2Xl 2 and more..
  • Multi-Surfaces and Various Colors of Grip Mount: Stick this car phone holder to wherever you’re going to mount, like car dashboard, office, home, kitchen, bedroom, mirrors, wall, glasses, locker and more. Great for using GPS app while driving as car phone dashboard mount, convenient for easy making up, continue to listen to music or watch video while cooking. The various and vibrant color of grip mount we design is for girls and boys with different colors of phones, like red, blue, pink, yellow..
Check Stock

Stinger SSPW18BK Black 18Ga Primary Wire Cable 1000'

  • connecter: USB 2.0 male and 3RCA to USB & 3.5mm Female,Bracket included to allow mounting of socket on your car's dashboard.2meter long cable,Water Proof Mount Rubber cover..
  • For use with any stereo with USB capability and/or auxiliary audio inputs,1/8 audio jack allows input of any MP3 player or external audio device..
  • Use an existing hole or cut a about 25mm hole in your dashboard,clip the adapter socket, through the bracket fixed,this way, you can flush mount the cable to your vehicle's, boat’s and motorcycle’s dash..
  • Connector 1:standard USB 2.0 & 3RCA Male.
  • Connector 2: standard USB 2.0 & DC 3.5 mm Female.
  • This product is designed for in car use only.Use this product to extend your radio's RCA audio-in and USB ports to vehicle's dashboard, center console or other location.Use this adapter set to convert RCA audio-in port to 3.5mm audio socket.USB A-type port will provide high speed data transfer and device charge power..
Check Stock

[14 Pack]- Pop 3M Socket Sticky Adhesive Replacement with 2pcs Alcohol Pads, 3M VHB Double Sided Tape for Grip Holder and Magnetic Phone car Mount

  • [14 Pack Double-sided sticky pads for Pop Socket & Mount, Phone grip,etc ] Included 1.35 inch and 0.9 inch Double-sided sticky pads, which is proved to be the perfect size for pop socket, phone grip,finger ring holder, VAVA magnetic phone car mount. Also works for dash cam mount..
  • [Stick well on different material, even fabric] it can stick to anywhere there is a flat, hard and dry surface, like a Otterbox case, a lifeproof case, a case made of fabric, faux leather, PC, tempered glass, silicon or rubber, fiberglass, glass windshield,car dashboard, locker, mirror, refrigerator, bed post, wall and ect..
  • [Extra Strong & Durability, Hold 53oz For 11 Years] 3M VHB is made of polyacrylate, whose main chain is C-C bond.After testing, that makes it can hold anything with 53oz for 11 years, between 70°F and 100°F..
  • [Easily install] With 2pcs alcohol pads, remove the old adhesive without difficulty and residue. And with the special design of the adhesive paper, it is easy to peel off both sides..
  • [Strong But Thin] Only 1mm thickness makes it nearly invisible. With black strong 3M VHB, the tape is very sticky and lasts very long..
Check Stock

Car Phone Mount Windshield, Long Arm Clamp iVoler Universal Dashboard with Double Clip Strong Suction Cup Cell Phone Holder Compatible iPhone Xs XS Max X 7 8 Plus 6 Plus Galaxy S9 S8 S7 Plus Note 9

  • Extremely Strong Suction with switch for quick use, well adhere to your windshield or dashboard. Easy to install and no tools requires..
  • Adjustable clamp can hold devices up to max 3.54 inches (90mm) for width, fits most types of phone .Red rubbers on clamp can well protect your phone not damaged. You can use this phone mount if you have a pop socket on the back of your phone.You don’t need to remove pop sockets and the clamp will avoid to damage it..
  • DASHBOARD PAD & SUCTION CUP: Includes a semi-permanent dashboard disc that applies directly to the dashboard. Place the suction cup directly on top of the dashboard disc for a smooth hold.Long Flexible Arm/Gooseneck Shockproof Design allows for easy positioning, and bring device close to you. You can keep your eyes up instead of looking down at your phone..
  • DASHBOARD MOUNTING: Before installation we recommend that both surface area and the product itself have a temperature above 40F. In addition, please let the dashboard pad sit for 30 minutes, before installing.Full 360 Degree Rotation with a adjustable clamp head, you can adjust your phone for good viewing..
  • iVoler UPDATE VERSION 6 Inches Long Arm/Neck Car Mount With Strong Suction of Three layers and X Clamp, provide you perfect viewing an....
Check Stock

Small USB 3.0 Male to Female AUX Flush Panel Mount Extension Cable for Car Truck Boat Motorcycle Dashboard 3ft

  • This cable design for car,boat and motorcycle,USB 3.0 A male to USB 3.0 A female extension flush panel mount waterproof cable..
  • Mount cable can be used above the base of the car's dashboard or on the other dashboard,such as boat,motorcycle. Use an existing hole or cut a hole on....
  • Use an existing hole or cut a hole on your dashboard and clip in the socket to flush mount it to your vehicle's,boat’s and motors..
  • Ideal for extend and accomplish the data transfer in your car, boat, motorcycle, support very easy access to your accessory inputs.
  • USB 3.0 Male to Female AUX Flush mount cable, small one, 3ft length..
Check Stock

BATIGE Alloy USB 3.0 AUX DC3.5mm Port Car Mount Flush Cable for Car Boat Motorcycle Dash Panel with LED Indicator – 3ft

  • This batige cable designed for in car but can be used for any application, such as bike, marine, etc..
  • Use an existing hole or cut a hole in your dashboard and clip in the socket to flush mount it to your vehicle’s dash..
  • Bracket included to allow mounting of socket on your car’s dashboard..
  • Works with vehicles with 3.5mm AUX or USB 3.0 Input for extension/mount.Water Proof Mount Rubber cover.
  • Ideal for newer aftermarket head units such as Pioneer, Kenwood and Alpine that feature a rear USB input.
Check Stock

BATIGE Square Single Port USB 3.0 Panel Flush Mount Extension Cable with Buckle for Car Truck Boat Motorcycle Dashboard 3ft

  • This batige square USB 3.0 panel flush mount cable design for car,boat and motorcycle..
  • Single port USB 3.0 panel cable is made of premium material, it is a nice heavy duty cables. You can use this USB 3.0 dash mount cable as an USB extension for not only a car,boat,motorcycle dashboard, but also a studio set up that you have..
  • The square USB 3.0 car mount flush cable is thick and durable, in normal cases,use an existing hole or cut a hole on your dashboard and clip in the socket to flush mount it to your vehicle's,boat’s and motors..
  • Ideal for extend and accomplish the data transfer in your car, boat, motorcycle, support very easy access to your accessory inputs. And USB 3.0 backward-compatible USB 2.0..
  • This square USB 3.0 panel dashboard cable is Male to Female,with buckle,very easy to install, 3ft length..
Check Stock