Reviews Pool Filter Valves

KTWT Replacement Ground Swimming Pool Filter Pump Strainer Hole Plug Stopper for INTEX & Bestway Pools 2Pack

  • 2 Pack - Replacement Ground Swimming Pool Filter Pump Strainer Hole Plug Stopper.
  • This Replacement Strainer Hose Hole Plug for Intex, Bestway, Coleman, Summer Escape swimming pools that do not have plunger valves so you can replace the filters in the pumps..
  • part for Pump models 530/1000 gph or smaller. pool skimmer plug Made of Durable Plastic.
  • These plugs are used for pool that take 1.25" diameter hoses that do not have plunger valves to stop the water during filter change. It is used to replace the filter pump, and hold back the water while cleaning pump filter..
  • Service After sale: Please confirm the size of the item before purchasing. The size details of the product are shown in Figure 2. For any reason you‘re not completely satisfied, please feel free to contact us, we will offer you a replacement or full refund. High-quality products and service is our priority..
Check Stock

CMP Pressure Gauge 0-60 PSI for Pentair and Hayward Pool Filter Back Mount

  • 【GREAT REPLACeMENT】190058 Pressure Gauge Replacement for Pool Spa Valve and Filter.Provides Accurate Readings of Filter Pressure Pump from 0 to 60 PSI.Easy to install, Turn off your pump before installation and partially drain the filter.Do not overtighten the Pressure Gauge on the filte..
  • 【PREMIUM QUALITY】Strong Brass Fitting Built for Endurance and Rugged Conditions. Compatible with Pentair Sta-rite 1-1/2-inch multiport valves..
  • 【FITS MODELS】Compatible with Pentair Clean & Clear, Warrior, EasyClean, Triton C-3 pool and spa filter systems,the gauge is not created or sold by Pentair..
  • 【FITS MODELS】Compatible with Pentair Clean & Clear Plus, Predator pool and spa cartridge filters..
  • 【FITS MODELS】Compatible with Pentair EasyClean, FNS Plus, Quad, Warrior pool and spa D.E. filter models FNSP24, FNSP36, FNSP48, FNSP60.
Check Stock

Intex Hose Conversion Adapter B Kit Pair Replacement Part Model Number 25009

  • Designed for connecting 1.5-inch and 38mm pool hoses to plunger valves and other pieces of equipment.
  • Allow filter pumps to be used on 16-inch and smaller above-ground pool.
  • Reduce the large filter pump’s 1.5-inch screw on hoses down to a 1.25-inch clamp on the pool inlet and outlet ports.
  • Required for upgrading from an Intex 530 GPH or 1000 GPH filter pump to an Intex 1500 GPH or larger system.
Check Stock

Anbull 13\ Pool Sand Filter w/ 3/4HP Pool Pump, 5 Way Valve 3648 GPH Pump Flow Rate, Filter up to 10,000GAL Above Ground Swimming Pool

  • 【Sizable Capacity】This sand filter pump for above ground pools is a one-piece 13-inch tank with a capacity of 42LB/19KG of sand that can filter above ground pools up to 3648 GPH..
  • 【5-Way Valve Sand Filter Pump】5-function control valves designed to meet different filtration needs, allowing the pool owner to filter, backwash, rinse, waste, and closed. （A strainer basket is also included for pre-filtering. ）Low noise design makes your work more comfortable and energy-efficient..
  • 【Dependable Performance】The sand filter pump for above ground swimming pool keeps the sand height level to expose water to the maximum sand surface level possible for optimum filtration, consistent performance, and efficient backwashing..
  • 【Simple and Easy to Use】Sand filter pump for above ground swimming pools is 3-prong plug w/ electric cable, matched with the tub by common 1.5'' PVC tubing/discharge hoses for high flow, and it can be quickly start and simple operation, save time and effort..
  • 【Wide Application】This sand filter pump works well in the swimming pool, landscaped pool, SPA pool, support pool and can remove insoluble solids, suspended matter, colloids, particulate matter, fiber hair effectively in water, keep the pool water crystal clear and spark....
Check Stock

Etotel Replacement Sand Filter Pump Parts Repair Set - Compatible with Intex for Intex Sand Filter Pumps,Air Release Valve and O-Rings - 1 Pack(12 Pieces)

  • 【Compatibility】The pool filter pump part compatible with Intex Sand Filter Pump Systems.The sand filter o ring parts repair set replacement for Intex part number 25013..
  • 【The Package Include】This sand filter pump part repair set comes with the following air release valve and O-ring part numbers:1×10460 , 1×11379, 1×10264, 1×11385, 4×11228, 1×11412, 1×11824, 1×11232, 1×11457..
  • 【High Quality】Replacement for intex sand filter o ring made from heavy duty premium materials for durability and performance. Sand pump replacement parts for intex keep the pool filter running smoothly, ensuring that your pool is safe and up and running..
  • 【Advantage】Sand filter o ring for intex can return your filtering system back to peak performance. Save you time and money by replacing your old, damaged or lost air release valves and o-rings with our sand filter pump parts repair kits..
  • 【After-Sales Service】If you have any questions about the installation, quantity, quality and other aspects of the sand filter pump parts repair kit, you can feel free to send us an email and....
Check Stock

Pentair 188592 120GPM 60 Square Foot In Ground Swimming Pool Quad DE Cartridge Fiberglass Reinforced Chemical Resistant Filter Tank

  • IN-GROUND POOL FILTER TANK: Type D.E corrosion-resistant fiberglass in-ground swimming pool filter tank with a flow rate of 120 GPM.
  • compatible with valve models 261173, 263079, 261049, 261050, 261055, and 263064 (valve not included).
  • MAXIMUM FILTER SURFACE AREA: Able to hold 4 large-capacity cartridges, this filter has a maximum filter surface area for more cleaning capacity and cartridge longevity.
  • DURABLE MATERIAL: Fiberglass reinforced polypropylene tank is chemical-resistant and boasts exceptional strength and long life.
  • MAXIMUM FLOW EFFICIENCY: Internal design minimizes flow restrictions requiring minimal pumping power for lower utility costs.
  • manual and continuous air relief valves maintain efficient filtration.
  • CONVENIENT MAINTENACE: Easily removable cartridge units and 1.5-inch drain make maintenance a breeze.
Check Stock

Penn Plax Aquarium Cascade Canister Filter

  • CASCADE CANISTER FILTER FOR FRESHWATER OR MARINE ENVIRONMENTS: the Cascade 1000 (CCF3UL) has 3 media baskets, works at 265 GPH, and is recommended for Aquariums up to 100 gallons. It measures 11.5 x 17 x 10 inches..
  • STATE OF THE ART FEATURES OF THE CASCADE 1000: ♦ flow valves that rotate 360 degrees for easy maneuvering in even the tightest aquarium cabinets ♦ large capacity media baskets allow aquarists to customize to their media needs ♦ push button primer allows for a quick and easy prime of the filter ♦ includes a spray bar, tubing, directional spout for customization, and filter medium..
  • USE ANY COMBINATION OF MEDIA: floss pad for removing particulate matter and a course sponge that provides abundant surface for promoting bacterial growth (to remove ammonia and nitrites) included free with purchase.
  • SEE BELOW FOR DIAGRAM, THE CASCADE 1000 INCLUDES: ♦ Flow rate control cut-off valves ♦ two independent directional 360 degree rotating valve taps ♦ swimming pool – style hose clamps ♦ quick, easy, push button self-primer ♦ extra-large capacity stackable filter medium containers with lift-up handles ♦ floss pad and coarse sponge included, free with each canister filter ♦ easy lift alignment clamps that release vacuum suction ....
Check Stock

6 Pcs Pool Wall Plugs Replacement- Above Ground Swimming Pool Plugs Pool Replacement Parts Filter Pump Strainer Hole Plug Stopper for Most Above Ground Pools Compatible with Intex & Bestway (Blue)

  • 6pcs replacement pool wall plug: We provide 6 pcs blue pool filter pump hole plugs for you, fit for most Intex, Bestway above ground swimming pools, enough quantity for your daily use and replacement..
  • Universal pump strainer hole plug stopper: It is mainly used to replace the filters in the pumps, hold back the water while cleaning pump filter, pump models 530/1000 gph or smaller..
  • Proper size: Our pool wall plug is 2.3in in external diameter and 0.9in in internal diameter, fit for 1.25" diameter pool hoses that do not have plunger valves, please check the size before purchasing..
  • Durable material: These replacement strainer hose hole plugs are made of durable rubber material, with good sealing performance and strong load-bearing capacity, lightweight but sturdy and durable..
  • Easy to use and install: When you cleaning the pump filter, put the hole plug to block the pool wall hole tightly to prevent water from overflowing, and the installation is finished. A must have for your home!.
Check Stock

Intex 26004E Above Ground Swimming Pool Inlet Air Water Jet Replacement Part Kit; Includes Plunger Valve, Strainer Connector, Strainer Grid, etc.

  • INCLUDED WITH REPLACEMENT PART: The replacement part set includes 1 plunger valve with O-ring (10747), 2 strainer connectors for 1.25-inch fitting (11070), 2 strainer grids (11072), and 1 pool inlet air nozzle set (12354).
  • INCLUDED WITH POOL INLET: Pool inlet air nozzle set includes the jet exterior, O-ring, fittings compatible with other set parts.
  • COMPATIABLE WITH: This pool jet replacement part kit works with pool filter pumps with 1,050 to 1,900 gallons per hour flow rates. You can use these pool jet replacement parts with any Intex above-ground pool.
  • INSTALLATION: Plunger valves install in the side of your Intex pool and connect with your Intex hose fitings.
  • WATER CIRCULATION: Better circulate water through your pool with the help of this Intex 26004E Above Ground Swimming Pool Inlet Air Nozzle Replacement Part Set.
Check Stock

SUMMERBUDDY Type B Hose Adapter & Plunger Valve & Pool Hose Holder for Above Ground Swimming Pool, 1.25' to 1.5' Pool Hose Adapter B & On/Off Plunger Valve for Threaded Pumps (2 Packs)

  • 【Multifunctional】This pool hose adapter is used for saltwater system of above ground swimming pool. If your pool inlet/outlet and pipe holder are 1.25" , but you want to install a 1.5" plunger valve, the adapter B will be the perfect solution..
  • 【Waterproof】The rubber ring or band on adapter B and plunger valve tightly with other pool parts to form a sealed space to prevent water leak..
  • 【Convenient】If you want to replace the filter element or upgrade a stronger filter, the plunger valve will help you to control water flow..
  • 【Safe】The pool pipe holder reduce the pressure of the water pipe on the pool wall, thereby reducing damage to the pool..
  • 【Easy installation】The pipe holder is installed between adapter B and inlet or outlet. The big end of pipe holder attach to 1.25" pool inlet or outlet. And the small end of the holder attach to small end of adapter B, then fixed them with clamps. Last, the big end of adapter B attach to the threaded end of plunger valve, simply screw it on.(Contains 2 adapters B, 2 plunger valves, 2 pipe holders).
Check Stock