Reviews Polypropylene Fitting

Value Plastics PIP60-6 Natural Polypropylene Tube Fitting, Classic Series Barbed Press-In Cap, 1/4\ (6.4 mm) Tube ID (Pack of 25)

  • Cap for closing the end of a tube or fitting.
  • Polypropylene for resistance to chemicals, abrasion and corrosion.
  • Classic series barbed fitting has a long barb that provides an extended sealing surface for small diameter tubing.
  • Meets standards set by RoHS for hazardous materials.
Check Stock

Raindrip 646050B Plug, Black

  • Fits into accidentally punched holes or openings where a fitting is removed.
  • Works anywhere along the length of ½ in., 5/8 in., and 0.710 in. supply tubing.
  • Goof Plugs seals holes in supply tubing and stops leaks.
  • Push barbed end into opening by hand or with a fitting inserter tool.
  • Use the 3-in-1 Hole Punch Tool which features a holder with teeth to insert goof plug into hole.
  • Double-sided goof plugs seal holes small or large.
  • No loose pieces - goof plugs come attached together and snap off when ready to use.
  • Goof plugs are made of polypropylene (PP) treated with UV inhibitors to prevent cracking.
Check Stock

Metaland 3/8\ Female 1/2\ Male Brass Water Tank Connector Bulkhead Tank Fitting for Rain Barrels, Aquariums, Tubs, Pools (Pack of 2)

  • MIPT Polypropylene BLACK Bulkhead and Tank Fitting with EPDM Sealing Washer.
  • External thread and nut are left hand threads. Internal thread is FPT..
  • For use with tanks having a wall thickness of 1/16 inch to 1/2 inch.
  • Body and nut are polypropylene. Sealing washer is EPDM..
Check Stock

Scienceware AO-06458-60 Barbed Fittings, Reducing Connector, Clear PP, 13 mm x 9 mm ID, 7 mm x 56 mm x 16 mm (Pack of 12)

  • Sterilization method: ethylene oxide (eto) or gamma.
  • Barb size / tubing id (port 1) (inchshort): 0.5.
Check Stock

Value Plastics L60-6 Natural Polypropylene Tube Fitting, Barbed 90 Degree Elbow, 1/4\ (6.4 mm) Tube ID (Pack of 25)

  • 90-degree elbow with angled barbs for connecting two tubes at an angle.
  • Polypropylene for chemical resistance and dimensional stability.
  • Longer barb extends the sealing surface of the fitting.
  • Expands inside diameter of tubing from 42 to 69 percent for increased seal strength.
Check Stock

Whirl-Pack Write-On Whirl-Pak Collection Bags - Box of 100 - C32520N

  • ...1 fitting. By combining a shut-off valve and Teflon-lined septum, you are able to fill the bag and remove the sample for analysis with one fitting. The stem is used to connect 1/8” ID tubing for filling and emptying the bag. The septum can be used for removing the sample using a syringe. Fittings are available in polypropylene, stainless steel, and Teflon..
  • Guidelines: 1. Store Tedlar bags in a clean area away from potential contamination sources. 2. Tedlar bags are designed for use at atmospheric pressure. Over pressurization (003e2 psi) can cause the bags to burst. 3. Always ensure the bag, fitting, and tubing materials are appropriate for the compounds being sampled. 4. CEL Scientific does not recommend reusing Tedlar bags in most cases..
  • To fill the bag: 1. Connect the appropriate tubing (1/8” ID) from a sampling source to the stem on the side of the fitting. 2. Open the valve by holding the stem and turning the top portion of the fitting counterclockwise one turn. 3. When the bag is full (approx. 90% capacity), close the valve by holding the stem and turning the top portion of the fitting clockwise until it is finger tight..
  • To withdraw the sample using a syringe: 1. Insert the needle into the red septum on the top of the fitting. 2. Withdraw t....
Check Stock

CAROPAK - 275-330 Gallon IBC Tank Adapter - IBC Tote Adapter for Garden Hose - 2 Inch Camlock Fittings to 3/4 Inch Male Garden Hose Thread - IBC Tote Fittings

  • High Quality: This IBC hose adapter is made of polypropylene. Due to the durable material, the IBC fitting does not rust, withstands pressure and is completely safe for drinking water..
  • Leak Prevention: The camlock garden hose adapter features a large rubber seal to prevent water leakage and provide a tighter, more stable connection..
  • Easy to Install: Installing an IBC tote valve requires minimal effort and time without the use of special tools. Our 2 inch hose fitting features aluminum eccentric levers for a better fit..
  • Specifications: This 2 inch camlock fitting fits standard 3/4 inch male garden hose thread and requires no additional parts. The water hose adapter has an outer diameter of 3.23″, an inner diameter of 2.53″..
  • Practical: The IBC valve can be used up to a maximum temperature of 185°F. Unlike brass adapters, cam fitting will not corrode, but is equally strong and able to withstand harsh chemicals and acidic water..
Check Stock

Camco 20751 32" x 30" Washing Machine Drain Pan with PVC Fitting - Protect Your Floor From Washing Machine Leaks

  • Protects your floor from washing machine leaks.
  • Heavyy-duty impact-resistant polypropylene resists shattering.
  • High-strength injection molded design is stronger and thicker.
  • Includes 1-1/2″ / 1″ Drain Fitting, locknut and washer.
  • Pre-formed cut lines make installation easier.
  • Deeper pan depth allows side mounting of drain fitting.
Check Stock

Stanbroil 6 Inch Round Chimney Cleaning Brush with 1\\/4 NPT Fitting for Insulated Chimneys, Stainless Steel or Metal Stove Pipes- Works with Most Chimney Rod Sets

  • 【PACKAGE INCLUDE】: 1 piece polypropylene 6 Inch chimney cleaning brush with galvanized steel stem..
  • 【POLYPROPYLENE BRUSH】: Designed for insulated chimneys, stainless steel or metal stove pipes..
  • 【GALVANIZED STEEL STEM】: Heavy duty twisted-spiral stem for long-lasting use..
  • 【1/4” THREADED FITTING】: 1/4" male pipe threads for the standard 1/4 inch chimney rods..
  • 【FEATURES】: Helps prevent flue fires, and making the sweep more efficiency. Easy to assemble and disassemble, and you can connect chimney rods to extend your reach..
Check Stock

ANPTGHT Plastic Hose Barb Fitting 3/8 Barb X 1/4 NPT Male Thread Adapter Connector Pipe Fittings for Fuel Gas Liquid Air Pack of 5

  • 【Material】 Plastic barb connector, made of high-quality PP（Polypropylene） material.
  • 【Size】3/8" Barb X 1/4" NPT Male Thread.
  • 【Product】Fitting connects to hose on one end and has an NPT male connector on the other..
  • 【Features】Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule..
  • 【Use】Suitable for applications in pharmaceutical, food and beverage, laboratory and others..
Check Stock