Reviews Polyimide Heater

MG Chemicals - POL100-15 Polyimide Tape for 3D Print Beds, High-Temperature, 4' Width x 49' Length

  • Superior quality Polyimide tape for 3D printing of ABS Filaments. Use for multiple prints before having to change the tape..
  • High temperature tape for filaments requiring heated build beds.
  • Apply an ABS Slurry to the tape so your ABS prints stick to the heated bead..
  • Polyimide tape has 1 mil of Polyimide film with 1 mil of silicone adhesive.
Check Stock

eBox Lite Filament Dryer 3D Printer Filament Storage Dry Box Filament Dehydrator Container Keeping Filament Dry with Upgraded Heating Mechanism Silent Circulation Fan and Adjustable Temperature

  • Fast and Even Heating:eBox Lite is equipped with an enhanced heating mechanism using a Polyimide heater with a curved metal plate that has high....
  • Safety Design: Thermal insulation foam is used to reduce heat loss and prevent potential burns, making the dryer safer to use..
  • Quiet Drying: The new eBox Lite equips with an upgraded centrifugal fan that is quieter when it circulates the air for consistent temperature inside....
  • Straightforward Temperature Setting: There are 3 default temperature settings for different filament types. I: 40 °C, for PLA and PLA+ Filament.
  • Wide Filament Compatibility: With a maximum filament capacity measuring ⌀200mm × 73mm(H), the eBox Lite is compatible with filaments with different....
Check Stock

SainSmart Filament Dryer 3D Printer Filament Storage Dry Box Filament Dehydrator Container, with Upgraded Silent Fan, Advanced Heating Mechanism, Up to 24hrs Timer, and Adjustable Temperature

  • [Fast & Even Heating]: SainSmart Filament Dryer Box is equipped with an enhanced heating mechanism. The Polyimide heater inside the box allows for rapid heat up, the curved metal plate enables effective heat transfer and the air circulation fan at the bottom delivers evenly heated filaments..
  • [Reduced Noise Level]: The upgraded SainSmart 3D Printer Filament Dryer equips with an upgraded centrifugal fan that is 20% quieter than its predecessor, providing you a better experience..
  • [Up to 24 Hours Timer]:The maximum drying time of this filament dryer is 24 hours, constantly drying your filament for the best printing results..
  • [Straightforward Temperature Setting]: There are 3 default temperature settings for different filament types. I: 40 °C, for PLA and PLA+ Filament.
  • II: 50°C, for ABS, ABS+ and PETG Filament.
  • III: 55°C, for TPU, PVA, PC and Nylon Filament..
  • [Wide Filament Compatibility]: With a maximum filament capacity measuring ⌀200mm × 73mm(H), the SainSmart Filament Dryer is compatible with filaments with different spool weights and sizes. 500g, 1KG.
Check Stock

High Temp Tape, ELEGOO 4 Pack Polyimide High Temperature Resistant Tape Multi-Sized Value Bundle 1/8’’, 1/4’’, 1/2’’, 1’’ with Silicone Adhesive for Masking, Soldering etc.

  • High Temp Tape, Elegoo 4 Pack Polyimide High Temperature Resistant Tape Multi-Sized Value Bundle 1/8’’, 1/4’’, 1/2’’, 1’’ with Silicone Adhesive for Masking, Soldering,.
  • HN Polyimide polymers film exhibits an excellent balance of physical, chemical, and electrical properties over a wide temperature range.
  • With silicone adhesive for easy release and leaves no residue after peel away.
  • High performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties.
  • Wide range of applications for masking circuit boards, soldering ,electrical insulation and splicing wires.
Check Stock

VOBAGA Coffee Warmer & Mug Warmer for Office/Home Desk Use,20Watt Electric Cup Beverage Warmer Plate With Three Temperature Settings (Up to 150℉/65℃) For Tea,Water,Cocoa,Milk, Soup

  • Use Flat Bottom Steel Mug: This is designed for flat bottom mugs, make sure you have your mug bottom in full contact. Please don’t expect it as a heater or keep your coffee super hot. 60″/152cm cord length. UL, FCC Approved. 3.5″ diameter warming surface..
  • Three-Temperature Settings: This coffee warmer have adjustable temperature designed to slow down the speed of hot beverages, Enjoy something kept just over room temperature, or have it stay a little toastier as you crank up the warmer to 280°F..
  • Metal waterproof heating plate: The coffee mug warmer is spill-proof in case you spilled liquid and avoid the damage and avoid the damage while most coffee warmers in market can not tolerate spills well. Note: Do not pour water onto it..
  • Safe and Stable: Using High Tech Polyimide(pl) Film as mug warm heating surface, it keeps cup warmer heat-resistant and fire-resistant. It also has 4 non-skid feet at the bottom to support your mug and prvent spills.Suitable for tableware: metal, ceramic, enamel, tile, high temperature plastic, glassware etc..
  • Warranty: The coffee cup warmer enjoys 12 months warranty. Purchase with worry free! Now pamper yourself with a mug warmer for your coffee and warmup on your family.
Check Stock

VOBAGA Imitation Wood Grain Coffee Cup & Mug Warmer For Desk,3.5" Diameter Electric Cup Beverage Warmer Plate With 3 Adjustable Temperature (Up to 150℉/65℃) For Tea,Water,Cocoa,Milk, Soup

  • ... toastier as you crank up the warmer to 280°F..
  • Metal waterproof heating plate: The warmer is spill-proof in case you spilled liquid and avoid the damage and avoid the damage while most coffee warmers made with plastic can not tolerate spills well. Note: Do not pour water onto it..
  • Safe and Stable: Using High Tech Polyimide(pl) Film as mug warm heating surface, it keeps cup warmer heat-resistant and fire-resistant. It also has 4 non-skid feet at the bottom to support your mug and prvent spills.Suitable for tableware: metal, ceramic, enamel, tile, high temperature plastic, glassware etc..
  • Warranty: The coffee cup warmer enjoys 12 months warranty. Purchase with worry free! Now pamper yourself with a mug warmer for your coffee and warmup on your family.
Check Stock

High Temp Tape,AIYUNNI(2 inch X 108 FT) Polyimide High Temperature Resistant Tape Silicone Adhesive - for 3D Print Bed,Soldering,Masking etc.

  • ✔High Temp Tape Dimension:50mm x 108 ft x 0.05mm (Width x Length x Thickness)It is easy to cut to any size and length you want..
  • ✔High Temperature Tape:Made of Polyimide film with silicone adhesive.for easy release and leaves no residue after peel away..
  • ✔High Temperature Resistance:They are compatible with a wide temperature range as low as -73°C (-99°F) and as high as 300°C (572°F).Polyimide polymer films provide great insulation and protect the nearby component from excessive heat from the hot air rework..
  • ✔Wide Applications:for Automotive sensor and manifolds,Insulating circuit boards,Etching,Fiber Optics Cable,High temperature powder coating,Semiconductor manufacturing,Wave soldering during circuit board assembly,3D Printing,LED strips,Electronic Repair,Solar industries,frequency conversion power,transformer etc..
  • ✔From insulating circuit boards to high-temperature powder coating, you can use AIYUNNI high temp tape in all your projects that involve harsh heat environment..
Check Stock

High Temp Tape,AIYUNNI (4 inch X 108 FT) Polyimide High Temperature Resistant Tape Silicone Adhesive - for 3D Print Bed,Soldering,Masking etc.

  • ✔High Temp Tape Dimension:100mm x 108 ft x 0.05mm (Width x Length x Thickness)It is easy to cut to any size and length you want..
  • ✔High Temperature Tape:Made of Polyimide film with silicone adhesive.for easy release and leaves no residue after peel away..
  • ✔High Temperature Resistance:They are compatible with a wide temperature range as low as -73°C (-99°F) and as high as 300°C (572°F).Polyimide polymer films provide great insulation and protect the nearby component from excessive heat from the hot air rework..
  • ✔Wide Applications:for Automotive sensor and manifolds,Insulating circuit boards,Etching,Fiber Optics Cable,High temperature powder coating,Semiconductor manufacturing,Wave soldering during circuit board assembly,3D Printing,LED strips,Electronic Repair,Solar industries,frequency conversion power,transformer etc..
  • ✔From insulating circuit boards to high-temperature powder coating, you can use AIYUNNI high temp tape in all your projects that involve harsh heat environment..
Check Stock

CoYlBod Heat Tape,Heat Resistant Tape,Heat Transfer Tape,Thermal Tape,High Temperature Tape, No Residue 1/2 inch（13mm) X 33m Polyimide Tape for Sublimation,Masking,3D Printing,Electric Task, Soldering

  • 【Wide Application】The electric tape is ideal for heat press, T-shirt applications, any with htv or sublimation printing, masking, soldering, electronic repair and other DIY projects. It works well in protecting electronic products, electric motor, painting, packing fixing, printing PCB board,3D Printing, masking circuit boards, electrical insulation and splicing wires..
  • 【Easy to Use】The heat transfer tape is made of polyimide film with high temperature resistant silicone adhesive. With silicone adhesive for easy to release and leaves no residue after peeling away..
  • 【Heat resistance】Maintain high temperature resistance up to 260°C (500°F)..
  • 【Solvent Resistance】The kapton tape will not melt or fade under high heat. HN Polyimide polymers film exhibits an excellent balance of physical, chemical, and electrical properties over a wide temperature range..
  • 【Sincere Pre-Sales and After-Sales Service】We are committed to providing customers with high-quality products and sincere after-sales service. If you have any questions about high temperature tape, please feel free to contact us, you will receive a fast reply within 24 hours..
Check Stock

2 Rolls Heat Tape 50 mm x 108 ft High Temperature Polyimide Tape, 572 Fahrenheit Degree Heat Resisitant Heat Transfer Tape Adhesive Tape for Soldering, Electrical, Masking, 3D Printer Application

  • ...hat you get: you will receive 2 rolls of quality heat resistant tapes in brown color, each roll measures approx. 50 mm/ 2 inch in width and 33 meters/ 108 ft in length, it's long enough to meet your most different needs, can serve you for a long time.
  • Reliable material: the high temperature tapes are made of quality polyimide film, durable and sturdy, which is resistant to UV, high temperature, acids, alkalis, oil, moisture and abrasion, and will not easily leave residue on the surface when tearing them.
  • High temperature: the temperature range of heat resistant tape from long-term temperature -73 degree centigrade (-100 Fahrenheit degree) to 300 degree centigrade (572 Fahrenheit degree) , which can work well in protecting electronic products, electric motor, solder, as well as painting, packing fixing, printing board.
  • Easy to use: this 3d printer tape has nice heat and solvent resistance, and minimal shrinkage after baking, easy to paste and not easy to break while while you are peeling it off, so you can use it with confidence.
  • Wide range of uses: the polyimide adhesive tape can be applied on baking, sublimation insulating circuit boards, automotive sensor and manifolds, fiber optics cable, high temperature coating and semiconductor manufacturing, capac....
Check Stock