Reviews Polyester Resin Used In

Premium Polyester Resin w/Hardener for Laminating Fiberglass mat, biaxle, Cloth (Gallon)

  • Our polyester resin is a Iso blend resin, this is a perfect no-run, no-sag resin for marine repairs and boat construction..
  • Iso resin is more flexible and waterproof then your traditional 100% polyester resin..
  • Good for repairing all boat surfaces. It is mixed with MEKP catalyst to harden..
  • Used By Pros for Building and Repairs Marine Grade Durable Hard Finish Excellent wet out characteristics 35 min gel time.
  • Comes with Hardener and Small Mek Mixing Cup.
Check Stock

Polyester Resin 1 Gallon + MEKP Hardener, Grade A, Low Viscosity Coating for Laminating Fiberglass mat, Biaxle & Cloth for Boats, RV, Car & Truck Exterior Canoe Surfboards, Hard, Non-Tacky Finish

  • ✅ GRADE A – Not your ordinary boatyard resin, this polyester Fiberglass laminating resin is the highest grade you will find – a premium product used in the marine industry and by most manufacturers..
  • ✅ CURES FAST – Use this resin on wood, Fiberglass, or metal without any hassle. Depending on temperature and humidity, it can reach its cured stage in as quick as 4 hours but may take up to 24 hours if not mixed fully or temperature are lower than 72°F, If temperatures are too low it will take even longer..
  • ✅ DRIES TACK-FREE – Manufactured in the USA, this DCPD-type resin dries tack free without the need for wax. The set includes a 2-ounce bottle of MEKP hardener, enough for 1 gallon of resin..
  • ✅ MULTIPLE APPLICATIONS – This polyester fiberglass resin is great for the following applications: marine, general purpose laminating, aero space, FRP (Fiber Reinforced Plastic) parts, auto body, transportation, wood, and much more..
  • ✅ HIGH COMPATIBILITY – Compatible with all types of Fiberglass and coring materials, this polyester laminating resin is perfect for low-cost high quality repairs, new construction parts, and vertical surfaces..
Check Stock

TotalBoat Polyester Laminating Resin - Marine Grade Fiberglass Resin and MEKP Catalyst for Layups and Repairs Quart

  • GENERAL PURPOSE POLYESTER RESIN stays tacky to hold fiberglass cloth and composite fabrics in place during boat building & layups.
  • FAST WET OUT OF FIBERGLASS and other reinforcement fabrics used to create composites and FRP parts for yachts, boats, motorcycles and more.
  • EASY TO USE, NO SANDING: Polyester fiberglass resin is an excellent base coat for laminating applications.
  • INCLUDES MEKP CATALYST: Adjust the amount of MEKP hardener to control gel time.
  • slow gel (20 min +): 1 teaspoon of MEKP per quart of resin.
  • CHOOSE QUART OR GALLON SIZE. Note: Resin and work area should be between 70°F to 95°F.
Check Stock

TotalBoat Polyester Laminating Resin - Marine Grade Fiberglass Resin and MEKP Catalyst for Layups and Repairs Gallon

  • GENERAL PURPOSE POLYESTER RESIN stays tacky to hold fiberglass cloth and composite fabrics in place during boat building & layups.
  • FAST WET OUT OF FIBERGLASS and other reinforcement fabrics used to create composites and FRP parts for yachts, boats, motorcycles and more.
  • EASY TO USE, NO SANDING: Polyester fiberglass resin is an excellent base coat for laminating applications.
  • INCLUDES MEKP CATALYST: Adjust the amount of MEKP hardener to control gel time.
  • slow gel (20 min +): 1 teaspoon of MEKP per quart of resin.
  • CHOOSE QUART OR GALLON SIZE. Note: Resin and work area should be between 70°F to 95°F.
Check Stock

Cutting Board Epoxy Resin Silicone Molds for Serving Tray Platter Concrete Cement Clay, Extra Large 13inch Height

  • Rectangular resin casting molds with hanging holes. Make faux agate cheese board, geode platter, "marble" look fruit holder, plate, XL coaster, jewelry display, wood and resin artwork, decorative home ornaments, wall hanging, acrylic fluid art painting, charcuterie board.
  • For chopping meat, vegetables, fruits, cheese, bread etc. Dimension_13.2x10x0.37inch, 12.1x8.26x0.37inch.
  • Mainly use with modelling clay (air clay, paper clay, resin clay, polyclay, polymer clay, salt clay, metal clay, liquid clay etc.), resin(epoxy resin, rethane resin, uv resin, polyester resin), concrete, cement, gypsum, plaster, hot glue, soap, candle, wax, mix media and more..
  • Durable and transparent soft mold, you can check the buttom when process project. Easy to demold, shiny finish..
  • Food Grade. Food and Non Food material should use separately. Wash and boil before use, especially for food. Easy to use mold very flexible and easy to clean, can be used in oven, dishwasher, refrigerator etc. Can be used within the temperature between -40~220 centigrade / -40~428 fahrenheit.
Check Stock

True Composites Fiberglass Resin Polyester Resin Marine Grade Resin 4 Gallon Kit with MEKP Hardener Polymer Resin Fiberglass Repair Kit Laminating Resin

  • GENERAL PURPOSE POLYESTER RESIN stays tacky to hold fiberglass cloth and composite fabrics in place during boat building & layups.
  • FAST WET OUT OF FIBERGLASS and other reinforcement fabrics used to create composites and FRP parts for yachts, boats, motorcycles and more.
  • EASY TO USE, NO SANDING: Polyester fiberglass resin is an excellent base coat for laminating applications.
  • INCLUDES MEKP CATALYST: Adjust the amount of MEKP hardener to control gel time.
  • slow gel (20 min +): 1 teaspoon of MEKP per quart of resin.
  • CHOOSE QUART OR GALLON SIZE. Note: Resin and work area should be between 70°F to 95°F.
Check Stock

Cheese Board Epoxy Resin Silicone Molds with Handles and Holes for Serving Tray, Platter, Large Rectangle 13.1inch

  • ...ables, food, cups, dishes or bowls etc. Make cutting boards 13.1x5.2x0.37inch, 13.1x3.7x0.35inch.
  • Mainly use with modelling clay (air clay, paper clay, resin clay, polyclay, polymer clay, salt clay, metal clay, liquid clay etc.), resin(epoxy resin, rethane resin, uv resin, polyester resin), concrete, cement, gypsum, plaster, hot glue, soap, candle, wax, mix media and more..
  • Durable and transparent soft mold, you can check the buttom when process project. Easy to demold, shiny finish..
  • Food Grade. Food and Non Food material should use separately. Wash and boil before use, especially for food. Easy to use mold very flexible and easy to clean, can be used in oven, dishwasher, refrigerator etc. Can be used within the temperature between -40~220 centigrade / -40~428 fahrenheit.
Check Stock

FUNSHOWCASE Candle Holder Epoxy Resin Silicone Molds for Candlestick, Tea Light Votive, Jewelry Container, Ashtray, Crsytal

  • Durable and reusable 3D resin casting trays. Make tealight holder, candlestick, jewellery storage box, candy or chocolate bowl, shotglass, ashtray, bead holder, succulent planter, table ornament, polymer clay crafting projects..
  • Glass glazed look tealight holders or candle jar. Add a glamorous glow and elegant look to any table setting..
  • Create a warm atmosphere for votive activity, wedding, proposal, christmas, new year or daily use. Mainly use with modelling clay (air clay, paper clay, resin clay, polyclay, polymer clay, salt clay, metal clay, liquid clay etc.), resin(epoxy resin, rethane resin, polyester resin), concrete, cement, gypsum, plaster, hot glue, soap, candle, wax, mix media etc..
  • Transparent that you can check the bottom when process project. Easy to release, gloss finish.
  • Food Grade. Food and Non Food material should use separately. Wash and boil before use, especially for food. Easy to use, very flexible and easy to clean, can be used in oven, dishwasher, refrigerator etc. Can be used within the temperature between -40~220 centigrade / -40~428 fahrenheit.
Check Stock

FUNSHOWCASE Mandala Tealight Votive Candles Holders Silicone Resin Mold for Candlestick, Jewelry Storage Box, Ashtray, Lamp 5-Count

  • ..., create a warm atmosphere for votive activity, wedding, christmas or daily use. Make a rainy afternoon or lazy weekend a bit more colorful..
  • Mainly use with modelling clay (air clay, paper clay, resin clay, polyclay, polymer clay, salt clay, metal clay, liquid clay etc.), resin(epoxy resin, rethane resin, uv resin, polyester resin), concrete, cement, gypsum, plaster, hot glue, soap, candle, wax, mix media and more. Can also be used with food material such as ice, isomalt etc..
  • Durable and reusable 3D soft mold. Transparent that you can check the buttom when process project. Easy to demold, gloss finish.
  • Food Grade. Food and Non Food material should use separately. Wash and boil before use, especially for food. Easy to use mold very flexible and easy to clean, can be used in oven, dishwasher, refrigerator etc. Can be used within the temperature between -40~220 centigrade / -40~428 fahrenheit.
Check Stock

Mini Sea Creatures Summer Beach Candy Silicone Mold for Sugarcraft Cake Decoration, Fondant Cupcake Topper, UV Resin Epoxy Jewelry Casting , Polymer Clay Crafting Projects 27-cavity Pack of 5

  • For chocolate craft, spray release agent for chocolate, such as no-stick backing spray.
  • For resin craft, add baby oil after resin dried..
  • Use with modelling clay (air clay, paper clay, resin clay, polyclay, polymer clay, salt clay, metal clay, liquid clay etc.), resin(epoxy resin, rethane resin, uv resin, polyester resin), concrete, cement, gypsum, plaster, hot glue, soap, candle, wax, mix media and more. Can also be used with food material such as ice, gum paste, jelly, marzipan, fondant, sugarpaste, melted candy & chocolate etc..
  • Durable and transparent soft mold, you can check the buttom when process project. Easy to demold, shiny finish. Demolding tips: Add baby oil or butter to mold till resin dried, twist it then figurine will pop out!.
  • Food Grade. Food and Non Food material should use separately. Wash and boil before use, especially for food. Easy to use mold very flexible and easy to clean, can be used in oven, dishwasher, refrigerator etc. Tip: Wash in warm soapy water, and they will last for years!.
Check Stock