Reviews Point Speaker

Monoprice Speaker Wall Mounting Bracket White (Max 10 lbs) Set of 2

  • Easily Mount Your Satellite Speakers On Your Wall With This Speaker Wall Mounting Bracket Kit From Monoprice!.
  • These Brackets Are Designed To Mount Small Satellite Speakers With A Single-Bolt, Two-Hole , Or Keyhole Mounting Systems.
  • Each Bracket Can Support A Speaker Weighing Up To About 10 Lbs.
  • Each Bracket Can Be Tilted And Swiveled, So You Can Point Each Speaker To The Proper Angle For The Optimum Audio Experience.
Check Stock

CT Sounds Strato 6.5” 240 Watt 2-Way Weatherproof Component Car Speaker Set

  • Speaker Size: 6.5” 2-way component speaker set, Impedance per speaker: 4 Ohm, Power per set: 120W RMS | 240W MAX.
  • Strato 6 1/2 component speakers take your ears to the future and allow you to experience the tonal quality of the injection-molded cone.
  • 6.5 inch component car speakers are built using an IMPP cone (weatherproof) and NBR surround which create a sound signature to keep your ears happy.
  • Included crossover network with a crossover point of 3.5 kHz will ensure clear highs to the included 19mm silk-dome tweeters.
  • If you want a pair of speakers that elevate your system to the stratosphere then look no further than the strato 6.5” 2-way component speaker set.
Check Stock

Pangea Audio LS300 All Steel Floor Bookshelf Speaker Stands Pair (24 Inch)

  • Super-rigid all-steel construction speaker stand supports a wide range of bookshelf-, monitor- and rear channel-type loudspeakers.
  • Three large diameter steel support columns arranged in a triangular shape are coupled to steel top and bottom plates forming an incredibly rigid platform for enhanced speaker performance.
  • The 6” by 6” steel top plate matches a wide range of speakers.
  • the 10” by 12” heavy gauge steel base plate combined with four adjustable steel cone point spikes provide excellent stability and easy leveling on any surface.
  • One steel column has openings at the top and bottom to hide speaker cables and two columns can be sand- or shot-filled for even better vibration damping.
  • Four soft top pads supplied for speaker isolation.
Check Stock

Reisong A10 EL34 Hi-Fi Audio Stereo Tube Amplifier Single-end Class - A Amp

  • Please pay attention before buying, We received feedback from many buyers, reflecting that Reisong A10 Amp have not enough power. Please confirm that your speaker is a bookshelf speakers with a sensitivity 89db or more. We don't think Reisong A10 work well with a floorstanding Speaker or the low sensitivity speakers..
  • Point to Point hand welding, preferred audiophiles, output transformer switch to the 76x40 higher end output transformer..
  • If there is no sound from the machine after waiting for a few minutes, Please make sure the power is connected properly. And try pressing the Black Circle Button on the back of the machine (for switching between AUX and CD modes).
  • Reisong A10 Amp with protective tube cage..
Check Stock

Pyle Sonos Speaker Stand Pair of Sound Play 1 and 3 Holder - Telescoping Height Adjustable from 26” - 52” Inch High Heavy Duty Three-point Triangle Base w/ Floor Spikes and 9” Square Platform

  • Sonos speaker compatible: Pyle Designed a pair of speaker stand according to the shape, aesthetics and black coat finish Color of the sonos speaker....
  • Height adjustment: It features a telescoping center column that is adjustable ranging from 26''- 52'' Inch high and secure it with a sturdy pin. The....
  • Square platform: The sonos speakers can be easily place at the 9'' Inches square platform with 2mm thick and non-slip pad. It has 90 lbs. Weight....
  • Three-point triangle base: It has Equal 18''x 18'' X 18'' Base plate To support solidity and safety of the sonos speaker. It also has floor spikes....
  • Easy to assemble: Pyle Made sure that these sonos speaker stands comes with necessary hardware for a hassle free assembly and mounting. More....
Check Stock

XMSJSIY HiFi OFC Speaker Cable with Banana Plug to Pin Type Plug, 4mm Banana Plug to 2mm Plug Speaker Jumper Cable for Amplifier Application Subwoofer Mixer -2M (6.56 ft)-2pcs

  • This hifi ofc speaker cable with 4mm banana plug to 2mm pin plug is a bi-directional connection audio equipment cable,can be used to bi-wire two devices with binding posts and banana sockets,transmit audio signals. such as an amplifier with pin plug to a speaker with a banana plug..
  • The hifi ofc speaker cable with 2mm pin plug to banana plug (4pcs),oxygen-free stranded copper wire improve sound clarityand sonic accuracy..
  • There are 2 pack of speaker cable with 4 pin on one end and 4 banana plugs on the other, which is easy to install. you can also tear the cable from the thin point in the middle and divide it into 4 separate cables, each of which is 2 meters (6.56 feet) long..
  • Strong and flexible cable will not kink, and convenient storage,Red brown insulation jacket is a thickness 3mm non-slip PVC boot and cable sheath..
  • Banana plug to pin type plug of ofc high fidelity speaker cable is suitable for high-power speaker equipment,24k gold plated connector for superior signal PVC and can improve the sound quality of speaker equipment..
Check Stock

Pangea Audio LS300 All Steel Bookshelf Speaker Stands Pair (32 Inch)

  • Super-rigid all-steel construction speaker stand rigidly supports a wide range of bookshelf-, monitor- and rear channel-type loudspeakers.
  • Three large diameter steel support columns arranged in a triangular shape are coupled to steel top and bottom plates forming an incredibly rigid platform for enhanced speaker performance.
  • The 6” by 6” steel top plate matches a wide range of speakers.
  • the 10” by 12” heavy gauge steel base plate combined with four adjustable steel cone point spikes provide excellent stability and easy leveling on any surface.
  • One steel column has openings at the top and bottom to hide speaker cables and two columns can be sand- or shot-filled for even better vibration damping.
  • Available now in five heights – the 20” height comes with a 6” by 9” steel top plate for extra large speakers.
Check Stock

Audiophile HiFi Speaker Isolation Feet Spikes, Aluminum Shockproof Turntable Stand Feet, Speaker Floor Protector Mat, Adjustable Subwoofer Vibration Absorber, Non-Slip LP Vinyl Record Player Base Pad.

  • Weight Bearing Capability: (220Lbs / 100Kg) / Set..
  • ❖ High quality aluminium alloy speaker isolation spike with high hardness and density has low harmonic vibration point and high damping, manage the energy of the speaker to reduce vibrations resonating through the supporting surface and internal reflection to eliminate dissonant sound..
  • ❖ Speaker bumper isolation feet can separate audio component from vibration, antiskid rubber absorbing vibration, resulting in tighter and cleaner sounding bass, less buzz in the room, fewer complaint from neighbor in apartment..
  • ❖ Audiophile turntable isolation feet vibration absorbe has high attenuation characteristics which can keep low quantity sense and raise high frequency line feeling and simple sense, ideal for speaker, amplifier, instrument, turntable, CD/DVD player, recorder, DAC etc..
  • ❖ PACKAGE - Aluminum Alloy Shockproof Speaker Vibration Absorber x 4..
  • ❖ SATISFACTION GUARANTEED - 30-Day Money Back & 5-Year Warranty..
Check Stock

VonHaus Black Wall Mount Speaker Brackets x 2 | 7.7lb Weight Capacity | Swivel & Tilt

  • TWO PACK: 2 speaker mounts suitable for home cinema/ satellite style speakers with single threaded insert fittings.
  • SWIVEL & TILT: +/- 70°swivel and +/- 20° tilt mechanism allows adjustment for optimum listening angle and sound direction.
  • UNIVERSAL: fits all single point speakers (with single rear entry fittings).
  • 7lb WEIGHT CAPACITY: accommodates most small satellite speaker types.
  • EASY TO INSTALL: comes complete with easy install kit including screws.
Check Stock

Q Acoustics 3030i Bookshelf Speaker Pair Grey

  • Innovative point-to-point cabinet bracing gives extraordinary rigidity and virtually eliminates distortion.
  • Bigger Bookshelf cabinets fitted with Floorstander driver units. Capable of astonishingly low 46Hz bass response and excellent 88dB sensitivity.
  • Enclosure Type: 2-way reflex, Bass Driver: 165 mm (6.5 in), Tweeter: 22 mm (0.9 in), Frequency Response: 46Hz – 30kHz, Impedance: 6 Ohms, Minimum....
  • You can buy the matching Black or White 3030FSi floor stands to mount 3030i bookshelf speakers.
  • Includes: 2 x 3030i bookshelf speakers, 2 x Speaker Grilles, 2 x Foam Bungs, 1 x User Manual.
Check Stock