Reviews Poe Supporting Device
Goalake 6 Port Gigabit Ethernet Unmanaged PoE+ Switch, 4 Gigabit PoE+ @52W Built-in Power, 1 Gigabit Uplink + 1 Gigabit SFP Slot, 802.3af/at, VLAN Mode, 4kV Lightning Protection, AI Detection
- ...Turn on the VLAN switch) support isolate 4 PoE+ port from each other. It is easy for this 4 port PoE switch to manage and maintain ,Prevent broadcast storms, Prevent data confusion, Wireless networking application data is more stable..
- 【Active poe switch with 802.3af/at compliant】Goalake poe switches support poe devices and non-poe devices, But when connecting passive poe device or non-poe device,the switch can only transmit data and cannot power your device,so the connected device needs to be separately powered. Or you can use it with active poe splitter..
- 【4 gigabit poe switch@52W 】PoE switch with 4 1000M PoE port + 1 1000M Uplink port,1 x 1G SFP,4×PoE ports providing up to 30W per port, total PoE budget 52W.1 gigabit ethernet Uplink Port for connecting NVR and Internet , etc...
- 【4KV Lightning Protection】Goalake PoE switch have professional lightning protection design-up 4KV port and power supply thunder prevents, with two levels of protection design respectively, effectively restrain the power of lightning from cable, which equivalent to give the entire network monitoring system with a security fence..
- 【AI Watchdog function of poe port】When the data or electrical transmission between the poe port and the terminal device is abnormal, t....
Check StockYIDUOYUNCAI 6 Port PoE Switch (4*100Mbps PoE Port+2*100Mbps Uplink Port),78W,802.3af/at,VLAN,Metal Fanless,Unmanaged Plug and Play
- ...ps PoE+ Ports(802.3at/af)&2*10/100Mbps uplink, power budget up to 30W per PoE port and 78W for the whole..
- 【Extend Mode】When Extend Mode is enabled, the transmission distance of POE ports can be extended to 250m at transaction rate of 10M..
- 【Active poe switch with 802.3af/at compliant】Poe switches support poe devices and non-poe devices, But when connecting passive poe device or non-poe device,the switch can only transmit data and cannot power your device,so the connected device needs to be separately powered. Or you can use it with active poe splitter..
- 【AI PD Detection】The poe port will intelligently judge whether the device connected to the port needs power supply. If it is a non-poe device that does not need power supply, the switch will not supply power to these devices and will not damage the device..
- 【Plug and Play】6 Port Unmanaged Network Switch Support automatically detect devices,easy to setup with no software installation or configuration required..
- 【Fanless design】The fanless design makes poe switch work without any noise..
- 【Network cable short-circuit protection mechanism】POE switch is stable and has strong anti-interference ability, protect the fault caused by the short circuit of the network port.Short Circuit, Over C....
Check StockYIDUOYUNCAI 11Port PoE Switch,8 Port 100Mbps PoE+2*1000Mbps Uplink Port and1Gigabit SFP Slot,150W,802.3af/at,Metal Fanless,Unmanaged Plug and Play
- ... 2 1000M Uplink port+ 1 SFP port, 8×PoE ports providing up to 30W per port, total PoE budget 150W, 2 gigabit ethernet Uplink Port for connecting NVR and Internet , etc..the SFP slot can choose the optcial model with 2km,10km,20km,40km...etc..
- 【Active poe switch with 802.3af/at compliant】poe switches support poe devices and non-poe devices, but when connecting passive poe device or non-poe device, the switch can only transmit data and cannot power your device, so the connected device needs to be separately powered. Or you can use it with active poe splitter..
- 【AI PD Detection】The poe port will intelligently judge whether the device connected to the port needs power supply. If it is a non-poe device that does not need power supply, the switch will not supply power to these devices and will not damage the device..
- 【Built-in power supply】The power supply is located in the poe switch body and integrated with the switch. It is simple and light. After connecting to our AC Power Cable, the switch can transmit power to the equipment connected to the switch..
- 【Plug and Play】Easy setup with no software installation or configuration needed.
- 【Network cable short-circuit protection mechanism】POE switch is stable and has strong anti-interference abi....
Check StockPoE Injector Adapter PoE+ Injector 30W 10/100/1000Mbps IEEE 802.3af/at Compliant Up to 100 Meters 325 Feet
- ❤ Converts A Non-PoE Gigabit Port To A Poe+ Gigabit Port And Network A Poe Device Located Up To 100 Meters (328 Ft.).
- ❤ Auto-Sensing Technology Delivers Up To 30w To An 802.3at PoE+ Device With Backwards Compatibility For 802.3af PoE (15.4w) Device.
- ❤ 1 Gigabit Ethernet Port Input and 1 PoE+ Gigabit Ethernet Port Output..
- ❤ Plug & Play, No Configuration Is Needed, Simply Connect A Poe Network Device, Accommodates Most Installations Scenarios..
- ❤ Compact and Cost-effective Gigabit PoE/PoE+ injector, IEEE 802.3af/802.3at Compliant.Please Identify the Seller ThePoEstore, the Quality of Other....
Check StockTRENDnet 12-Port Gigabit PoE+ Smart Surveillance Switch, TPE-3012LS, 8 x Gigabit PoE+ Ports, 2 x Gigabit Ports, 2 x SFP Slots, 110W PoE Budget, Managed Switch, Long Range PoE+ up to 200m (656 ft)
- DEVICE INTERFACE: 8 x Gigabit PoE+ Ports.
- 4-Digit PoE LED display (total power budget, available power, consumption per port).
- SMART SURVEILLANCE MANAGEMENT: These managed ONVIF switches are optimized for the surveillance industry.
- surveillance mode provides a graphical dashboard interface with detailed information about the switch and each connected device..
- LONG RANGE POE+: Long distance PoE+ networking up to 656 ft./200m away at speeds up to 10mbps.
- INTEGRATION FLEXIBILITY: Managed switch features include access control lists, VLAN, IGMP snooping, QoS, RMON, SNMP, and syslog for monitoring and flexible network integration..
- POE DEVICE ALIVE CHECK: Feature that attempts to recover an unresponsive PoE device connected to the switch. If a device(ex. PoE camera) is unresponsive, the switch auto-reboots the PoE port attempting to recover the device.
- POE POWER: Each PoE+ managed ONVIF switch supplies up to 30W of power per port and data over a single Ethernet cable to PoE devices.
- HARDWARE DESIGN: Provides gigabit PoE+ ports, SFP slots for fiber connectivity, and a 1U 19” rackmount design with brackets included.
- SURVEILLANCE MODE: ONVIF switches are optimized for the surveillance industry, provin....
Check StockiCreatin 2-Pack Wall PoE Injector Power Over Ethernet Adapter 802.3af 48V 24W 0.5A for Security IP Cameras IP Phones, 10/100Mbps
- Raspberry Pi 3B+ can work with this poe injector after installed this PoE hat or micro USB PoE Splitter.
- This injector lets you power 802.3af compatible devices, with no additional adapter needed. Just plug the network cable(not included) into your network switch and into the “Data In” port, then plug the cable to your device into the “PoE” port with your existing network cable.
- This Adapter support 10/100/1000Mbps gigabit ethernet connection, RJ45 PoE port using 4,5,7,8 pin as power transfer, Please do not connect any device that does not support the “PoE” port, this will damage your device.
- This is an 802.3af compatible device, but it does NOT include the 802.3af/802.3at compliant detection feature. It supplies power NO MATTER WHAT, so don’t plug the “PoE” side into anything that isn’t ready for it.
- Compatible all 802.3af PoE power device as IP Phone, IP camera, Gateway , Switch, or More…...
Check StockPoE Ethernet Power Supply 4 Port POE DC 12V-48V Power Adapter Injector for IP Camera 802.3af/802.3at Device
- Made of plastic material, sturdy and durable to use. Conform to international safety product standards and is safe to use..
- This PoE injector is compatible with IEEE802.3af/at network devices. Apply for IEEE802.3af/at standard POE powered devices.
- This Non standard passive PoE injector is a simple and convenient equipment for PoE or Non PoE devices via an Ethernet cable.
- This device does not have auto detection function and directly supply power to the network devices by force as soon as you connect them, powered device or poe splitter must conform to standard IEEE 802.3af/at, the same time your powered device must support poe pin 4/5(+), 7/8(-) midspan..
- Please select according your device power consumption, in order to ensure stable running, the total power consumption must be lower than the total power supply.Tip: the power voltage should not be over DC48V..
Check StockCudy 8 Port Gigabit PoE Switch, 120 Watts PoE Budget, 8 10/100/1000Mbps PoE+ Ports, 2 Gigabit Uplink Ports , 802.3at, 802.3af, 1/2 (+), 3/6 (-), Fanless, Plug and Play, GS1010PE
- 120 watts reliable 8 ports gigabit PoE+ switch. GS1010PE contains 10 gigabit RJ45 ports, #1~#8 port support PoE functions which could offer 120 watts total PoE budget, while port #9~#10 port are just uplink ethernet ports only transfer data..
- 8 Gigabit PoE+ ports Ideal for small installations of 8 PoE or PoE+ devices (IP Phone, Wired surveillance camera, Wireless Access Point). 2 Gigabit uplink ports are suitable for connecting to the Internet and NVR respectively, which is very suitable for video surveillance and WiFi access applications..
- Compatible with any IEEE802.3af PoE and IEEE802.3at PoE+ device. Auto-sensing technology delivers up to 30W to an 802.3at PoE+ (30 watts) device with backwards compatibility for 802.3af PoE (15.4 watts) devices. Not support any passive (non-standard) PoE devices..
- Watchdog function will detect the status of the powered device in real time, once an abnormality is detected, the switch will actively reset the problem port and restore power..
- Plug and play, simple set up with no software or configuration needed. Built in power supply accommodate for most installation scenarios..
Check StockTRENDnet Powerline 500 AV Nano Adapter Kit, Includes 2 x TPL-406E Adapters, Cross Compatible With Powerline 600-500-200, Windows 10, 8.1, 8, 7, Vista, XP, Plug & Play Install, White, TPL-406E2K
- GIGABIT PORTS: 1 x Gigabit Ethernet port and 1 x PoE+ Gigabit Ethernet port. Integrated power supply..
- PoE POWER SUPPLY: This gigabit PoE+ injector supplies a PoE device with PoE (15.4W) or PoE+ (30W) power..
- INSTALLATION FLEXIBILITY: This PoE+ injector has a wall-mountable design that accommodates most installations scenarios..
- GIGABIT SPEEDS: Full Duplex 2Gbps Ethernet speeds with this PoE+ injector..
- PoE DISTANCE: This Gigabit PoE Injector provides a PoE+ network connection up to 100 meters (328 ft.).
- AUTO SENSING TECHNOLOGY: Auto-sensing technology delivers up to 30W to an 802.3at PoE+ device with backwards compatibility for 802.3af PoE (15.4W) devices..
Check StockLINOVISION Industrial 8-Port Full Gigabit Solar POE Switch with DC12V/DC24V to DC48V Voltage Booster, IEEE802.3at with Total POE Budget 240W, POE Power Supply for Solar Power/RV Truck/VoIP Systems
- DC12V ~ DC48V POE VOLTAGE BOOSTER - Supply standard IEEE802.3af/at POE power with DC12V/DC18V/DC24V/DC36V/DC48V input.
- 8-PORT FULL GIGABIT POE SWITCH - Providing 8*10/100/1000Base-T Ethernet PoE ports and 2*1000Base-X SFP slots (Fiber module is not included). Each POE ports are compliant to IEEE802.3af/at standard. It supports one-key fast ring fiber network and broadcast storms protection (BSP).
- INDUSTRIAL DESIGN FOR HARSH ENVIRONMENT - Fanless design and wide working temperature (-40℃ ~ 75℃ or -40 ℉ ~167 ℉).
- POE WATCHDOG - Realtime monitoring POE load device's status and will automatically reboot POE port when the connected device is not active. It proivdes non-stop running of POE device, like security cameras, IP speakers and IP phones.
- TOTAL 240W POE BUDGET - Up to 30W per POE port, and total 240W POE budget (DC48V input), or 120W (DC24V input), or 80W (DC12V input).
- NON-STOP POE SUPPLY WITH DUAL POWER INPUT - Support 2 channel DC12V-48V redundant power inputs and auto failover, ensure high reliability networking system.
- APPLICATION - For solar power system, vehicle, RV, VoIP IP phone system, robust fiber ring network.
Check Stock