Reviews Poe Splitter Cable

PoE Texas 802.3af Power Over Ethernet PoE Splitter with 5 Volts 10 Watts Output - for 5V Non-PoE Security Camera and Devices Like Foscam Sonoff Tablet USB Dropcam Raspberry Pi and Others

  • 802.3af Power over Ethernet PoE Splitter / Converter for 5 volt non-PoE devices. Extend power up to 328 feet away from a PoE switch. Features....
  • 5v 10w PoE splitter compatible with non-PoE Security Cameras, Tablets, Raspberry Pi, Smart Home Devices, Foscam, Dropcam, Sonoff PTZ cam. The 1.35mm x....
  • This Power over Ethernet splitter converts and 'splits' 44-56v PoE into 5 volts, 10 watts of power on its DC barrel with divided 10/100/1000 gigabit....
  • Requires an IEEE 802.3af PoE switch or 802.3af PoE Injector (sold separately). Functions as a PoE splitter for 5v devices while delivering lightning....
  • All PoE Texas products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call....
Check Stock

YIDUOYUNCAI 11Port PoE Switch,8 Port 100Mbps PoE+2*1000Mbps Uplink Port and1Gigabit SFP Slot,150W,802.3af/at,Metal Fanless,Unmanaged Plug and Play

  • 【Active poe switch with 802.3af/at compliant】poe switches support poe devices and non-poe devices, but when connecting passive poe device or non-poe device, the switch can only transmit data and cannot power your device, so the connected device needs to be separately powered. Or you can use it with active poe splitter..
  • 【AI PD Detection】The poe port will intelligently judge whether the device connected to the port needs power supply. If it is a non-poe device that does not need power supply, the switch will not supply power to these devices and will not damage the device..
  • 【Built-in power supply】The power supply is located in the poe switch body and integrated with the switch. It is simple and light. After connecting to our AC Power Cable, the switch can transmit power to the equipment connected to the switch..
  • 【Plug and Play】Easy setup with no software installation or configuration needed.
  • 【Network cable short-circuit protection mechanism】POE switch is stable and has strong anti-interference ability, protect the fault caused by the short circuit of the network port.Short Circuit, Over Current and Over Voltage Protection..
  • 【Fanless design】The fanless design makes poe switch work without any noise..
Check Stock

Goalake 6 Port Gigabit Ethernet Unmanaged PoE+ Switch, 4 Gigabit PoE+ @52W Built-in Power, 1 Gigabit Uplink + 1 Gigabit SFP Slot, 802.3af/at, VLAN Mode, 4kV Lightning Protection, AI Detection

  • ...ctive poe switch with 802.3af/at compliant】Goalake poe switches support poe devices and non-poe devices, But when connecting passive poe device or non-poe device,the switch can only transmit data and cannot power your device,so the connected device needs to be separately powered. Or you can use it with active poe splitter..
  • 【4 gigabit poe switch@52W 】PoE switch with 4 1000M PoE port + 1 1000M Uplink port,1 x 1G SFP,4×PoE ports providing up to 30W per port, total PoE budget 52W.1 gigabit ethernet Uplink Port for connecting NVR and Internet , etc...
  • 【4KV Lightning Protection】Goalake PoE switch have professional lightning protection design-up 4KV port and power supply thunder prevents, with two levels of protection design respectively, effectively restrain the power of lightning from cable, which equivalent to give the entire network monitoring system with a security fence..
  • 【AI Watchdog function of poe port】When the data or electrical transmission between the poe port and the terminal device is abnormal, the corresponding poe port of the device will automatically detect the problem and restart the connection..
  • 【AI PD Detection】The poe port will intelligently judge whether the device connected to the port needs power supply. If it is a no....
Check Stock

8 Port PoE Injector All in One DC12V-48V 8 Interfaces Passive Adapter Power Over Ethernet Module Injector

  • [HIGH QUALITY ]---It does not have auto detection function and directly supply power to the network devices by force as soon as you connect them，all products are rigorously certified.
  • [ DURABLE QUALITY]---Apply for IEEE802.3af/at standard POE powered devices other brands IP cameras, or being equipped together with IEEE802.3af/802.3at standard poe splitter for non POE devices. durable quality.
  • [MATERIALS]---With high quality materials,This Non standard passive injector is a simple and convenient equipment for PoE or Non PoE devices via an Ethernet cable..
  • [SAFE]---Conform to international safety product standards and safe,Suitable for widely used.
  • [STABLE]---Made of plastic material, sturdy and durable to use.the performance is stable and reliable.
Check Stock

PoE Ethernet Power Supply 4 Port POE DC 12V-48V Power Adapter Injector for IP Camera 802.3af/802.3at Device

  • Made of plastic material, sturdy and durable to use. Conform to international safety product standards and is safe to use..
  • This PoE injector is compatible with IEEE802.3af/at network devices. Apply for IEEE802.3af/at standard POE powered devices.
  • This Non standard passive PoE injector is a simple and convenient equipment for PoE or Non PoE devices via an Ethernet cable.
  • This device does not have auto detection function and directly supply power to the network devices by force as soon as you connect them, powered device or poe splitter must conform to standard IEEE 802.3af/at, the same time your powered device must support poe pin 4/5(+), 7/8(-) midspan..
  • Please select according your device power consumption, in order to ensure stable running, the total power consumption must be lower than the total power supply.Tip: the power voltage should not be over DC48V..
Check Stock

YIDUOYUNCAI 6 Port PoE Switch (4*100Mbps PoE Port+2*100Mbps Uplink Port),78W,802.3af/at,VLAN,Metal Fanless,Unmanaged Plug and Play

  • 【Active poe switch with 802.3af/at compliant】Poe switches support poe devices and non-poe devices, But when connecting passive poe device or non-poe device,the switch can only transmit data and cannot power your device,so the connected device needs to be separately powered. Or you can use it with active poe splitter..
  • 【AI PD Detection】The poe port will intelligently judge whether the device connected to the port needs power supply. If it is a non-poe device that does not need power supply, the switch will not supply power to these devices and will not damage the device..
  • 【Plug and Play】6 Port Unmanaged Network Switch Support automatically detect devices,easy to setup with no software installation or configuration required..
  • 【Fanless design】The fanless design makes poe switch work without any noise..
  • 【Network cable short-circuit protection mechanism】POE switch is stable and has strong anti-interference ability, protect the fault caused by the short circuit of the network port.Short Circuit, Over Current and Over Voltage Protection..
Check Stock

ANVISION 2-Pack Active 12V PoE Splitter Adapter Plug 5.5mm x 2.5mm IEEE 802.3af Compliant 10/100Mbps for IP Camera AP Voip Phone and More

  • Input Voltage: DC 44-56V from poe switch or poe injector.
  • Output Power: DC 12V 15.4W Max., Data Rate: 10/100Mbps.
  • Full IEEE 802.3af compliant, DC Jack: 5.5mm x 2.5mm, output cable length: 200mm.
  • Works with IP camera, Voip phone, AP and other 12V Non-PoE devices.
  • 2-Years warranty and unlimited technical support, Package content: 2x PoE splitter.
Check Stock

2Pack RJ45 Ethernet Splitter Cable Network Adapter 1 Male to 2 Female, Suitable Super Cat5, Cat5e, Cat6, Cat7 Connector LAN Ethernet Cables Internet Adapter, Black

  • 【Ethernet 1 to 2 Splitter Cable Multi-Functions】You can easily convert the RJ45 connection to two RJ45 sockets, allowing two computers to share high-speed DSL, cable modem and Ethernet ports without the need for a router..
  • 【Widely Compatible】Ethernet Splitter 1 2 Suitable for RJ45 device interface, Compatible with Cat7/6/5/5e, for ADSL, Hubs, Switch, TV, Set-top Box, Router, POE Camera, Computer..
  • 【Durable and Good Material】a 2mm thick PCB board is embedded in the conductive circuit to avoid damage to the conductor and leakage. Ensure a longer service life..
  • 【Lossless anti-interference】The eight-core pure copper gold-plated pin and Crystal protective cover, 100m stable transmission, metal shielding, non-interference and lossless anti-interference..
  • 【Recautions for use】RJ45 Ethernet Splitter does not support two devices to surf the Internet at the same time! Only one device can be connected to the Internet at a time..
Check Stock

XW3 iCamera 2 1000 Camera Pairing ADT Cox TWC xfinity Charter Y Cable Cord

  • PoE injector and splitter kit with 5.5mm x 2.1 mm DC jack / plug.
  • Transforms Non PoE devices to PoE enabled.
  • Use with IP security camera, wireless access point and other devices.
Check Stock

XM1000pro

  • 【PoE & IP OVER COAX CONVERTER】LINOVISION’s POE IP Over Coax converter can be used to upgrade analog system to IP surveillance system while using existing coaxial cable. Compatible with RG59, RG6 cables. Supports POE standards 802.3af (PoE) and 802.3at (PoE+). EOC Receiver should be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices.
  • 【LONG REACH POE TRANSMISSION】Up to 100Mbps in 300m (1000ft) RG59 cable transmission, max 1000m (3000ft) distance in 10Mbps, working with CCA/CCU RG59/RG6 cable. Support POE power transmission with load capacity 11W over 300m (1000ft) transmission, working with POE IP camera, VoIP phone, POE WiFi AP.
  • 【INDUSTRIAL DESIGN WITH BUILT-IN HEAT SINK】Industrial design, with built-in heat sink, ensure super reliability and hassle free transmission. Indoor use ONLY. Plug-and-play, configuration free, makes installation simplest. Small design (3.1"x2.0"x0.9") and light weight.
  • 【POINT TO POINT CONNECTION ONLY】Act as MoCA (Multimedia over Coax) in point-to-point connection, transmit video/audio/data/control signal over coaxial cable.
  • 【WORRY FREE】1 year warranty, US local technical support + Global after-hour support..
Check Stock