Reviews Poe Splitter 2 Ethernet

YIDUOYUNCAI 11Port PoE Switch,8 Port 100Mbps PoE+2*1000Mbps Uplink Port and1Gigabit SFP Slot,150W,802.3af/at,Metal Fanless,Unmanaged Plug and Play

  • 【Active poe switch with 802.3af/at compliant】poe switches support poe devices and non-poe devices, but when connecting passive poe device or non-poe device, the switch can only transmit data and cannot power your device, so the connected device needs to be separately powered. Or you can use it with active poe splitter..
  • 【AI PD Detection】The poe port will intelligently judge whether the device connected to the port needs power supply. If it is a non-poe device that does not need power supply, the switch will not supply power to these devices and will not damage the device..
  • 【Built-in power supply】The power supply is located in the poe switch body and integrated with the switch. It is simple and light. After connecting to our AC Power Cable, the switch can transmit power to the equipment connected to the switch..
  • 【Plug and Play】Easy setup with no software installation or configuration needed.
  • 【Network cable short-circuit protection mechanism】POE switch is stable and has strong anti-interference ability, protect the fault caused by the short circuit of the network port.Short Circuit, Over Current and Over Voltage Protection..
  • 【Fanless design】The fanless design makes poe switch work without any noise..
Check Stock

5 PACK Filter, MoCA

  • The products include the following items: 2-Way Coax Cable Splitter 5-2300MHz Coax POE Filter.
  • 2 Way Coax Cable Splitter5-23 00 MHz (2.4GHz) RF bi-directional digital coax/coaxial cable splitter for CATV, satellite and MoCA configurations ..
  • 2 Way Coax Cable SplitterInternal circuit board for better reliability/durability.Low signal loss of 3.5db on each output port improving performance and speeds..
  • POE Filter Bandstop provides a typical 35-45dB of rejection in the MoCA 1125-1525Mhz band. IEEE 6KV A3 surge survivablity is provide for additional network protection..
  • POE FilterDevice's technology is recommend for TiVO Whole House DVR applications.Signal loss in the Cable TV ops band of 5-1002MHz is 1.5dB or less.
Check Stock

8 Port PoE Injector All in One DC12V-48V 8 Interfaces Passive Adapter Power Over Ethernet Module Injector

  • [HIGH QUALITY ]---It does not have auto detection function and directly supply power to the network devices by force as soon as you connect them，all products are rigorously certified.
  • [ DURABLE QUALITY]---Apply for IEEE802.3af/at standard POE powered devices other brands IP cameras, or being equipped together with IEEE802.3af/802.3at standard poe splitter for non POE devices. durable quality.
  • [MATERIALS]---With high quality materials,This Non standard passive injector is a simple and convenient equipment for PoE or Non PoE devices via an Ethernet cable..
  • [SAFE]---Conform to international safety product standards and safe,Suitable for widely used.
  • [STABLE]---Made of plastic material, sturdy and durable to use.the performance is stable and reliable.
Check Stock

PoE Ethernet Power Supply 4 Port POE DC 12V-48V Power Adapter Injector for IP Camera 802.3af/802.3at Device

  • Made of plastic material, sturdy and durable to use. Conform to international safety product standards and is safe to use..
  • This PoE injector is compatible with IEEE802.3af/at network devices. Apply for IEEE802.3af/at standard POE powered devices.
  • This Non standard passive PoE injector is a simple and convenient equipment for PoE or Non PoE devices via an Ethernet cable.
  • This device does not have auto detection function and directly supply power to the network devices by force as soon as you connect them, powered device or poe splitter must conform to standard IEEE 802.3af/at, the same time your powered device must support poe pin 4/5(+), 7/8(-) midspan..
  • Please select according your device power consumption, in order to ensure stable running, the total power consumption must be lower than the total power supply.Tip: the power voltage should not be over DC48V..
Check Stock

iCreatin 2-Pack Wall PoE Injector Power Over Ethernet Adapter 802.3af 48V 24W 0.5A for Security IP Cameras IP Phones, 10/100Mbps

  • Raspberry Pi 3B+ can work with this poe injector after installed this PoE hat or micro USB PoE Splitter.
  • This injector lets you power 802.3af compatible devices, with no additional adapter needed. Just plug the network cable(not included) into your network switch and into the “Data In” port, then plug the cable to your device into the “PoE” port with your existing network cable.
  • This Adapter support 10/100/1000Mbps gigabit ethernet connection, RJ45 PoE port using 4,5,7,8 pin as power transfer, Please do not connect any device that does not support the “PoE” port, this will damage your device.
  • This is an 802.3af compatible device, but it does NOT include the 802.3af/802.3at compliant detection feature. It supplies power NO MATTER WHAT, so don’t plug the “PoE” side into anything that isn’t ready for it.
  • Compatible all 802.3af PoE power device as IP Phone, IP camera, Gateway , Switch, or More…...
Check Stock

TRENDnet 6-Port Fast Ethernet PoE+ Switch, 4 x Fast Ethernet PoE Ports, 2 x Fast Ethernet Ports, 60W PoE Budget, 1.2 Gbps Switch Capacity, Metal, Lifetime Protection, Black, TPE-S50

  • ETHERNET PORT INTERFACE 4 x Fast Ethernet PoE+ ports and 2 x Fast Ethernet ports.
  • POE POWER BUDGET & SWITCH CAPACITY: This PoE+ switch supports both PoE (802.3af) and PoE+ (802.3at) devices with a 60 W PoE power budget that delivers data and power over existing Ethernet cables to Power over Ethernet (PoE) devices such as access points, VoIP phones, and IP Cameras. The 6-port fast Ethernet PoE+ network switch provides 1.2 Gbps switching capacity to support edge network installations..
  • COMPACT FANLESS DESIGN With a compact and lightweight rugged metal housing design this desktop switch is well-suited for desktop installations Its fanless design is ideal for quiet environments that require silent operation.
  • DATA TRANSFER RATE Ethernet 10 Mbps (half duplex) 20 Mbps (full duplex) Fast Ethernet 100 Mbps (half duplex) 200 Mbps (full duplex).
  • OPERATING TEMPERATURE This 6-port fast Ethernet PoE+ network switch is rated with an operating temperature range of 0 – 40 °C (32 - 104 °F).
  • TRENDnet LIFETIME PROTECTION: All metal TRENDnet switches are backed by our lifetime TRENDnet Manufacturer Protection. Renewed or refurbished products come with a 90 day Amazon Renewed Guarantee..
Check Stock

LINOVISION Mini 2 Port POE Extender IEEE 802.3af/at POE Repeater Up to 1000ft Power Over Ethernet Over Cat5/6 Cable, POE Splitter to 2 POE Devices Like IP Cameras, IP Phone, Wireless AP

  • 【2-PORT POE SPLITTER】This 2-port POE extender is designed to supply POE power to two POE devices through one Cat5E/6 cable, and no power adapter is required. It is powered by 48V or 53V PoE Switch/POE NVR/PoE Injector/Mid-span. With this POE splitter, users can easily add extra POE device or non-POE device to existing cable without running a new network cable..
  • 【UP TO 1,000FT POE + DATA EXTENTION】Extra 330ft POE+Data transmission will be extended with one Linovision POE Extender. And it supports two levels cascade deployment, therefore total 1,000ft POE + Data transmission is provided. (The 2nd POE Extender’s POE Input should be connected to the 1st POE Extender’s Out port, not Camera port).
  • 【COMPLIANT TO IEEE802.3AF/AT STANDARD】This POE Extender works with all standard IEEE802.3af/at POE Switches/POE injectors/POE NVRs. And the POE Outputs supply power to standard POE devices (don't support 24V POE Devices) , like POE IP camera/IP phone/IP speaker. Noted: The CAMERA Port supports max 8W power consumption and the OUT Port supports max 15W. The max bandwidth is 100Mbps. As the distance increases, the power and the bandwidth will decrease..
  • 【EASY TO CONFIGURE IP CAMERA ON SITE】By interting this PoE-Extender02 to an existing PoE cable, ....
Check Stock

Duttek RJ45 Splitter Ethernet , RJ45 Ethernet Port Splitter, RJ45 1 Male to 2 Female Adapter for Ethernet Cat 5/CAT 6 LAN Ethernet Cable Extender Surf Online at The Same time 50cm/1.64 FT (1 Pair)

  • Splitter Ethernet network adapter divide original embedded Ethernet cables (8pins) into two groups (1236/4578). Two groups respectively transmit data with purely physical connection which don't have the function of the assign IP addresses..
  • RJ45 ethernet to 2 female allow increase the number of RJ45 network splitter on the basis of the one RJ45 outlet, ethernet port splitter cable support two devices connect network at the same time by using this new upgrade version, you can use your computer in two rooms..
  • Ethernet splitter 1 to 2 convert and increase your Ethernet connections from 1 male plug to 2 female sockets, Convert a single RJ45 outlet jack port to two RJ45 sockets easily,The speed of each cable groups (1 and 2) can only reach 100 megabytes.And the signal transmission of two cable groups are not interfered with each other..
  • Ethernet cable splitter use gold pated needle core, metal shield, fixed RJ45 interface, shielding the outside world EML, RFI Such as electromagnetic interference, transmission signal is more stable to ensure that the signal transmission..
Check Stock

Cudy FS1006P 6-Port 10/100M PoE Switch 60W, 4 PoE Ports, CCTV Mode (Transmit Distance to 250m at 10Mbps), PD Detection,Fan-Less, Steel Case, Desktop and Wall-Mount, 802.3at / 802.3af

  • 6 Ethernet ports, 4 port PoE+ with 60W total power budget, 2 port uplink ideal for connecting NVR and Internet. Compact Design with Internal Power Supply.
  • Power over Ethernet with 802.3at and 802.3af compliant. Power-Over-Ethernet (PoE) and PoE+ options available for powering IP Security Cameras, VoIP phones, wireless access points, and other PoE-powered devices..
  • CCTV function support remote power and data feeding up to 250m long distance, which is easy to expand network via ethernet cable to somewhere without power supply but need fix device such as IP Cameras..
  • With PD detect function, this PoE switch support auto detect power device, will not burned non-standard PoE device or normal PoE switch. Pin assignment: alternative 1/2 (+), 3/6 (-)..
  • High Quality chipset inside: Use high quality POE chip to ensure stable operation of the product.Plug & play: Mode A alternative 1/2 (+), 3/6 (-) power supply, simple set up with no software or configuration needed..
Check Stock

EnGenius Neutron IEEE 802.11n Wireless LAN Controller - 48 x Network (RJ-45) - PoE Ports - Rack-mountable

  • 16 Gigabit and 8 2.5-Gigabit PoE Ethernet Ports.
  • 802.3 at/af PoE+ Ready on All Ports with 410W PoE budget.
  • 4 10-Gigabit Dual-Speed SFP+ (fiber) uplink ports.
  • Real-Time System Metrics, Deep-Dive Analytics and Remote Configurations.
  • Quick-Scan Device Register, Remote Monitoring and Troubleshooting.
  • Continuous PoE Power – Steady supply of PoE power for camera during switch upgrades.
  • 802.3ad Link Aggregation (LACP) Supports Traffic Load Balancing.
  • Energy Efficient Ethernet (802.3az) improves energy savings when used with other compliant devices.
Check Stock