Reviews Poe Pse Module

StarTech.com 4 Port Gigabit PoE (Power over Ethernet) Card - PCIe Network Card - PoE / PoE+ Up to 25W Per Port - PCIe NIC - Gigabit Ethernet Card (ST4000PEXPSE)

  • FULLY COMPLIANT: This 4 port Gigabit PoE card is fully compliant with IEEE 802.3at (Type 1 & 2) Power over Ethernet (PoE) standards.
  • PSE SUPPORT: This PCIe network card features a Power Sourcing Equipment (PSE) endpoint that supports up to 48V, 25.5 watts max. output per port.
  • POWER YOUR PoE DEVICES: Provide connectivity and power to compatible PoE devices, including cameras and wireless access points using this PCIe PoE Ethernet card.
  • ULTIMATE SUPPORT: The Gigabit NIC supports IEEE 802.3at, 802.3az Draft 2.2 Energy-Efficient Ethernet (EEE), 802.1q VLAN tagging, 802.1p Layer 2 Priority Encoding and 802.3x Full Duplex Flow Control.
Check Stock

UCTRONICS PoE hat for Raspberry pi

  • For Pi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the raspberry pi 3 model B+ and raspberry pi 4 model B (not included)..
  • Intelligent Temperature Control: the 25mm×25mm brushless cooling fan will turn automatically when the temperature of the processor is high..
  • Smaller Size: Save more space than the official HAT, can be held in the most case for Raspberry Pi.We recently released a new version of PoE HAT with fan, which can support 48V non-standard switches, please search B09MCGFX12.
  • NOTE: The network switch or power sourcing equipment (PSE) is needed to supply the PoE signal, and they must be compliant with the IEEE 802.3af or 802.3at PoE standard, particularly section 33.4.1 with regards to PSE electrical isolation of the leads. For the non-isolated switch, such as some Ubiquiti switches can not provide proper isolation, they can only work with CAT 5E and CAT 6E network cable..
Check Stock

StarTech.com 1 Port 2.5Gbps PoE Network Card, PCIe Ethernet Card w/RJ45, 30W 802.3at PoE NIC for Desktops/Servers, Network PoE LAN Adapter w/Low-Profile Bracket, NBaseT, Windows/Linux (ST1000PEXPSE)

  • 2.5G NETWORK CARD WITH POE: This PCI Express x1 Network Card enables 2.5Gbps network speeds and supplies (PSE) 30W PoE over a single CAT5e (or later) cable - Leverage existing copper cabling without the use of a Power over Ethernet (PoE) injector.
  • POE+ COMPLIANT: Card provides up to 30W PSE and 25.5W PD at 48V DC to a connected device - Supports IEEE 802.3af (PoE) and 802.3at (PoE+) to power remote devices such as access points, RFID readers, and IP cameras.
  • MULTI-GIGABIT CONNECTIVITY: The Network PoE Card features 2.5GBASE-T (802.3bz) and will auto negotiate to the connected device's highest possible speed - The PCIe Network Card supports Wake-on-LAN and RealWoW for remote wake up of the host computer.
  • TECH SPECS: 2.5Gbps/1Gbps/100Mbps/10Mbps - NBASE-T - 1x RJ45 Port - Realtek RTL8125B - IEEE 802.3af/at - 802.3az EEE - PCIe 2.1 x1 - SATA & SP4 Power Connectors - Link/PoE LED Indicators - 16K Jumbo Frame - VLAN - PXE Boot - Full and Low-Profile Brackets.
  • VERSATILE POE NETWORK CARD: The PCIe Ethernet Adapter supports Windows and Linux - Variable speed options and includes a low-profile bracket for Small Form Factor (SFF) systems ensures compatibility of the PoE NIC with current and legacy devices.
Check Stock

NOYAFA Advanced Network Cable Tester With PoE& NCV & Lamp For CAT5e/CAT6/CAT6a, Multifunction Wire Tracker Cable Tester For Tracker Underground Telephone Line Finder Home Repair

  • Main Function : Detecting PoE voltage, current, power, PSE standards Power supply modes, Verify RJ45 cables.
  • 1. Three scan modes selectable: AC filter mode/ Analog mode/ PoE mode.
  • 2. Detect AC voltage presence (50V-1000V). Test physical status for STP, UTP lan cable..
  • 3. Measure cable length accurately , the range is 120m..
  • 4. Hub blink for locating network port by the flashing port light on Hub / Switch. Available to 10M/100M/1000M Hub/ switch..
  • 5. PoE testing : identify which pins are providing power and detect how much voltage, identify which the type of PSE (at/af standard).
Check Stock

Cisco SG250-08HP Smart Switch | 8 Gigabit Ethernet GbE Ports | 45W PoE | Limited Lifetime Protection SG250-08HP-K9-NA

  • ETHERNET PORT CONFIGURATION: 8-port 10/100/1000.
  • POWER OVER ETHERNET: 8 PoE ports with 45W total power budget, PoE, PoE plus, PoE PD/PSE port.
  • CONFIGURATION AND CONTROL: Easy-to-use on-box WebUI, CLI offers basic plus capabilities, SNMP, Cisco FindIT Network Manager, PnP, auto-discovery,....
  • L2 plus FEATURES AND SECURITY: Static routing, VLANs, QoS, Voice VLAN, MSTP, IGMP Snooping Access Control List (ACL), 802. 1X, DoS prevention, SSH/SSL.
  • PEACE OF MIND: Limited lifetime , one year of technical support, and free software fixes for the term of the.
Check Stock

LoveRPi Compact PoE HAT with PWM Fan Controller for Raspberry Pi 4

  • COMPACT RASPBERRY PI 4 POE HAT: Ideal for non-grounded installation, this NON-ISOLATED PoE HAT features optimized footprint. Must be used with a standards compliant IEEE 802.3af PoE or 802.3at PoE+ switch that complies with Section 33.4.1 for power sourcing equipment (PSE) electrical isolation. "Passive PoE" (DC 24V or 48V) is not standards compliant and may cause damage to equipment if connected improperly. Some Ubiquiti switches are not properly isolated and require isolated PoE HATs..
  • GROUND LOOPS WARNING: Do not use this device with grounded USB peripherals, HDMI displays, and attachments. Please use the professional PoE model with isolation transformer to prevent electrical loops. In non-controlled PoE applications, ALWAYS use the professional PoE model..
  • INTEGRATED PWM FAN CONTROLLER: Based on the EMC2301 SMBus compliant fan controller, this PoE HAT is fully programmable over I2C to control standard 4-pin PWM fans. Set user-space or device-tree based temperature or event triggers for complete fan control from off to maximum RPM. Fan speed tach also provides stall detection, spin-up control, and ramp rate control with 1% accuracy from 500-16K RPM..
  • VENTILATED CASE WITH FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without acti....
Check Stock

UCTRONICS PoE HAT for Raspberry Pi 4 with Case, 802.3at Power Over Ethernet Expansion Board for Pi 4 B Board, with Cooling Fan

  • Perfect for Pi 4: This PoE HAT can be used with Raspberry Pi 3 model B+ and Raspberry Pi 4 model B (not included). Please contact us if you received wrong pieces, we will send you a new case kit ASAP..
  • Higher Output Power: DC 5V (3A Max) / 12V (2A Max) via on-board terminal block.
  • Over-temperature Protection: The 25mm×25mm brushless cooling fan will turn automatically when the temperature of the processor is high..
  • Well-ventilated Case: Cut-outs for every port of Pi 4 board and PoE hat, easy to access to all ports as well as supplying well-ventilated environment..
  • NOTE: PSE (Power Supply Equipment) is needed to supply PoE signal to the Raspberry Pi, such as a PoE switch or injector..
Check Stock

Tenda 8 Port Fast Ethernet Switch（S108）| Desktop Ethernet Splitter | Ethernet Hub | Plug and Play | Fanless & Quiet | Unmanaged

  • 6 kV Lightning Protection: The switch offers various safety and protection types, including 6 kV lightening protection, PSE short-circuit protection, PoE overload protection, surge current protection etc..
  • Dual Uplink Port: With two 10/100Mbps uplink ports, the switch can meet the current demand for uplink bandwidth with NVR and router connection..
  • Standard PoE Power Supply: The switch support IEEE 802.3at/af standards. The entire switch offers a maximum PoE power output of 58 W, and 30 W for a single port, to supply power to and data transmission with IP cameras..
  • 250 m Data Transmission:I t supports extend mode and one-key VLAN. The hardware DIP mode switch makes long distance transmission effortless..
Check Stock

POE IP Camera POE Network Camera ModuleBlueFishcam IP Security Board Camera for DIY/Repair/Upgraded (2MP, 3 Lenses)

  • 2MP 1080P POE IP board Camera network Security camera module 2.8mm,3.6mm & 6mm fixed lenses Hidden Camera Indoor Security Surveillance Motion Detection for DIY/repair/upgrade.
  • Advanced H.265X/H.264 video compression,Super low rate,high definition quality of image.
  • Support various mobile monitoring(iPhone,Android).
  • Support POE IEEE8023af/at, And it's with additional assisted power supply. Power supply required: 12V 2A or above 2A.
  • Package content: 1 piece of POE mini IP board camera/network camera module..
Check Stock

Network Cable Tester, Poe Cable Tester for CAT5e/CAT6/CAT6a, Ethernet Network Tester with NCV, NF-8209 Network Cable Tracker, Test Fault Distance Location and Length Measurement by TDR

  • ▶【Three scan modes】AC filter mode/ Analog mode/ PoE mode.
  • ▶【PoE testing】Test the information of standard PoE device, such as POE voltage, power supply polarity, power supply mode and also the type of PSE(af or at standard)..
  • ▶【Hub blink】Locate network port by the flashing port light on Hub / Switch. Available to 10M/100M/1000M Hub/ switch..
  • ▶【Length measurement】Cable length testing accuracy can be up to 98% and 200 m..
  • ▶【Cable continuity testing & NCV】Test physical status for STP, UTP lan cable. Detect AC voltage presence (50V-1000V)..
Check Stock