Reviews Poe Office

Huacomm 8 Port PoE Switch with Full PoE+ Ports Plug-and-Play Desktop for IP Camera Access Points IP Phone Metal Housing Ethernet Extended Unmanaged IEEE 802.3af/at 96W HC1709P

  • The new and powerful upgrade for HC1709P: Power consumption upgrade from 65W to 96W + Human oriented design of power usage + Build-in power supply..
  • 8 PoE+ Ports plus 1 Uplink Port 10/100Mbps PoE Switch, Supports PoE power up to 30W for each PoE port, 96W for all PoE ports, full IEEE802.3af/at....
  • Security&Reliable. Smart PoE Power Supply, automatically identification, never destroy the front equipment. One-by-one port start function, avoid....
  • This PoE switch is ideal for powering PoE devices such as IP cameras, WLAN access points, IP phones, offices, office access control systems, and other....
  • LIMITED LIFETIME WARRANTY and 24/7 Technical Support..
Check Stock

Reidubo 6 Port Ethernet PoE Switch with 4-Port PoE, 2 Uplink Port, 100Mbps, 75W, Unmanaged, Plug and Play, Extend & VLAN(Compatible with TP-Link &Ubiquiti Access Point-AP WIFI6)

  • 【Unmanaged Plug and Play &Multiple installation options】Reidubo PoE Switch support automatically detect devices, just plug in the power cord and network cable.Easy setup with no software installation or configuration needed.Supports desktop, wall or rack placement.It can be installed in office, home, and commercial locations, it is the good choice for high bandwidth requirements.
  • 【Intelligent PD Detection& QoS function】The PoE switch will automatically identify whether the device connected to the port needs power supply. If it is a non-poe device that does not require power，the power of the port can be automatically turned off, which can protect the non-POE device from damage.When the poe switch is carrying full traffic, Quality of Service(Qos) optimizes network management which make the PoE Switch prioritize the transmission of important content on 1-2 ports.
  • 【Extend & VLAN Mode(E+V)】In standard mode, all PoE ports are able to communicate freely and are suitable for normal data transmission. In E+V mode, each POE port supports up to 820ft transmission distances and 10 Mbps rate, and the PoE port is isolated from each other but communicates with uplink ports. If you would like to run multiple devices/cameras on th....
Check Stock

MokerLink Gigabit POE Switch, 5 Port and 8 Port PoE Switch, IEEE802.3af/at, Unmanaged Plug and Play, Sturdy Metal Fanless

  • 5 Port Gigabit PoE Switch: 4 Gigabit POE ports, 1 Gigabit Uplink Ports, 1000Mbps, 78W.
  • 8 Port Gigabit PoE Switch: 8 Gigabit POE ports, 1000Mbps, everyport can be uplink,120W.
  • Plug & Play: Support Power Detection function, automatically detect devices, can be compatible with non-POE devices to provide data. Plug and Play, just plug in the power cord, connect the ethernet cable directly to the device, without configuration..
  • Fanless design, always working silently. With mounting ears and screws for wall mounting, suitable for multiple installation environments..
  • Widely Used: Durable Metal housing. LED indicator lights. Widely used in IP cameras, Wireless Access Point, Home and Office Networks, etc. 100% Satisfaction - 30-day Money-Back and Lifetime Tech Support..
Check Stock

Cudy GS1010P 10-Port Gigabit Ethernet Unmanaged PoE Switch, with 8 x PoE+ @ 120W, Desktop/Rackmount, CCTV/VLAN Mode, 802.3af/ 802.3at, Plug and Play

  • 10 Gigabit Ethernet ports, 8 port PoE with 120W total power budget, 2 port gigabit uplink ideal for connecting NVR and Internet. Compact Design with Internal Power Supply.
  • PD Detect and Port Power Prioritization: With PD Detect Auto-sensing technology, this 8 port PoE switch delivers up to 32W to an 802.3at PoE+ device with backwards compatibility for 802.3af PoE (15.4W) devices.Port-Power-Prioritization technology guarantees continuous power supply of key nodes. Pin assignment: alternative 1/2 (+), 3/6 (-)..
  • CCTV mode support remote power and data feeding up to 250m long distance, which is easy to expand network via ethernet cable to somewhere without power supply but need fix device such as IP Cameras..
  • VLAN mode support isolate 8 PoE+ port from each other. It is easy for this 8 port PoE switch to manage and maintain which can meet a lot of networking environment, such as Business building, Community, Hotel, Office etc..
  • High Quality chipset inside: Use TPS POE chip high quality chip to ensure stable operation of the product.Plug & play: Mode A alternative 1/2 (+), 3/6 (-) power supply, simple set up with no software or configuration needed..
Check Stock

Cudy 8 Port PoE+ Switch with 2 Uplink Ports 120W, 8 10/100Mbps PoE+@120W, Extend/VLAN Mode, 802.3af, 802.3at Standard, Fanless, Watchdog, Plug and Play FS1010P

  • Reliable 10/100Mbps IEEE 802.3af/802.3at compliant PoE+ switch with 120W total PoE Power supply. Ideal for small installations of 8 PoE devices (IP Phone, Wired surveillance camera, Wireless Access Point)..
  • PD Detect and Port Power Prioritization: PD Detect Auto-sensing technology delivers up to 32W to an 802.3at PoE+ device with backwards compatibility for 802.3af PoE (15.4W) devices. Port-Power-Prioritization technology guarantees continuous power supply of key nodes. Pin assignment: alternative 1/2 (+), 3/6 (-)..
  • CCTV function support remote power and data feeding up to 250m long distance, which is easy to expand network via ethernet cable to somewhere without power supply but need fix device such as IP Cameras..
  • VLAN mode support isolate 8 PoE+ port from each other. It is easy to manage and maintain which can meet a lot of networking environment, such as Business building, Community, Hotel, Office etc..
  • Plug & play: Mode A alternative 1/2 (+), 3/6 (-) power supply, simple set up with no software or configuration needed..
Check Stock

Cudy 8 Port Gigabit PoE+ Switch 120W, PoE Switch, 60 watts port1, 8 PoE Ports, 802.3 at/af, POE, PoE+, VLAN, Extend to 250 Meters, Not Support 802.3bt, GS1008PT

  • 8 Port Gigabit PoE Switch, 120 Watts total PoE Budget + 2 x PoE+ports ( 60 watts maximum) +6 x PoE+ Ports(802.3at, 30 watts maximum)..
  • IEEE 802.3 at/af Compliant. Port #1 and #2 support IEEE 802.3 at/af, which could offer up to 60 watts PoE power. Port #3 ~ Port #8 support IEEE 802.3 at/ af, which could offer up to 30 watts PoE power..
  • VLAN Port Isolation. When working on VLAN mode, Port #1 ~ Port #6 will isolated from each other, while port #7 and #8 can communicate with them all. It is easy to manage and maintain, which can meet a lot of networking environment, such as Business building, Community, Hotel, Office etc..
  • Extend Long Distance. When working on Extend mode, the data transmission distance of Port #3 ~ #6 can be extended up to 250 meters(10Mbps speed), which is easy to expand network via ethernet cable to somewhere without power supply but need fix device such as IP Cameras..
  • Plug and play, Wall mount support, internal power supply. Power input support wide voltage range from AC 100V to AC 240 V. While the power output range is 44V to 52V accroding to IEEE 802.3af/at/bt standard. #Important Note: This item only support IEEE802.3 at/af device, does not support any non-standard or passive POE device.#.
Check Stock

SonicWall SWS12-8POE Network Security Switch (02-SSC-2463)

  • SonicWall SWS12-8POE Network Security Switch (02-SSC-2463).
  • The SWS12-8POE SonicWall switch delivers highspeed network switching while providing unparalleled performance and manageability. It prioritizes certain traffic on the network such as VOIP for video conferences while working from home, with features such as QoS. This switch is ideal for small and medium-sized business (SMB), and Software-Defined Branch (SD-Branch) deployments..
  • SonicWall Switch offers Zero-Touch Deployment capability with the ability to quickly roll out devices across branches spread out globally. Admins can quickly and securely deploy these switches at new locations without requiring any costly on-site IT personnel..
  • The SonicWall Secure SD-Branch solution transforms user experience at branch office locations by delivering a unified platform that enables branches to be deployed in minutes and delivers unified visibility and threat detection from a single pane of glass..
  • Hardware: Gigabit Ethernet Ports: 8 | SFP Ports: 2 | Total Interfaces: 10 | PoE version: PoE | Memory (MB): 256 | Flash (MB): 32 | Switching: 20 Gbps.
Check Stock

Aumox 28-Port Gigabit PoE Switch with 24 x PoE 400W, 2 x Uplink Gigabit Ports, 2 x 1G SFP Slots, Rackmount or Desktop, PoE Recovery, Plug and Play, Fan Design,VLAN, 802.3 Af/at, Unmanaged (SG528P)

  • ...ng and powerful industrial fans design provide more stable performance and heat dissipation while effectively reducing noise, enabling safer and longer-lasting operation in a variety of temperature environments..
  • 【Designed to Meet Diverse Needs】: Flexible interface design provides more options: suitable for home office, small and medium business, surveillance, education. One-Key VLAN function effectively suppresses network storms, providing with more secure data transmission..
Check Stock

D-Link PoE Switch, 8 Port Ethernet Gigabit Unmanaged Desktop Switch with 4 PoE Ports 68W Budget (DGS-1008P),Black

  • Ultra-quiet compact design for home and office use.
  • 4 ports provide PoE+ up to 30W per port for a total Poe budget of 68W.
  • Supports IEEE 802 3af and 802 3at on all PoE ports.
  • Limited Lifetime - void when not purchased from authorized US D-Link reseller.
Check Stock

Cudy 5 Port Gigabit PoE+ Switch 120 W, PoE Switch, 60 watts for Port1, 4 PoE Ports, 1 SFP, 802.3 at/af, VLAN, Extend to 250 Meters, Not Support 802.3bt, GS1005PTS1

  • 5 Port Gigabit PoE+Switch,120 Watts total PoE Budget + 4 Gigabit PoE Ports + 1 Gigabit Ethernet Uplink Port+1 Gigabit SFP Uplink Port ..
  • IEEE 802.3 at/af Compliant. Port #1 support IEEE 802.3 at/af, which could offer up to 60 watts PoE power. Port #2 ~ Port #4 support IEEE 802.3 af / af, which could offer up to 30 watts PoE power..
  • VLAN Port Isolation. When working on VLAN mode, Port #1 ~ Port #4 will isolated from each other, can only communicate with Port #5 and SFP slot. It is easy to manage and maintain, which can meet a lot of networking environment, such as Business building, Community, Hotel, Office etc..
  • Extend Long Distance. When working on Extend mode, the data transmission distance of Port #3 and Port #4 can be extended up to 250 meters(10Mbps speed), which is easy to expand network via ethernet cable to somewhere without power supply but need fix device such as IP Cameras..
  • Plug and play, Wall mount support, internal power supply. Power input support wide voltage range from AC 100V to AC 240 V. While the power output range is 44V to 52V accroding to IEEE 802.3af/at standard. #Important Note: This item only support IEEE802.3 at / af device, does not support any non-standard or passive POE device.#.
Check Stock