Reviews Poe Fiber Switch

EnGenius Cloud Managed 48-Port Multi-Gigabit L2+ Managed PoE+ Switch with 740W & 4 SFP+ Slots

  • 32 Gigabit and 16 2.5-Gigabit PoE Ethernet Ports.
  • 802.3 at/af PoE+ Ready on All Ports with 740W PoE budget.
  • 4 10-Gigabit Dual-Speed SFP+ (fiber) uplink ports.
  • Real-Time System Metrics, Deep-Dive Analytics and Remote Configurations.
  • Hybrid Switch Supports Multiple Management Options.
  • Security - Access Control List/Port Security.
  • Spanning Tree (STP), Rapid Spanning Tree (RSTP) & Multiple Spanning Tree (MSTP).
  • Energy Efficient Ethernet (802.3az) improves energy savings when used with other compliant devices.
Check Stock

Goalake 6 Port Gigabit Ethernet Unmanaged PoE+ Switch, 4 Gigabit PoE+ @52W Built-in Power, 1 Gigabit Uplink + 1 Gigabit SFP Slot, 802.3af/at, VLAN Mode, 4kV Lightning Protection, AI Detection

  • 【VLAN mode 】VLAN mode(Turn on the VLAN switch) support isolate 4 PoE+ port from each other. It is easy for this 4 port PoE switch to manage and maintain ,Prevent broadcast storms, Prevent data confusion, Wireless networking application data is more stable..
  • 【Active poe switch with 802.3af/at compliant】Goalake poe switches support poe devices and non-poe devices, But when connecting passive poe device or non-poe device,the switch can only transmit data and cannot power your device,so the connected device needs to be separately powered. Or you can use it with active poe splitter..
  • 【4 gigabit poe switch@52W 】PoE switch with 4 1000M PoE port + 1 1000M Uplink port,1 x 1G SFP,4×PoE ports providing up to 30W per port, total PoE budget 52W.1 gigabit ethernet Uplink Port for connecting NVR and Internet , etc...
  • 【4KV Lightning Protection】Goalake PoE switch have professional lightning protection design-up 4KV port and power supply thunder prevents, with two levels of protection design respectively, effectively restrain the power of lightning from cable, which equivalent to give the entire network monitoring system with a security fence..
  • 【AI Watchdog function of poe port】When the data or electrical transmission between the poe port and the term....
Check Stock

YIDUOYUNCAI 11Port PoE Switch,8 Port 100Mbps PoE+2*1000Mbps Uplink Port and1Gigabit SFP Slot,150W,802.3af/at,Metal Fanless,Unmanaged Plug and Play

  • 【11port poe switch@150W 】PoE switch with 8 100M port PoE + 2 1000M Uplink port+ 1 SFP port, 8×PoE ports providing up to 30W per port, total PoE budget 150W, 2 gigabit ethernet Uplink Port for connecting NVR and Internet , etc..the SFP slot can choose the optcial model with 2km,10km,20km,40km...etc..
  • 【Active poe switch with 802.3af/at compliant】poe switches support poe devices and non-poe devices, but when connecting passive poe device or non-poe device, the switch can only transmit data and cannot power your device, so the connected device needs to be separately powered. Or you can use it with active poe splitter..
  • 【AI PD Detection】The poe port will intelligently judge whether the device connected to the port needs power supply. If it is a non-poe device that does not need power supply, the switch will not supply power to these devices and will not damage the device..
  • 【Built-in power supply】The power supply is located in the poe switch body and integrated with the switch. It is simple and light. After connecting to our AC Power Cable, the switch can transmit power to the equipment connected to the switch..
  • 【Plug and Play】Easy setup with no software installation or configuration needed.
  • 【Network cable short-circuit protection mechani....
Check Stock

MikroTik CRS354-48P-4S+2Q+RM Switch has 48 x 1G RJ45 Ports and 4 x 10G SFP+ Ports 2 x 40G QSFP+ Ports for Extremely Fast Fiber Connections or Linking with Other 40 Gbps Devices

  • The new CRS354-48P-4S+2Q+RM is an effective and adaptable rackmount solution for managing networks in the most demanding environments.
  • This powerful switch has 48 x 1G RJ45 ports and 4 x 10G SFP+ ports. There are also 2 x 40G QSFP+ ports for extremely fast fiber connections or linking with other 40 Gbps devices.
  • All 48 Ethernet ports offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing, making this switch the easiest solution to power even the largest setups.
  • The total non-blocking throughput is 168 Gbps, switching capacity is 336 Gbps and the forwarding rate reaches 235 Mpps.
  • We have included a mighty power supply that can provide 750 W of power – this switch can handle a lot. And there is a special bracket for easy cable management.
Check Stock

YIDUOYUNCAI 6 Port PoE Switch (4*100Mbps PoE Port+2*100Mbps Uplink Port),78W,802.3af/at,VLAN,Metal Fanless,Unmanaged Plug and Play

  • 【6 Port PoE+ Switch】4*10/100Mbps PoE+ Ports(802.3at/af)&2*10/100Mbps uplink, power budget up to 30W per PoE port and 78W for the whole..
  • 【Extend Mode】When Extend Mode is enabled, the transmission distance of POE ports can be extended to 250m at transaction rate of 10M..
  • 【Active poe switch with 802.3af/at compliant】Poe switches support poe devices and non-poe devices, But when connecting passive poe device or non-poe device,the switch can only transmit data and cannot power your device,so the connected device needs to be separately powered. Or you can use it with active poe splitter..
  • 【AI PD Detection】The poe port will intelligently judge whether the device connected to the port needs power supply. If it is a non-poe device that does not need power supply, the switch will not supply power to these devices and will not damage the device..
  • 【Plug and Play】6 Port Unmanaged Network Switch Support automatically detect devices,easy to setup with no software installation or configuration required..
  • 【Fanless design】The fanless design makes poe switch work without any noise..
  • 【Network cable short-circuit protection mechanism】POE switch is stable and has strong anti-interference ability, protect the fault caused by the short circuit of the ....
Check Stock

Reidubo 6 Port Ethernet PoE Switch with 4-Port PoE, 2 Uplink Port, 100Mbps, 75W, Unmanaged, Plug and Play, Extend & VLAN(Compatible with TP-Link &Ubiquiti Access Point-AP WIFI6)

  • 【2*Uplink Port & 75W】The Reidubo PoE Switch with 2*10/100Mbps uplink ports and 4*10/100Mbps POE ports can transmit data and power at the same time.Reidubo network switch offers whole 75W PoE power output but maximum power for each port is 30W.2*uplink port can connect to NVR, other switches, routers, etc.A wide range of connection options to meet your diverse Internet needs..
  • 【Built-in Power Supply & 4KV Lightning protection】Reidubo 6-port PoE switch built in power supply (75W).power adapter no more needed,which makes the PoE Switch simpler and lighter. Ideal for PoE IP Camera, Access Point, IP Phone and other PD devices..4KV lightning protection design allows your products and equipment to operate stably even in bad weather. Supporting IEEE802.3af/at PoE Protocol, with per port output power of 15.4W/30W..
  • 【Unmanaged Plug and Play &Multiple installation options】Reidubo PoE Switch support automatically detect devices, just plug in the power cord and network cable.Easy setup with no software installation or configuration needed.Supports desktop, wall or rack placement.It can be installed in office, home, and commercial locations, it is the good choice for high bandwidth requirements.
  • 【Intelligent PD Detection& QoS function】The PoE switch w....
Check Stock

MikroTik Gigabit Ethernet Smart Switch with PoE-out and RouterOS L5 CRS112-8P-4S-IN

  • CRS112-8P-4S-IN is eight Gigabit RJ45 ports PoE switch, that offers different power output options: autosensing 802.3af/at PoE/PoE+ and Passive PoE.
  • Four SFP ports provide optical fiber connectivity options to support uplinks of up to 1 Gbps.
  • There is secondary DC jack on the back of the enclosure that supports 48-57 V power supply (not included, can be purchased separately).
  • CRS112-8P-4S-IN can power 802.3af/at devices if 48-57 V DC input is used (unit will automatically detect and provide correct power to devices).
  • Max current is 1 A per port if input voltage is 18-28 V, 450 mA if 48-57 V. Total limit is [email protected] and [email protected].
Check Stock

Mikrotik CRS328-24P-4S+RM 24 port Gigabit Ethernet router/switch with four 10Gbps SFP+ ports in 1U rackmount case Dual Boot and PoE output 500W

  • Mikrotik CRS328-24P-4S+RM is a 28 independent port switch, it has 24 Gigabit Ethernet ports, which offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing.
  • PoE-Out is passed over mode B pins (4,5+)(7,8-). The four SFP+ ports provide up to 10 Gbps connectivity options via either optical fiber or Ethernet modules (not included).
  • CRS328-24P-4S+RM comes in a 1U rackmount case with 100-240 V AC 500 W power supply built-in.
  • The device consumes up to 44 W leaving guaranteed 450 W (3x150 W per every 8 Ethernet ports) to power your PoE devices. Each port can provide up to 30 W of power with any power output option you choose.
  • It has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS.
Check Stock

Poe Switch, 10 Port Gigabit PoE+ Switch, Cloud Managed Gigabit Ethernet Switch, 8 Poe Ports @120W, 2 Uplink Ports, APP Smart Managed, Extend to 250M, Overload Protection w/ Port

  • Connect All Your Devices With Gigabit Switch: STEAMEMO gigabit PoE ethernet switch offers 10*10/100/1000 Mbps Base-TX RJ45 ports, including 8 PoE ports which automatically identifies and powers PoE devices. Built-in power supply makes adapter no more needed, easier to use..
  • Easy To Set-up And Cloud Managed PoE Switch: Connect devices securely, 10 port visibility, and simple cloud management with the SSC Switch mobile app.
  • Alerts for connectivity problems and remote troubleshooting tools when needed. One-key to remote PoE function with mobile APP.
  • Remote Access, feel free to Live check and solve the problems with your family or friends via SSC POE Switch App wherever you are..
  • Cloud Managed Ultra-Far Transmission ethernet PoE+ Switch: One-click to turn on Ultra-Far mode, Cloud Managed PoE switch will deliver power up to 250 meters, improve the network performance and poor transmission quality, easily solves problems such as monitoring freezes. Perfect for IP cameras or access point deployment in large areas..
  • Vlan mode & Remote detection: Apply bulk settings to switch ports, Vlans, ISO. Quickly check the working status of the switch’ each port. You can know the network performance and data transmission status of each port of the switch by detectin....
Check Stock

YuanLey 6 Port PoE Switch with 4 Port PoE+, 2 Ethernet Uplink, 100Mbps, 78W 802.3af/at, Extend Function, Metal, Desktop, Unmanaged Plug and Play

  • 【Port and Rate】This poe ethernet switch Include 4x10/100Mbps POE ports and 2x10/100Mbps uplink. All 1-4 POE ports support IEEE802.3AF/AT POE standard. The double uplink port can connect to nvr, switch, router, etc, make the network more reliable and flexible..
  • 【78W High PoE Power】This poe injector built-in industrial power supply. The whole power is 78W, each port up to 30W and 15.4W in the same time.**Please note: not compatible 24V passive PoE**.
  • 【Plug and Play】This poe network unmanaged switch support automatically detect devices, just plug in the power cord and network cable, no configuration required, easy to use..
  • 【Extend Function】 When the extend mode is enabled, single POE port supports 250m transmission distances and 10Mbps speed, and all PoE ports support VLAN isolation, improve the network safety..
  • 【Wide Applications】PoE and non-POE devices can be connected to this poe hub, such as poe camera/wireless ap, switch, router, computer, etc. It runs without noise and can be installed in office, home, and commercial locations. If you have any questions, please contact our official support, we will provide the best after-sales service.
Check Stock