Reviews Poe Amplifier

Algo 8188 PoE SIP Ceiling Speaker for Paging Notification & Music

  • SoundSure ambient noise compensation to automatically adjust output level.
  • Voice Paging with talkback capability - High efficiency and high output wideband speaker.
  • Pre-loaded with several ring tones including bell, chime, gong, buzzer, warble, and dogs.
  • Supports custom uploaded WAV files or recorded messages - Multicast receive or broadcast capability.
  • Outputs for external speaker, slave amplifier, or visual alerter - PoE (Power over Ethernet).
Check Stock

Obihai OBi2000 Series Gigabit IP Phones (OBi2182) (Renewed)

  • High-Definition 'HD' Voice Technology for Crystal-Clear Call Clarity - Service Dependent.
  • OBiTALK Cloud Management and Service Configuration.
  • Large Vivid 5" (800x480) Color Display - User Configured Themes and Multi-Dimensional Navigation.
  • Full-Duplex Speakerphone with Built-In Class D Amplifier and Audio Equalizer.
  • Built-in WiFi (5GHz and 2.4GHz 802.11ac) and Bluetooth4.0 with Dual Gigabit Ethernet Ports with Power over Ethernet (PoE) Support - External 12v Power Supply Included.
Check Stock

Gigabit Wireless Bridge, KuWFi 1200Mbps WiFi Bridge Point to Point Outdoor, 2.4&5.8G Long Range WiFi Bridge CPE with Panel Antenna Up to 5KM with 48V PoE Power[2-Pack]

  • ...igabit WiFi Bridge CPE2200 with ABS waterproof, dust proof and sunscreen shell, avoid the damage from dust, rainy weather. Meantime, it adaptive to various environment, the working temperature can be at -40℃ to 55℃. Suit for any country.
  • High Power, High Gain Antenna, more WiFi Range - Designed in two line Power Amplifier on PCB board, the power can be 500mW high power, build in dual band panel WiFi antenna, the PTP/PTMP WiFi range more than 5KM.
  • Power over Ethernet - Outdoor AP CPE2200 has integrated active Power over Ethernet (PoE), 10/100/1000Mbps WAN/LAN ports, for easy installation and lower cost. So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure. Pls note, the default is 48V IEEE 802.3at PoE, 24V Passive PoE is possible by change PCB board.
  • Multiple Operation Mode - support wireless AP, WiFi Repeater operation mode, max to meet with different operation request.
  • With Access Control System under AP/WDS operation mode, easily access advanced network settings through PC, like AP status monitor, change IP address, ESSID, Channel, Password, upgrade firmware, backup and restore, Then work with Cloud Management System, easy to do central and remote manage....
Check Stock

Earthquake Sound BTA-250 Three Input in-Wall 2-Channel Stereo Amplifier | Power Over Ethernet (PoE) and Balanced Audio in with Cat 5/6 Support

  • In-wall 2-channel stereo amplifier that produces 50 WRMS per channel at 4-Ohm and 25 WRMS per channel at 8-Ohm.
  • Versatile: Three inputs allow the amplifier to accept signal through front panel 3.5mm stereo mini jack, Bluetooth, and Ethernet.
  • Works with Earthquake Sound's IWS Stereo In-Wall Pre-amp (sold separately) for Power over Ethernet (PoE) plus signal support.
  • Built-in Bluetooth allows you to stream audio wirelessly to a connected speaker system.
  • Compatible with Alexa and the latest smart devices with a wireless range of up to 32.8 feet (10m).
  • One front-mounted control knob controls power, volume, and Bluetooth pairing mode.
  • Easy to install into any new or pre-existing construction for home or office.
  • BTA-250 offers flexibility, power, and control all in one small and discrete package.
Check Stock

Outdoor WiFi Range Extender,UeeVii 2.4G/5.8G Wireless Gigabit Access Point with 2*5dbi Antenna, Power Amplifier,48V PoE Adapter, IP66 Weatherproof, Perfect for Backyard, Garage, Barn, Garage,1-Pack

  • ... reach 1000Mbps. Both WAN/PoE and LAN/PoE ports support 802.3af 48V standard power supply, saving energy consumption and easy deployment.
  • Support up to 164FT CAT 5e/6 network cable, PoE adapter is not waterproof, and waterproof measures should be taken..
  • Wireless AP equipped with a high-performance independent power amplifier circuit (PA) to improve wireless transceiver performance, the signal is stronger than ordinary AP, AP/Router/Repeater/Bridge 4 working modes are optional, the default is routing mode, it is recommended to use AP mode..
  • Support PSK, WEB, and other authentication methods, WEB security is realized through URL keyword filtering, support WPA (TKIP), WPA-PSK, WPA2, (AES), and other data encryption methods, support attack defense in AP routing mode, mainly including DDOS defense network attack.FCC ID: OYR-CF-EW72.
Check Stock

AMPHENOL IPGH3M4-VF Infinity Premise Docsis Passive 3 x HYBRID + 4 x MoCA Ports Splitter

  • MoCA Gateway Network Compatible. 3 x HYBRID Ports and 4 x MoCA Ports.
  • 5-1002 MHz between IN to Hybrid1, 2 and 3 Ports.
  • 1125 -1675 MHz between Hybrid1, 2, 3 and MoCA1, 2, 3 and 4 Ports.
  • Low Port - to - Port Isolation between Hybrid1, 2, 3 and MoCA1, 2, 3 and 4 Ports.
  • Eliminates the need for a POE Filter. Replaces Current Amplifier Setups for better Signal Gains..
Check Stock

LINOVISION Mini 2 Port POE Extender IEEE 802.3af/at POE Repeater Up to 1000ft Power Over Ethernet Over Cat5/6 Cable, POE Splitter to 2 POE Devices Like IP Cameras, IP Phone, Wireless AP

  • 【2-PORT POE SPLITTER】This 2-port POE extender is designed to supply POE power to two POE devices through one Cat5E/6 cable, and no power adapter is required. It is powered by 48V or 53V PoE Switch/POE NVR/PoE Injector/Mid-span. With this POE splitter, users can easily add extra POE device or non-POE device to existing cable without running a new network cable..
  • 【UP TO 1,000FT POE + DATA EXTENTION】Extra 330ft POE+Data transmission will be extended with one Linovision POE Extender. And it supports two levels cascade deployment, therefore total 1,000ft POE + Data transmission is provided. (The 2nd POE Extender’s POE Input should be connected to the 1st POE Extender’s Out port, not Camera port).
  • 【COMPLIANT TO IEEE802.3AF/AT STANDARD】This POE Extender works with all standard IEEE802.3af/at POE Switches/POE injectors/POE NVRs. And the POE Outputs supply power to standard POE devices (don't support 24V POE Devices) , like POE IP camera/IP phone/IP speaker. Noted: The CAMERA Port supports max 8W power consumption and the OUT Port supports max 15W. The max bandwidth is 100Mbps. As the distance increases, the power and the bandwidth will decrease..
  • 【EASY TO CONFIGURE IP CAMERA ON SITE】By interting this PoE-Extender02 to an existing PoE cable, ....
Check Stock

OSD Optional Control Keypad Kit with IR Receivers for Nero Max12 Multi Channel Amplifier

  • [Room-to-room control] An optional control keypad kit and single IR remote for the Nero Max-12 multi-channel/six zone amplifier.
  • [Power Over Ethernet] POE enabled with built-in IR receivers in each keypad.
  • [Hard-wired option] An alternative to free OSD Control App which duplicates the control keypads for tablets and smartphones.
  • [Complete zone control] Select source, adjust volume, treble and bass, or turn all zones on or off directly through the keypads.
  • [Décor friendly] All keypads include Decora style outer plates that blend into interiors.
Check Stock

XM1000pro

  • 【PoE & IP OVER COAX CONVERTER】LINOVISION’s POE IP Over Coax converter can be used to upgrade analog system to IP surveillance system while using existing coaxial cable. Compatible with RG59, RG6 cables. Supports POE standards 802.3af (PoE) and 802.3at (PoE+). EOC Receiver should be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices.
  • 【LONG REACH POE TRANSMISSION】Up to 100Mbps in 300m (1000ft) RG59 cable transmission, max 1000m (3000ft) distance in 10Mbps, working with CCA/CCU RG59/RG6 cable. Support POE power transmission with load capacity 11W over 300m (1000ft) transmission, working with POE IP camera, VoIP phone, POE WiFi AP.
  • 【INDUSTRIAL DESIGN WITH BUILT-IN HEAT SINK】Industrial design, with built-in heat sink, ensure super reliability and hassle free transmission. Indoor use ONLY. Plug-and-play, configuration free, makes installation simplest. Small design (3.1"x2.0"x0.9") and light weight.
  • 【POINT TO POINT CONNECTION ONLY】Act as MoCA (Multimedia over Coax) in point-to-point connection, transmit video/audio/data/control signal over coaxial cable.
  • 【WORRY FREE】1 year warranty, US local technical support + Global after-hour support..
Check Stock

Goalake 6 Port Gigabit Ethernet Unmanaged PoE+ Switch, 4 Gigabit PoE+ @52W Built-in Power, 1 Gigabit Uplink + 1 Gigabit SFP Slot, 802.3af/at, VLAN Mode, 4kV Lightning Protection, AI Detection

  • 【VLAN mode 】VLAN mode(Turn on the VLAN switch) support isolate 4 PoE+ port from each other. It is easy for this 4 port PoE switch to manage and maintain ,Prevent broadcast storms, Prevent data confusion, Wireless networking application data is more stable..
  • 【Active poe switch with 802.3af/at compliant】Goalake poe switches support poe devices and non-poe devices, But when connecting passive poe device or non-poe device,the switch can only transmit data and cannot power your device,so the connected device needs to be separately powered. Or you can use it with active poe splitter..
  • 【4 gigabit poe switch@52W 】PoE switch with 4 1000M PoE port + 1 1000M Uplink port,1 x 1G SFP,4×PoE ports providing up to 30W per port, total PoE budget 52W.1 gigabit ethernet Uplink Port for connecting NVR and Internet , etc...
  • 【4KV Lightning Protection】Goalake PoE switch have professional lightning protection design-up 4KV port and power supply thunder prevents, with two levels of protection design respectively, effectively restrain the power of lightning from cable, which equivalent to give the entire network monitoring system with a security fence..
  • 【AI Watchdog function of poe port】When the data or electrical transmission between the poe port and the term....
Check Stock