Reviews Pneumatic Muffler

uxcell 9mm Male Thread PSU Type Pneumatic Exhaust Noise Silencer Muffler 5pcs

• Overall Size(Each) : 37 x 14mm/1.4" x 0.55"(L*Max.D).
• Package Content : 5 x Pneumatic Silencer Muffler.

Mtsooning 10PCS Air Pneumatic Flow Control Mufflers 1/4inch Exhaust Muffler Filters Bronze Thread Hex Brass Silencer Replacement for 1/4 NPT BSL-02

• MATERIAL: The pneumatic Mufflers are made of copper, with high pressure resistant, not easy to rust and trip, providing better noise reduction..
• SIZE: The size of the brass flow control muffler is thread outer diameter: 1/4 inch/12.5 mm.
• thread length: 0.28 inch. Please pay attention to whether the size of the product matches your device before placing an order..
• PRINCIPLE: The sintered exhaust muffler designed in many small holes drilled in the pipe wall, when the air flows through the small holes, gradually changing the frequency of the original airflow, thereby reducing noise..
• APPLICATION: The thread hex brass muffler can be used in air cylinder, solenoid valves, crankcase, gearbox, oil tanks and pneumatic tools, etc..
• PACKAGE: You will receive 10PCS exhaust muffler filters, and if you have any question about our product , please contact us. We are here to serve and support..

uxcell Plastic Pneumatic Muffler Exhaust Air Line Silencer 1/4 PT Black, 8pcs

• Thread Outer Diameter: Smaller 1/4 PT / 12mm.
• Total Size Per Piece: 40.6 x 15mm / 1.6" x 0.59" (H*D).
• Operating Pressure: 1-10.2kgf/cm^2(0-1.0mpa).
• Operating Temperature Range: 0-60 Degree.
• Tube Material: PU/Nylon and Polyurethane.

Mtsooning 10PCS Pneumatic Muffler, 0.37inch Brass Flow Control Silencer, Sintered Air Controller for Cylinders Solenoid Valves Crank Cases Gear Boxes Oil Tanks

• SIZE AND MATERIAL: The diameter of male thread is 0.37inch / 9.5mm.This pneumatic muffler is made of high-quality brass material, resistant to high pressure, sturdy and durable, and has a long service life..
• FUNCTION: Pneumatic muffler silencers are mainly for reducing dynamic noise or cleaning the exhaust air for pneumatic air solenoid valve..
• APPLICATION: Slicencers are widely used for cylinders, air cylinders, solenoid valves, crank cases, gear boxes, oil tanks, pneumatic tools..
• INSTALLATION: This brass flow control silencer is easy to install and konck down..
• THE BEST AFTER-SALES GUARNTEE SERVICE: When you receive these sintered air controllers, the size is not suitable or too small, or the product is damaged.
• please contact us in time, we will give you a refund or resend..

AIRCAT 6330: 18 Gauge High Performance Nibbler 2,500 SPM/RPM Motor

• Smallest Cut Radius: At only 3/16 inch, allowing clean cuts in tight corners.
• "Oversized" Anvil and Punch: Dramatically increases the reliability of these high-wear parts.
• Rear Exhaust Muffler: 360-degree rotational muffler allows exhaust air to be directed as preferred.
• Nibbler: With throttle lever design for comfortable and convenient operation.
• AirCat Line: The most significant advances in the performance of pneumatic power tools.

URBEST® 10Pcs Solenoid Valve Pneumatic Muffler Filter Noise Silencer 1/4\ PT Thread Pneumatic Air Cylinder Accessories

Jiozermi 12 Pcs Air Pneumatic Mufflers Silencer Brass Pneumatic Exhaust Muffler 1/4 NPT Male Air Silencer Fitting

• 【Product Size】: You will receive 12 piece brass muffler. The total length of each muffler is 1.02 inch. The muffler thread size is 1/4 NPT male thread..
• 【Product Material】: The air muffler sintered is made of brass for durable, corrosion resistance, ductility at high temperatures, low magnetic permeability. The operating pressure is up to 300psi and temperature range of 35F to 300F...
• 【Precision Process】: The threaded pipe fittings was made with precision process, which has clear and deep threads to prevent leakage. The hex nut for easy tightening and loosening..
• 【Wide Application】: The pneumatic sintered air used to connect female pipes with same diameters. It apply to for valves, cylinders,oil tanks, air tools and some other systems that need mufflers to clean the exhaust air and reduce..
• 【Buy with Confidence】: Jiozermi feel confident that you'll love our product, that we'll give your money back if you're not thrilled with your purchase within 30 days. Simply contact us to make it right. It's all on us - so there is zero risk to try the product today..

PAGOW Pneumatic Muffler Silencer, 1/8” Male Thread Brass Air Exhaust Muffler Sintered Bronze Mufflers (Pack of 3)

• 【Product Size】: You will receive 12 piece brass muffler. The total length of each muffler is 0.45 inch. The muffler thread size is 1/8 NPT male thread..
• 【Product Material】: The air muffler sintered is made of brass for durable, corrosion resistance, ductility at high temperatures, low magnetic permeability. The operating pressure is up to 300psi and temperature range of 2°C to 150°C..
• 【Precision Process】: The threaded pipe fittings was made with precision process, which has clear and deep threads to prevent leakage. The hex nut for easy tightening and loosening..
• 【Wide Application】: The pneumatic sintered air used to connect female pipes with same diameters. It apply to for valves, cylinders,oil tanks, air tools and some other systems that need mufflers to clean the exhaust air and reduce..
• 【Buy with Confidence】: Jiozermi feel confident that you'll love our product, that we'll give your money back if you're not thrilled with your purchase within 30 days. Simply contact us to make it right. It's all on us - so there is zero risk to try the product today..

AIRCAT 6505 .5 HP 3-Inch Composite Cut-Off Tool 20,000 RPM

• Patented Muffler Technology: Retains power while quiet-tuned exhaust keeps things quiet (86 dBA).
• Compact: Low weight, a compact power tool is easy to handle.
• Cut-Off Tool: Ergonomic handle for the user's ultimate comfort.
• AIRCAT Line: The most significant advances in the performance of pneumatic power tools.

AIRCAT 6520 .5 HP 3-Inch Composite Reversible Cut-off Tool 18,000 RPM Free Speed

• Patented Muffler Technology: Retains power while quiet-tuned exhaust keeps things quiet (88 dBA).
• Wheel Directional Change: Allows operator to change the direction of sparks.
• Cut-Off Tool: Ergonomic handle for the user's ultimate comfort.
• AIRCAT Line: The most significant advances in the performance of pneumatic power tools.