Reviews Pneumatic Directional Control Valve

RuggedMade 25 GPM Hydraulic Log Splitter Directional Control Valve, Auto Return Detent Lever Handle, 2750 PSI (1/2\ Work Ports)

  • SPECIFICATIONS: This 2 spool valve from Chief’s G Series is a directional control valve with a joystick, 2 spool spring to neutral tandem center, 10 GPM flow rate, SAE 8 work, and SAE 10 inlet/outlet ports. Its maximum working pressure is 3625 PSI..
  • HIGH UTILITY: Our hydraulic valve 2 spool has wide-ranging utility since it can be effortlessly shifted in 3 different positions, providing increased directional control of the actuators. The 3 pos setup also reduces heat buildup..
  • CONSISTENT: The log splitter valve has a spring to neutral tandem center and is therefore consistent, making it a great support for fixed-volume pumps. It is not only economical but also low maintenance..
  • MADE TO LAST: With an alloy steel body, this directional control 4-way valve is highly corrosion resistant and withstands even melting temperatures. It is extremely ductile and can outlast other similar products available in the market..
  • EASE OF USE: With a joystick control in tow, our hydraulic joystick valve offers a single push-pull and up-down control on all valves. It cuts down the force feedback from the system to the operator..
Check Stock

Chief Directional Control Valves 1 Spool 4 Way 4 Position - Hydraulic Directional Control Valve with Spring Center - 25 GPM, 1/2\ NPT Work Port, 3/4\ NPT Outlet Port, 3000 PSI, 16 lb, 220572

  • SPECIFICATIONS: The Chief P40 manual Directional Control Valve for hydraulic systems has a 4 way, 3 pos tandem center with 10 GPM, maximum working pressure of 3625 PSI, temperature of 176°F, standard SAE 8/10 inlet/outlet ports. It weighs 9.4 lb..
  • FAST ACTING: Our 4 way hydraulic control valve has 4 ports that facilitate super fast extension and retraction of double-acting hydraulic cylinders, producing sufficient pressure required in a wide range of applications..
  • PRECISE: This directional control valve hydraulic has a two spool construction equipped with lands and undercuts. The precision machined construction allows the spools to open and close fluid flow paths effortlessly with high accuracy every time..
  • EFFICIENT: Our 3 pos, hydraulic directional control valve allows the hydraulic fluid back into the tank without forcing it over the relief valve, reducing heat generation and a buildup of backup pressure..
  • MULTIPURPOSE: The P40 hydraulic valves are extremely versatile and can perform several functions in their central position - they can easily unload hydraulic pumps, stop, allow, or change the direction of fluid flow in hydraulic circuits. Power beyond and closed center plugs may be added and are sold separately..
Check Stock

VEVOR Bag Air Jack 11000lbs Capacity Pneumatic Jack Quick Lift 5T & Mophorn Pneumatic Jack 3 Ton Triple Bag Air Jack Lifting Height Pneumatic Air Jack 6600LBS Capacity Extremely Fast Lifting Action

  • Product 1: Labor-Saving Jack: The pneumatic jack capacity: 11000 lbs/5T. Minimum height: 5.7"/ 145 mm. Maximum height: 15.75"/400 mm. It only takes 5 seconds to lift. Working Temp: -60℃~ 50 ℃. Air inlet: G1/4. Our triple bag jack is the easiest and fastest way to make the car lifted..
  • Product 1: Heavy Duty Construction: Our pneumatic jack is built with high-strength steel that makes the whole body sturdy and durable. The powder-coated steel frame and rubber match to reduce impact. Highly sealed airbags will not leak or be scratched. A larger stressed area fits on a soft and easy-collapsing place..
  • Product 1: Secure Usage: First, keep the red valve closed, open the green valve, and input the compressed air.
  • when inflating to the height, turn off the green valve. After use, open the red valve to bleed off air. The safety valve in the middle ensures the injected gas is not excessive to ensure the security of the use process..
  • Product 1: Space-saving Design: Carrying handle design fits the shape of the hand, so you can fully control the jack when you use it. And the whole structure is compact and easy to store. So you can take it outdoors conveniently..
  • Product 2: Labor-Saving Jack: Pneumatic jack capacity: 6600 lbs/3T. Minimum height: 5.3"/135 mm. Maxim....
Check Stock

Sandblaster Gun Sandblasting Cabinet Foot Valve Sand Blasting Media Kit Sand Blaster Machine Accessories

  • 【Sandblasting Gun】Specially used for polishing, painting and sanding various dead ends of light metals and small metals, rough edges and rusty details, as well as paint peeling, tiles, car surface treatment, glass etching, etc..
  • 【Foot Switches】1/4"NPT Pneumatic Foot Pedal Valve Kit 3 Way 2 Position Threaded Rubber Nonslip Pressure Control with 6mm Pneumatic Fittings..
  • 【Material 】Made of aluminum alloy, the foot pedal eliminates hand fatigue and adds more precise control over the flow of sandblasting media. The kit allows you to blast for longer periods of time without having to take breaks due to hand fatigue..
  • 【Support a variety of sandblasting media】. Suitable for (46-240#) purpose non-metal sandblasting media, baking soda or glass beads, sodium bicarbonate, silica, walnut, garnet, etc. Please make sure to use the correct abrasive for your project..
  • 【Package specifications】Sandblasting gun*1, ceramic nozzle*1, pneumatic foot valve*1. Tips. Please wear gloves and other protective equipment to ensure safe operation, and please do not point the sandblasting gun at people or animals..
Check Stock

Chief G Series P80 Hydraulic Directional Control Valves - Hydraulic Speed Control Valve - 3 Spool, 21 GPM, 4 Way 3 Pos Spring Center, SAE 10 Inlet and Work Ports, SAE 12 Outlet Ports, 3625 PSI

  • Durable - The hydraulic directional control valve is a cast-iron structure, which can be used for a long time.
  • 5 Spool Hydraulic Valve - The hydraulic valve can manage and guide the flow of hydraulic oil between hydraulic pumps and hydraulic cylinders, motors, tanks, and more.
  • Double Acting - This control valve comes with 5 spools and SAE O-ring in/out ports. All spools are standard double-acting spools, which are very suitable for double-acting cylinders.
  • High Efficiency - The relief valve range is up to 3600 PSI and the maximum flow is up to 13 GPM.
  • Widely Used - The hydraulic directional control valve is very suitable for small tractors, tractor loaders, fellers, forklift environmental vehicles, light loaders, log splitters, and more.
Check Stock

120L Small Construction Drum Mixer, 220V Mortar Concrete Mixer Concrete Construction Site Multifunctional Electric Mixing Tool

  • It is the best choice for open liquid drums. The mixer is easily clamped to the side of the bucket and the chucking angle can be adjusted. A good mixing effect can be achieved, and the forward steering gear can be attached to the mixer.
  • Environmentally friendly pneumatic mixer products are widely used in food, aerospace manufacturing, shipbuilding, home appliances, painting, food industry, medical and other related industries.
  • Can start, stop, and turn right at any time. It can be started, stopped, and instantly turned by the simple control of the directional valve.
  • The load is safe, and can be automatically decelerated or stopped for the corresponding changes, and can be automatically recovered when the load is reduced.
  • Service: If your item arrived damaged or defective or if you received the wrong product or the item is not working according to its technical spec ,you can contact us to deal with it.
Check Stock

CROSS Manufacturing SBAF2J 143430 SBA Series Cast Iron Double Spool Monoblock Hydraulic Directional Control Valve with joystick, 1st Spool 4-Position Float, 2nd Spool 3-Position, Open Centered, 3/4\ x 3/4\ x 1/2\ NPT Female, 2500 psi, Grey

  • Durable - The hydraulic directional control valve is a cast-iron structure, which can be used for a long time.
  • 2 Spools Hydraulic Valve - The hydraulic valve can manage and guide the flow of hydraulic oil between hydraulic pumps and hydraulic cylinders, motors, tanks, and more.
  • Double Acting - This control valve comes with 2 spools and #8 SAE O-ring in/out ports. All spools are standard double-acting spools, which are very suitable for double-acting cylinders.
  • Widely Used - The hydraulic directional control valve is very suitable for small tractors, tractor loaders, fellers, forklift environmental vehicles, light loaders, and more.
  • Max Pressure: 3600 PSI, Inlet Port: SAE 10, Outlet Port: SAE 12, Working Ports: SAE 10, Fluid Temperature: 5 to 176℉, Valve Type: 4 way 3 positions, Mounting: 3 bolts m8 needed.
Check Stock

Hydraulic Loader Directional Control Valve LV22RFSTKAB Joystick Regen - 10GPM 4000PSI

  • SPECIFICATIONS: Our 2 spool directional control valve for double-acting hydraulic rams has 21 GPM, 3 position spring center and 4 positions, SAE 10 inlet and work ports and SAE 12 outlet ports. This hydraulic flow control valve has 4-way valving, adjustable 1500 with 3625 PSI..
  • VERSATILE: This G series P80 DCV has a 3 position spring center and 4 positions that allows an actuator to open and close. This 2 spool control valve can be used in any hydraulic circuit..
  • PRECISE FLOW: Simple and compact, the hydraulic joystick valve has one spool with a 21 GPM flow rate that precisely controls the direction of the flow of hydraulic fluids. This plow valve has a wide range of applications, including in log splitters..
  • MANUAL CONTROL: This high-pressure control valve comes with a joystick lever actuator for controlling the spool. You can control the log splitter valve manually, without an external, additional control system..
  • TANDEM CENTER: This adjustable relief valve is equipped with a spring tandem center. Since the fluid directly flows back to the hydraulic tank the hydraulic orbit motor prevents overheating and reduces noise during operation..
Check Stock

VEVOR Hydraulic Directional Control Valve, 1 Spool Hydraulic Spool Valve, 21 GPM Hydraulic Loader Valve, 3600 PSI Directional Control Valve, Hydraulic Valves And Controls For Tractors Loaders Tanks

  • [DOUBLE ACTING]- 1 Spools monoblock for double acting cylinders. Hydraulic control valve for operating double acting cylinders..
  • [Control method]- The valve has a variety of control methods, including manual control, pneumatic control, hydraulic and electric control options..
  • [DURABLE QUALITY]- Come with 1 spools with Joystick Control, 11 GPM Flow, 3600 Max PSI..
  • [SPRING RETURN]- All spools standard come with spring return, which can return to the neutral position..
  • [WIDELY USED]- This valve is widely used in hydraulic systems of construction machinery such as forklifts, sanitation vehicles, small loaders, etc..
Check Stock

Tolsous 1 Spool Directional Control Valves 11 GPM 3600 PSI MAX High Pressure Integral Valve Double Acting for Small Tractors Tractors Loaders Log Splitters

  • SPECIFICATIONS: Our 3 spool directional control valve for double-acting hydraulic rams has 21 GPM, 4-way 3 pos spring center, SAE 10 inlet and work ports and SAE 12 outlet ports. This hydraulic flow control valve has 4-way valving, adjustable 1500 with 3625 PSI..
  • VERSATILE: This G series P80 DCV has a 3 position, 4-way valving that allows an actuator to open and close. This 3 spool control valve can be used in any hydraulic circuit..
  • PRECISE FLOW: Simple and compact, the hydraulic joystick valve has one spool with a 21 GPM flow rate that precisely controls the direction of the flow of hydraulic fluids. This plow valve has a wide range of applications, including in log splitters..
  • MANUAL CONTROL: This high-pressure control valve comes with a joystick lever actuator for controlling the spool. You can control the log splitter valve manually, without an external, additional control system..
  • TANDEM CENTER: This adjustable relief valve is equipped with a spring tandem center. Since the fluid directly flows back to the hydraulic tank the hydraulic orbit motor prevents overheating and reduces noise during operation..
Check Stock