Reviews Plate Hanger Disc

40 Pieces Invisible Adhesive Plate Hanger Round Vertical Plate Holder Self-Adhesive Wall Plate Hanger Self-Adhesive Wall Dishes Hook Rubber Plate Wall Hanger for Bathroom Kitchen Department Office

  • You will get: you will receive 30 pieces of invisible adhesive plate hangers including 10 pieces of big invisible triangle hooks, 10 pieces of small invisible plate hangers, and 20 pieces of round wall plate hangers, and enough quantities are enough for you to meet your various applying demands.
  • Serviceable material: these vertical plate holders are made of plastic, which is wear resistant, lightweight, safe, reusable, and not easy to deform or break, and features exquisite craftsmanship, can support you for a long service time.
  • Strong self-adhesive feature: this vertical wall dish hook adopts adhesive features, which can be firmly fixed on the wall or other smooth surfaces, and not easy to fall off, can bring you much convenience and can bring you nice visual enjoyment.
  • Wide applications: you can use our invisible adhesive plate hanger in most places, such as bathroom, kitchen, office, living room, or other places, and you can stick it into the wall, refrigerator, door, or flat surface, and so on, which can be a nice housework accessory for you.
  • Suitable sizes: each style of invisible adhesive hanger is designed in different sizes, the big adhesive plate hanger is about 3.2 x 3.2 cm/ 1.25 x 1.25 inch, the round self-adhesive plate holder is about 2.5 x ....
Check Stock

SR Performance Clutch Alignment Tool; 10 Spline

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 1-3/4 inch O.D. shaft, 1 inch pilot, 10 splines.
Check Stock

Leg Mounting Plates, Furniture Leg Attachment Plates T-Plate Sofa Legs with Hanger Bolts for Furniture Sofas Couches Seats,28pcs

  • Furniture repairing replacement: this furniture leg mounting plate can attach legs to new or damaged sofas, couches, seats, ottomans, etc..
  • Application: these plates can be applied to repair the furniture when the sofa are damaged and missed the threaded nut, or the T-nuts have wiggled loose and won't stay in place.
  • Industrial standard: 4 pcs of 49 x 49 mm /2" x 2" T-Plate, 4 pcs of 5/ 16" (M8) hanger bolts, 4 pcs of 5/ 16 inch (M8) female converters,16 pcs of screw adapters for 5 mm unthreaded holes.
  • Easy installation: no need to purchase compatible hanger bolts and the other screws, you can raise the height of your sofa to replace the legs screw with this matched item.
  • The hanger bolt hole are beveled so that the provided hanger bolt will fit well with the mounting plate.
Check Stock

Dorman 14505 Clutch Alignment Tool Compatible with Select Models

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 3.6 inches long.
Check Stock

TANOSII Foldable Purse Hook Floding Handbag Hanger Bling Rhinestone Bag Holder for Table Desk 1 PCS White

  • Foldable handbag hook foldable handbag hanger purse hook purse hook for table handbag hanger for table handbag hanger hook hanger for purse on table purse table hanger hook table handbag holder table hook purse holder purse table holder hook.
  • Material: Our purse hooks are made of zinc alloy and color rhinestone series, the disc of handbag hanger is made of anti-slip rubber which can prevent it from slipping on smooth or hard surfaces..
  • Size: 4.35 x 4.35 x 1.4 cm / 1.7 x 1.7 x 0.55 inch. The diameter of the crystal is 1.3 inch.This kind of long purse hook can bear 11 lbs the most..
  • Avalible thickness: Our table handbag holder should be used on the table within 1.97 inches..
  • Easy to take: The handbag hanger hook is lightweight and foldable that can be taken to everywhere easily.You can use it to keep your bag clean and safe beside you.It's a good choice for daily use..
Check Stock

Btibpse Legs Mounting Plates, Furniture Leg Hanger Bolts, Sofa Legs Attachment Plates Kit for Sofa Table Couches Leg T-Plate 5/16\ (M8)

  • Package included: 4 Pcs T-Plate, 4 Pcs 5/16 inch (M8) hanger bolts, 4 Pcs 5/16 inch (M8) female converters, 16 Pcs screw adapters for 5mm unthreaded holes..
  • Beveled hanger bolts hole: the hanger bolt hole are beveled so that the provided hanger bolt will fit well with the mounting plate.
  • Application: these plates can be applied to repair the furniture when the sofa are damaged and missed the threaded nut, or the T-nuts have wiggled loose and won't stay in place.
  • This furniture leg attachment plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more..
  • Easy installation within minutes: no need to purchase compatible hanger bolts and the other screws, you can raise the height of your sofa to replace the legs screw with this matched item.
Check Stock

ClutchXperts SPC Clutch Alignment Tool KIT Compatible With 2006-2015 Mazda MX-5 Miata 2.0L 6-Speed

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 7.3 inches long.
Check Stock

DAN SPEED Invisible Adhesive Plate Hanger, 40/80 Pieces Vertical Plate Holders for Wall Hooks for Decorative Plates and Art Supplies 1.25 Inch (80pcs)

  • Package includes: You will get 40/80 pieces DAN SPEED invisible adhesive plate hangers, enough for your daily use and replacement.
  • Wide Applications: These DAN SPEED plate hangers fit for decorative plates, antique china, antique plates, art, photo and so on, which can make your house look more beautiful and more artistic..
  • Self-adhesive design: These DAN SPEED invisible vertical plate holders with adhesive back design, can fix firmly on the wall or other smooth surface, and not easy to fall off.
  • Size information: Our invisible adhesive plate hanger the size of the vertical plate holder is 1.25 x 1.25 inch/ 3.2 x 3.2 cm, which can hold up to 1.5 pounds, and the diameter of the board is up to 10 inches.
  • You can use 2 or more hangers to store heavier items..
  • Material: The adhesive plate hanger is made of quality ABS material, durable and reusable.
Check Stock

Metal Plate for Phone Magnet, 8 Pack Replacement Magnet Disc Magic Mount Plate with Adhesive Backing for Socket Grips & Magnetic Car Holder Cradle Stand(Dashboard/Vent/CD Slot/Windshield) - Round

  • 【Work with various magnetic mounts】 Phone metal plate for magnetic mount is NOT magnetized, and they need to use with magnetic car holders. Adhesive metal plates are attachable to automobile magnetic phone mounts. 8 pack genius circular magnet plate for phone can go with multiple devices. Phone mount plate disc laminated cellphone allows you to place on smartphone horizontal or vertical under the magnetism between magnets and iron disk piece..
  • 【For Socket Grip Stands】 Socket grips is NOT included! Small metal plate of circle two size for both mobile phone magnet vehicle mounts and socket grips. Rose gold thin metal phone plates are pretty accurate size for collapsible sockt, to hidden inside openable socket top whose cap can take apart/assemble easily. Bigger black mount metal plate can attach perfectly on the regular flat swappable expanding socket's pattern surface..
  • 【3M Adhesive Backing】 Metal disc with premium strong stickiness double-sided 3M adhesive backer, so self adhesive suit all magnetic mobile phone magicmount. Please place 3M metal plate sheet on the phone away from wireless charger sensor. Or apply mount metal plate to phone case, and remove case while charging. Magnet mettallic disc won't fall of on rugged and bumpy road once....
Check Stock

Hyever Table Sofa Furniture Leg Mounting Plate with Hanger Bolts Attachment T Plate,Pack of 4

  • Good quality galvanized iron mounting plate designed for new or damaged sofa legs and couches,table,ottomans,etc.
  • Can be used repairing the sofa or other furniture when they are damaged, missed the threaded nut or the T-nuts have wiggled loose.
  • Mounting plate include hanger bolts and mounting screws. You can easy to installation and fix you furniture legs use them.
  • 2mm thickness attachment plate connect the furniture legs firm, you don't worry about them getting loose.
  • The hanger bolts can screwed into the leg of the furniture and not need the female converters screw.
Check Stock