Reviews Plate tube Type Condenser

The Distillery

  • Sufficient Capacity: Alcohol still machine owns 9. 6 us gal real capacity, able to distill 38 liters of raw material by heating to selectively boil and then cooling to condense the vapor. Boiler barrel: 13. 8" X 15. 7" (35 x 40 cm). condenser: 7. 9" X 5" (20 x 13 cm). thumper: 7" X 4. 3" (18 x 11 cm). all parts are made of food grade material including silicone, stainless steel and copper..
  • Speedy Cooling: This water Distiller adopts open-type cooling method, copper coils with rapid thermal conductivity assures promising cooling performance together with large contact area with the coolant, providing a rather low temperature of distilled product. Upgraded with two kegs (thumper and condenser), perfect for adding flavors to your product! Circulating water pump attached to save cooling water. Rubber pads under condenser insulates heat and quickens cooling..
  • Convenient Usage: Precise thermometer with double display of Celsius and Fahrenheit on the lid for easy monitoring of wine temperature during distillation process. Circulating water enters through lower inlet and drains from upper outlet for efficient cooling..
Check Stock

Laboy Glass Liebig Condenser with 24/40 Joints 300mm in Jacket Length Used in Reflux or Distillation Aapparatus Chemistry Lab Glassware with 10mm Glass Hose Connections

  • SIMPLE DESIGN EASY SETUP----The liebig condenser is the most basic water-cooled condenser,also named “water condenser”,which consists of an inner straight tube surrounded by an outer jacket tube,the cool water flows through the outer jacket to condensate the vapor in the inner tube,having a better cooling performance than air condenser..
  • COMMONLY USED ----A liebig condenser commonly used in a distillation apparatus,also in reflux process and soxhlet extraction can be placed in vertical and oblique position as a reflux condenser and a distillation condenser.As jointed glassware part,it is usually used with a round bottom flask,a three way distillation adapter,a take off adapter to assemble a distillation or reflux setup..
  • DIMONSIONS----It is designed with 24/40 standard taper joint at top and bottom,and two glass hose connectionsconnecting the inner tube through which coolant flows,the lower hose used for coolant inlet,and the higher hose used for coolant outlet.With the jacket length of 300mm.
  • HIGH QUALITY---Laboy glass condensers are all made of high quality boroslicate glass according to ASTM E438,heavy wall design,durable and reusable.The ground joints are precisely grounded according to US standard..
  • BUY WITH CONFIDENCE----100% 90 DAY MONEY ....
Check Stock

Laboy Glass Allihn Condenser Reflux for Soxhlet Extractor with 55/50 Joint 300mm in Jacket Length 405mm Overall Height Distillation Apparatus Organic Chemistry Lab Glassware

  • This is a special allihn condenser only with 34/45 bottom male joint inserting to a soxhlet extractor body ,the size is larger with an inner tube consisting of a series of bulbs which increase the surface area availiable for vapor condensation surrounded by an outer jacket tube.This design can improve the cooling performance,in practise, the allihn condenser can be replaced by a liebig condenser, coiled condenser,dirmoth condenser or graham condenser used as a reflux condenser..
  • In a soxhlet extraction apparatus, this allihn condenser with lower male joint attached the soxhlet extractor body cools the solvent vapour from the boiling flask and drips back down into the thimble containing the solid material. With 10mm O.D.hose connections at top and bottom accommodating 8mm I.D.rubber tubing,the cool water flows in from the lower hose ,and flows out from the upper hose..
  • The glass allihn condenser is with 55/50 male joint, 300mm in jacket length 405mn overall height.
  • Laboy glass ware are all made of high quality boroslicate glass according to ASTM E438,heavy wall design,durable and reusable.The ground joints are precisely grounded according to US standard..
  • 100% 90 DAY MONEY BACK GUARANTEE If you are not satisfied for any reason, simply return for a fu....
Check Stock

DADAKEWIN 400mm Friedrich Condenser, Joint 24/40, Borosilicate 3.3 Glass Standard Ground Mouth Heat Resistant Heavy Duty Scientific Lab Condensers- Pack of 1 (Size : 400mm/24 * 40)

  • Packing: 1 piece/pack, 400mm Friedrich Condenser, Joint 24/40, Standard Ground Mouth.
  • Heavy duty design, reusable, ground glass joints allow precision connection to jointed glassware..
  • Premium Materials: Lab Friedrich Condenser is made from Borosilicate 3.3 Glass materials, which has a very low coefficient of thermal expansion, about one-third of ordinary glass. Resistant to high temperature and Resistant to 200 ° C temperature change..
  • Friedrich Condenser's inner core tube is a water condenser which two glass tubes are tightly intertwined into a spiral, which increases the length of the inner core tube and expands the cooling area. the steam is passed through the outside of the inner tube, which is not only cooled by water, but also by natural air. the cooling effect is better, and it is suitable for backflow..
  • Great for Professional Laboratories, Classrooms & Household.
  • Superior chemical durability and heat tolerance. Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use..
Check Stock

DADAKEWIN 500mm Friedrich Condenser, Joint 24/40, Borosilicate 3.3 Glass Standard Ground Mouth Heat Resistant Heavy Duty Scientific Lab Condensers- Pack of 1 (Size : 500mm/24 * 40)

  • Packing: 1 piece/pack, 400mm Friedrich Condenser, Joint 29/29, Standard Ground Mouth.
  • Heavy duty design, reusable, ground glass joints allow precision connection to jointed glassware..
  • Premium Materials: Lab Friedrich Condenser is made from Borosilicate 3.3 Glass materials, which has a very low coefficient of thermal expansion, about one-third of ordinary glass. Resistant to high temperature and Resistant to 200 ° C temperature change..
  • Friedrich Condenser's inner core tube is a water condenser which two glass tubes are tightly intertwined into a spiral, which increases the length of the inner core tube and expands the cooling area. the steam is passed through the outside of the inner tube, which is not only cooled by water, but also by natural air. the cooling effect is better, and it is suitable for backflow..
  • Great for Professional Laboratories, Classrooms & Household.
  • Superior chemical durability and heat tolerance. Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use..
Check Stock

DADAKEWIN 500mm Friedrich Condenser, Joint 24/29, Borosilicate 3.3 Glass Standard Ground Mouth Heat Resistant Heavy Duty Scientific Lab Condensers- Pack of 1 (Size : 500mm/24 * 29)

  • Packing: 1 piece/pack, 400mm Friedrich Condenser, Joint 24/29, Standard Ground Mouth.
  • Heavy duty design, reusable, ground glass joints allow precision connection to jointed glassware..
  • Premium Materials: Lab Friedrich Condenser is made from Borosilicate 3.3 Glass materials, which has a very low coefficient of thermal expansion, about one-third of ordinary glass. Resistant to high temperature and Resistant to 200 ° C temperature change..
  • Friedrich Condenser's inner core tube is a water condenser which two glass tubes are tightly intertwined into a spiral, which increases the length of the inner core tube and expands the cooling area. the steam is passed through the outside of the inner tube, which is not only cooled by water, but also by natural air. the cooling effect is better, and it is suitable for backflow..
  • Great for Professional Laboratories, Classrooms & Household.
  • Superior chemical durability and heat tolerance. Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use..
Check Stock

DADAKEWIN 300mm Friedrich Condenser, Joint 24/29, Borosilicate 3.3 Glass Standard Ground Mouth Heat Resistant Heavy Duty Scientific Lab Condensers- Pack of 1 (Size : 300mm/24 * 29)

  • Packing: 1 piece/pack, 300mm Friedrich Condenser, Joint 24/29, Standard Ground Mouth.
  • Heavy duty design, reusable, ground glass joints allow precision connection to jointed glassware..
  • Premium Materials: Lab Friedrich Condenser is made from Borosilicate 3.3 Glass materials, which has a very low coefficient of thermal expansion, about one-third of ordinary glass. Resistant to high temperature and Resistant to 200 ° C temperature change..
  • Friedrich Condenser's inner core tube is a water condenser which two glass tubes are tightly intertwined into a spiral, which increases the length of the inner core tube and expands the cooling area. the steam is passed through the outside of the inner tube, which is not only cooled by water, but also by natural air. the cooling effect is better, and it is suitable for backflow..
  • Great for Professional Laboratories, Classrooms & Household.
  • Superior chemical durability and heat tolerance. Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use..
Check Stock

DADAKEWIN 300mm Friedrich Condenser, Joint 24/40, Borosilicate 3.3 Glass Standard Ground Mouth Heat Resistant Heavy Duty Scientific Lab Condensers- Pack of 1 (Color : 300mm/24 * 40)

  • Packing: 1 piece/pack, 300mm Friedrich Condenser, Joint 24/40, Standard Ground Mouth.
  • Heavy duty design, reusable, ground glass joints allow precision connection to jointed glassware..
  • Premium Materials: Lab Friedrich Condenser is made from Borosilicate 3.3 Glass materials, which has a very low coefficient of thermal expansion, about one-third of ordinary glass. Resistant to high temperature and Resistant to 200 ° C temperature change..
  • Friedrich Condenser's inner core tube is a water condenser which two glass tubes are tightly intertwined into a spiral, which increases the length of the inner core tube and expands the cooling area. the steam is passed through the outside of the inner tube, which is not only cooled by water, but also by natural air. the cooling effect is better, and it is suitable for backflow..
  • Great for Professional Laboratories, Classrooms & Household.
  • Superior chemical durability and heat tolerance. Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use..
Check Stock

DADAKEWIN 400mm Friedrich Condenser, Joint 24/29, Borosilicate 3.3 Glass Standard Ground Mouth Heat Resistant Heavy Duty Scientific Lab Condensers- Pack of 1 (Size : 400mm/24 * 29)

  • Packing: 1 piece/pack, 400mm Friedrich Condenser, Joint 24/29, Standard Ground Mouth.
  • Heavy duty design, reusable, ground glass joints allow precision connection to jointed glassware..
  • Premium Materials: Lab Friedrich Condenser is made from Borosilicate 3.3 Glass materials, which has a very low coefficient of thermal expansion, about one-third of ordinary glass. Resistant to high temperature and Resistant to 200 ° C temperature change..
  • Friedrich Condenser's inner core tube is a water condenser which two glass tubes are tightly intertwined into a spiral, which increases the length of the inner core tube and expands the cooling area. the steam is passed through the outside of the inner tube, which is not only cooled by water, but also by natural air. the cooling effect is better, and it is suitable for backflow..
  • Great for Professional Laboratories, Classrooms & Household.
  • Superior chemical durability and heat tolerance. Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use..
Check Stock

DADAKEWIN 300mm Friedrich Condenser, Joint 29/29, Borosilicate 3.3 Glass Standard Ground Mouth Heat Resistant Heavy Duty Scientific Lab Condensers- Pack of 1 (Size : 300mm/29 * 2)

  • Packing: 1 piece/pack, 300mm Friedrich Condenser, Joint 29/29, Standard Ground Mouth.
  • Heavy duty design, reusable, ground glass joints allow precision connection to jointed glassware..
  • Premium Materials: Lab Friedrich Condenser is made from Borosilicate 3.3 Glass materials, which has a very low coefficient of thermal expansion, about one-third of ordinary glass. Resistant to high temperature and Resistant to 200 ° C temperature change..
  • Friedrich Condenser's inner core tube is a water condenser which two glass tubes are tightly intertwined into a spiral, which increases the length of the inner core tube and expands the cooling area. the steam is passed through the outside of the inner tube, which is not only cooled by water, but also by natural air. the cooling effect is better, and it is suitable for backflow..
  • Great for Professional Laboratories, Classrooms & Household.
  • Superior chemical durability and heat tolerance. Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use..
Check Stock