Reviews Plastic Union Ball Valve

Guardian G1643 ABS Plastic Emergency Shower, Horizontal Mounted

  • Application: Emergency shower for horizontal mounting.
  • Shower Head: 10" diameter orange ABS plastic.
  • Valve: 1" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon seals. Furnished with stainless steel actuating arm and 29” stainless steel pull rod.
Check Stock

DAN SPEED 1.5 NPT Female Threaded Full Port Ball Valve with Blue Vinyl Lever Handle,316 Stainless Steel,WOG1000

  • Body & Ball Type:Full Port, Low Operation Torque,Temp Range:-60F to 450F.
  • The valve is fitted with PTFE seals for maximizing corrosion resistance and lifespan of the ball valve.
  • This ball valve is made of Stainless Steel 316 and has a plastic-covered lever handle for on/off manual control.
  • Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas. Fluid Medium:For use with liquids and gases.
  • This inline valve has a Standard port flow and 1.5" female National Pipe Taper (NPT) threads for connecting two male threaded pipe fittings going in....
Check Stock

75mm IBC Tote Tank Adapter Ball Valve, IBC tote valve, 2.95' Coarse Thread Tote IBC Ball Valve Connector Replacement for IBC Tote Water Liquid Container

  • 【WIDE USAGE】— 75mm IBC Tote Adapter is suitable for plastic container outlet control to prevent liquid from splashing around. Widely used in chemical process and acid, liquid storage buckets, tanks, container outlet control valves..
  • 【IBC TOTE ADAPTER】— This IBC tote tank adapter ball valve is made of high-density polyethylene and plastics, which is acid resistance, alkali resistance, corrosion resistance, high mechanical strength, and durable to use..
  • 【NO LEAK】— IBC tote fittings with inner diameter input end diameter 75mm, pitch: 0.19″ (5mm).
  • 60mm/2.36″ diameter for suitcase drain cover, liquid storage buckets, and tanks outlet control valves to prevent liquid leakage..
  • 【EASY TO INSTALL】— 2.95″ coarse thread tote ball valve is easy to install, just need to connect to the water tank to use, equipped with silicone gasket and raw material tape to enhance sealing..
  • 【PACKAGE INCLUDED】 — Purchase IBC tank drain adapter from Catilon, you can get 2.95’’ IBC adapter ball valve, IBC A200-S60*6(mm) + IBC tote valve cover + spout cap + silicone gasket (NOTE: Please carefully check the size of the IBC Tote Ball Valve before purchasing). Please confirm the thread diameter of your IBC tank adapter is 60mm..
Check Stock

2Pcs Brass Float Valve 1/2" Supply Tube Automatic Fill Water Adjustable Float Ball Valve with Adjustable Arm Water Float Valve for Livestock Waterer, Aquariums,Ponds, Aquaculture, Hydroponics

  • PACKAGE INCLUDED: You will receive 2 pieces water float ball valves and 1 roll plumber's tape..
  • PRINCIPLE of OPERATION: The float valve could control the flow rate and opening and closing of the inlet pipe through the floating of the ball. When the water level rises to a certain level, the water injection will be cut off.
  • when the water level drops to a certain limit, the water is automatically injected..
  • APPLICATION: The float valve is suitable for water storage tanks, pools, aquariums, fish tanks, livestock sinks, aquaculture, etc. 1/2" male thread inlet, suitable for most types of water pipes, easy to install and adjust..
  • HIGH QUALITY MATERIAL: The arm and connector of water float ball valve is made from high quality brass and the float ball body is made from plastic..
  • AFTER-SALES SERVICE: The float ball valve can only work properly if the water pressure is appropriate. We promise to provide every customers with satisfying shopping experience. If you come across any issues during use our products, please feel free to contact us..
Check Stock

True Union Ball Valve 1-1/2" with Full Port (2-Pack), UPVC Full Flow Ball Valve - U.S. ASTM EPDM O-Rings and Reversible PTFE Seats, Rated at 230 PSI

  • Higher PSI - Sealed with higher quality ASTM EPDM O-Rings and engineering plastic powder. So our ball valve can withstand a higher pressure(230 PSI) than general products(150-200 PSI)..
  • High Cost Performance: Pack of 2 full flow ball valve are highly cost-effective, and this premium ball valve can be used for many years, reduce your post-maintenance costs..
  • Full Port - The best full flow ball valve for your water project. Provide excellent performance in water engineering, pipeline facilities, agricultural irrigation, swimming pool and other commercial pipeline systems..
  • Easy to Operate and Install - The smooth inner sphere makes the handle easy to rotate. Perfect match with PVC pipe 1 1/2 inch Sch40. standard..
  • Perfect Sale After Service - We provide online service at any time. If there is any problem with the product, we can return or exchange the goods unconditionally or refund your full amount..
Check Stock

Habitech 2-Pack In-Line Barbed Ball Valve 13mm For 1/2 Inch Tubing .520 ID - Regulate and Shut-Off/On Water Flow

  • ...ual dripline control, use as tank valves, drain valves, return valves or in any situation where fluid restriction is needed. For use with irrigation, aquarium plumbing, pump return line, saltwater applications, RV camper and trailers, pex tubing, hydroponics, and aquaponics..
  • Leak-Free Seal: These non-corrosive plastic flow valve fittings are guaranteed to provided a secure, watertight connection that handles an operating pressure of up to 45 PSI. Constructed to be wear-resistant to assure long term reliability of connections. Confidently install these barbed fittings without clamps by using our Valve Sizing Chart (see photo) to get the perfect fit. Match the ID (Inner Diameter) of your hose or tube with the acceptable IDs listed on the chart..
Check Stock

ROYHOO 4PCS 1/2 Inch Float Ball Valve Plastic Water Float Valve Mini Plastic Float Valve with Adjustable Arm for Automatic Water Level Control of Water Tank

  • Material: the body of the body is made of quality ABS plastic material, which is featured with good heat resistance and impact resistance of PC resin, not corrode or rust. The float is made of PE material with nice stability. The valve core is made of silicone material which is non-toxic and odorless, safe for you to use..
  • Easy to use: you can have a automatic water level control by adjusting the angle which is formed by the float and the valve body, if the surface of water contacts the float, the water inlet switch will be automatically closed..
  • Quantity and measurement: we provide you with a total of 4 pieces 1/ 2 inch float ball valves, the valve total length is approx. 7.87 inch and a float length is about 3.74 inch, you can install different numbers of the water valves according to the size of the tank or pool..
  • Suitable condition: the float ball valve can be adapted to water temperature which ranges from 0 to 70 degrees Celsius, 0.01-0.8MPA water pressure is applicable, featuring with good control of the water inlet, will give a nice using experience to you..
  • Multifunction: our plastic water filter float ball valves are suitable for a variety of occasions, such as small swimming pools and storage tanks at home, more numbers of water valves should b....
Check Stock

Showerhead Shut Off Valve with Stainless Handle 304 Stainless Steel Mini Ball Valve 1/2 Female X Male NPT Thread Water Flow Control Valve Regulator Chrome Shower Head Flow Control Valve 1

  • FITMENTS: 1/2'' standard connections, NPT- female and male, compatible with the most common showerhead connectors in the North America..
  • FUNCTIONS: This stainless steel ball valve use as showerhead shut off valve, RV shower shut off valve or water saving adjustable valve, which also widely used at home, bathroom, kitchen, RV, Motorhome, etc..
  • RELIABLE & LEAKPROOF: This shower shut off made by one piece construction and has a blow-out proof stem to reduce leakage and valve damage. The maximum operating temperature of this shower on off valve is 325 degrees F..
  • DURABLE MATERIAL: This shower head shut off valve made of 304 stainless steel body and ball with much higher performance (high heat-resistance, high corrosion resistance and pressure-resistance), more durable and harder than the ordinary Brass and Plastic one. Stainless steel valve cartridge can be operated up to 250 000 times switching cycles..
  • EASY TO USE: A long stainless handle and on/ off switch with quarter are designed on this shower shut off valve, which made the nozzle easy to turn and control the water flow easily!.
Check Stock

COOLWHEEL Bicycle Presta and Schrader Valve Adapter - 15 Pcs Bike Brass DV AV SV Tire Valve Inflator Adapters Set,Ball Pump Needle Inflation Devices & Accessories for Bike Tire Air Compressor

  • PREMIUM QUALITY - These valve adapters are made of solid brass & ABS plastic with threads,the rubber ring gasket will not leak easily, which is strong and durable for long term of use..
  • PORTABLE TO CARRY - The valve adapters take up very little space and very convenient to carry. You can place them in any backpack or pockets when riding and will not easy to lose..
  • EASY TO USE - Convenient to install and use, kids can also use the tapered nozzle for inflatable toys and balloon easily.These are ideal daily tool for most family to bike tire valve pumping, sport balls and other inflatable equipment..
  • VALVE ADAPTOR KIT - The 15 Pcs various sizes and specifications of bike inflator pump kit including 6 x DV/SV bike tire valve adapters, 2 x AV valve adapters, 2 x SV valve adapters, 2 x ball pump metal needles, 1 x solid brass tapered inflatable nozzles, 2 x black ABS tapered inflatable nozzles..
  • WIDE APPLICATION - These are suitable for mountain bikes, road bikes and stationary bicycles with Presta valve tubes, also can be used for inflatable toys, swim ring, balloons, sport balls such as basketball, football, volleyball, rugby, yoga ball,etc..
Check Stock

DERNORD Stainless Steel Ball Valve 1PC Type 0.25\ NPT Standard Port for Water, Oil, and Gas (1/4 Inch Ball Valve)

  • Serviceable Stainless Steel Ball Valve - Can be taken apart via threads, Threaded Connector Type Female to Female 1/4 Inch NPT.
  • Stainless Steel 1PC Ball Valve Handle: Handle with blue vinyl insulation.
  • Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F.
  • Stainless Steel 1PC Ball Valve Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas,.
  • NOTE: DERNORD 1PC Type Ball Valve Standard Port is not full port type, the size we marked is only the thread size this ball valve fits. If you need full-bore ball valve, please check the related products in Product Description..
Check Stock