Reviews Plastic Coated Steel Pipe

Upgrade Fish Tape Wire Puller Through Wall Wire Threader Fish plus Fish Cable Fastener with Steel rope 40FT(12M)

  • ⭐【Perfect Flexibility and Rigidity】Unlike fiberglass wire, it will not break if you bend too much, unlike other steel fish tape, it will not curl a lot. Our Plastic-Coated Steel Fish Tape has strong traction, good flexibility, Anti-aging and high temperature..
  • ⭐【Plastic-Coated Steel】With non-conductive plastic-coated construction, the versatile fish cable is applicable for telecom, electrical, wall, floor conduit and other wiring installation. It is the perfect tool to assist you in pulling cables through occupied duct and panel boxes..
  • ⭐【Fish Tape Fastener】Fish tape fastener is used to help fish tape more convenient to use. One side is connected with wire, the red line cap can prevent wire disconnect when pull it. Another side is connected with fish tape, which makes the wire and fish tape connect firmly..
  • ⭐【360°Available Head Wheel】The Head wheel at the end of steel wire is 360° available, much easy to across through the bends. And the unique connection method makes it durable and convenient life..
  • ⭐【Attention】The Fish Cable works great in smaller conduit, but not thicker cables or large pipe..
Check Stock

Libraton PVC Cutter 1-5/8\

  • ...ess aluminum alloy steel. The thick 2.5mm blade used is SK5 material with precision sharped and Teflon coated. Sturdy construction and big size suitable for heavy-duty use..
  • 【Widely Application】The ratcheting PVC cutter is designed up to 1-5/8-inch (42mm) outer diameter capacity ideal for use to cut a variety of plastic pipe and tube(PVC,CPVC,PP-R, PEX, PE, Rubber Hose etc.), It is an essential cutting tool for your home handyman, plumbers, electricians, and vehicle mechanics..
  • 【Efficient Working with Safety】This plastic pipe cutter equipped with ratcheting drive technology and arch angle design to greatly save your strength when cut pipes. The Spring-loaded ergonomic handle provide a reliable grip and powerful bite force improve work efficiency by fast cutting, faster positioning and single stroke cuts. User can cut pipe within 5 to 20 seconds .There is a safe lock in the bottom of PEX cutting tool. You can buckle it when you don't use the cutter..
  • 【Quick Change and Replacement Blade】The PVC cutter is unique designed with Quick Change system. You can quick change the blade replacement easily within 10 seconds without any other tools. Also we provide one EXTRA replacement blade in Set. So you can have TWO blades with our PVC cutter..
Check Stock

DELIXI PVC Pipe Cutter with blade,up to 2-1/2\

  • ✂High quality: The DELIXI PVC pipe cutter body is made of durable hardness aluminum alloy steel. The blade used is SK5 material with precision sharped and Teflon coated.. The surface treatment of Teflon coating can prevent sticking well..
  • ✂Comfortable operation: Ergonomic non-slip handle Anti-slip more smoothly.Long-term use is more labor-saving..
  • ✂Wide range of applications: The ratcheting PVC cutter can help cut all kinds of plastic pipes and pipes such as PVC, CPVC, PP-R, PEX, PE, hose, etc.
  • ✂Highly efficient: This pipe cutter with ratcheting drive technology to greatly save your strength.Make your work more comfortable.
  • ✂After-sales service: Supply a 12month lifetime warranty to this PVC pipe cutter. If you have any questions, please contact us..
Check Stock

DELIXI PVC Pipe Cutter with extra blade, 2-1/2\

  • 【High quality】The DELIXI PVC pipe cutter body is made of durable hardness aluminum alloy steel. The blade used is SK5 material with precision sharped and Teflon coated.. The surface treatment of Teflon coating can prevent sticking well..
  • 【Humanized design】Quick change design, more convenient to replace the blade.Ergonomic non-slip handle is smooth to use.Long-term use is more labor-saving..
  • 【Wide range of applications】The ratcheting PVC cutter can help cut all kinds of plastic pipes and pipes such as PVC, CPVC, PP-R, PEX, PE, hose, etc.
  • 【Highly efficient】This pipe cutter with ratcheting drive technology to greatly save your strength.Make your work more comfortable.
  • 【After-sales service】Supply a 12month lifetime warranty to this PVC pipe cutter. If you have any questions, please contact us..
Check Stock

Ear Hose Clamps Pliers Pincer Crimper Tool with PEX Pipe Cutter for Tube 1/8 inch-1 1/4 inch and 10PCS 3/4-inch, 20PCS 1/2-inch 304 Stainless Steel Clamps

  • Ear Hose Clamps Pliers Pincer with plastic coated handle..
  • PEX Pipe Cutters: Cuts PEX Pipes from 1/8 inch-1 1/4,Spring loaded handle for quick opening/fast cutting. DO NOT use it to cut metallic pipes or cable wire..
  • Common size Stainless Steel clamps : Widely used in hoses and plastic pipes, especially suitable for beverage, automotive, marine, motorcycle, and industrial applications..
  • The kits is constructed of durable high-quality stainless steel..
  • Package Includes: 1pc handle Cinch Crimp tool, 1pc handle pipe cutter, 10 pcs 3/4" and 20pcs 1/2" Clamps set..
Check Stock

Toolman Premium Circular Saw Blade Universal Fit 4\ for Wood and Plastic Cutting STH019

  • Vacuum Brazed technology makes the industrial premium diamond grains permanently brazed to the edge of steel core,creating an unbreakable and extremely heat resistant segments.
  • Both side of core coated with abrasive grains, which provide smooth cutting, and reduce heat generating, it is guaranteed to deliver a better combination of cutting speed and tool life.
  • Out diameter 115mm(4.5"), the incision thickness is approximately 2.3mm-2.4mm, with the arbor of 22.23mm(7/8"), suitable for most of hand-held grinder or trim saw with 7/8" arbor.
  • The core is made with heat-treated hi-speed steel which are guaranteed to withstand the demands of dry and fast cutting, the maximum safe operating speed is 13,300 RPM.
  • Designed to cut through the tough materials, including granite, marble, Aluminum, Auto Body Panels, Cast Iron, Copper Pipe, Corrugated Roofing, Drywall, Ductile Iron Pipe, Fire Door, Masonry, Plastic, PVC, Rebar, Reinforced Concrete, Steel Metal, Stucco, Wood.
Check Stock

AccEncyc PVC Pipe Inside Cutter Kit 1/4\ Hex Shank Plumbing Inside Cutter Internal Plastic Pipe Cutter with 6Pcs Saw Blade

  • PVC Pipe Inside Cutter Kit: Including 3pcs saw blades of 32mm/1.25" diameter, 3pcs blades of 44mm/1.75" diameter, 1/4" hex shank, serrated & flat washers, fasten screws..
  • Heavy Duty & Strong: The quality carbon steel shank features with the high hardness and smooth surface for good handling. Made of strong HHS and coated with the protective oil, the saw blades are durable, sharp, rust & corrosion-resistant..
  • Perfect Cutting: The plumbing inside cutter is not only great for cutting PVC pipe, plastic pipes and wood, but also for some soft metal pipes with the help of coolant or water to cool the hot saw blade..
  • Work Efficiency: This internal plastic ABS pipe cutter is suitable for most electric drills. Small but practical and portable, effective to cutting the PVC pipes from the outside and inside..
  • Safety Precautions: When use this plumbing tool cutter, please wear gloves and goggles to prevent the flying spark. Keep away from children. The maximum speed of the saw blade cannot exceed 20,000 rpm..
Check Stock

Metal Garden Tomatoes Stakes Plastic Coated Plant Sticks Plant Cage Supports Climbing Plant Climbing Frame for Tomatoes, Trees, Cucumber, Fences, Beans, Vegetable Trellis (176 Pieces,16.5 Inch)

  • Package includes:each package contains 36 x plastic coated plant sticks with 42 cm/ 16.5 inch length and 11 mm diameter, 4 pieces A-type connection pipe, 4 pieces B-type connection pipe,12 x connector, 10 x universal buckles, 10 x crossed buckle, that fits to 11 mm stakes, 100 x plant tie.The combination makes you more convenient and quick to use, which can meet your daily planting needs.
  • Easy to install: put the tip of the garden stake down, pointed end allows stakes to be quickly and easily inserted into the soil .The green surface can blend with the plants so that they are not easy to spot. The plant cage support blends into any garden or indoor decor..
  • Durable material: these plant climbing frames are made of steel with a green plastic coating, which are not easily deformed, rust-proof and waterproof.
  • They are stronger and more durable than traditional wooden and plastic ones, and they have a pointed design on one end, so they can be easily inserted into the soil.
  • Long service life: the metal garden stake is covered with a green and non-toxic plastic coating, which can avoid rust and extend the service life. Use any seasons, summer or winter, rainy or snowy days. It can also be applied as a stake for fence.
  • Wide application:the plastic coated pla....
Check Stock

SHDIATOOL 12 Inch Metal Cutting Diamond Blade All Purpose Cut Off Wheel for Rebar Sheet Metal Angle Iron Stainless Steel

  • Vacuum Brazed technology makes the industrial premium diamond grains permanently brazed to the edge of steel core,creating an unbreakable and extremely heat resistant segments.
  • Both side of core coated with abrasive grains, which provide smooth cutting, and reduce heat generating, it is guaranteed to deliver a better combination of cutting speed and tool life.
  • Out diameter 300mm(12"), the incision thickness is approximately 3mm, Bore 25.4mm(1 In.) with pin hole.
  • The core is made with heat-treated hi-speed steel which are guaranteed to withstand the demands of dry and fast cutting, the maximum safe operating speed is 5,059 RPM.
  • Designed to cut through the tough materials, including granite, marble, Aluminum, Auto Body Panels, Cast Iron, Copper Pipe, Corrugated Roofing, Drywall, Ductile Iron Pipe, Fire Door, Masonry, Plastic, PVC, Rebar, Reinforced Concrete, Steel Metal, Stucco, Wood.
Check Stock

SHDIATOOL 14 Inch Metal Cutting Diamond Blade All Purpose Cut Off Wheel for Rebar Sheet Metal Angle Iron Stainless Steel

  • Vacuum Brazed technology makes the industrial premium diamond grains permanently brazed to the edge of steel core,creating an unbreakable and extremely heat resistant segments.
  • Both side of core coated with abrasive grains, which provide smooth cutting, and reduce heat generating, it is guaranteed to deliver a better combination of cutting speed and tool life.
  • Out diameter 350mm(14"), the incision thickness is approximately 3.2mm, Bore 25.4mm(1 In.) with pin hole.
  • The core is made with heat-treated hi-speed steel which are guaranteed to withstand the demands of dry and fast cutting, the maximum safe operating speed is 4,365 RPM.
  • Designed to cut through the tough materials, including granite, marble, Aluminum, Auto Body Panels, Cast Iron, Copper Pipe, Corrugated Roofing, Drywall, Ductile Iron Pipe, Fire Door, Masonry, Plastic, PVC, Rebar, Reinforced Concrete, Steel Metal, Stucco, Wood.
Check Stock