Reviews Pistol Valve
Case Club IWI TS12 & Tavor Rifle Pre-Cut Waterproof Case with Accessory Box and Silica Gels to Help Prevent Gun Rust
- Case fits an IWI TS12 Shotgun, a Tavor Rifle (X95, SAR, 7, or TAR-21), and a Semi-Automatic Pistol.
- Case also holds up to 11 rifle magazines up to 94 shotgun shells, 2 pistol magazines, 2 silica gel canisters (included), a waterproof accessory box (included), and accessories.
- The case accommodates rifle optics, rifle foregrips, shotgun optics, aftermarket buttpads, and either pistol underbarrel attachmnets or small pistol optics (not both).
- Included is a small cutting blade for modifications, a foam divider to separate the top and bottom guns, 2 moisture absorbing silica gels, and a small waterproof accessory box.
- The case does NOT fit side attachments, left handed Tavor Rifles, bipods, side saddles, revolvers, or firearms and attachments that exceed the maximum dimensions.
- Case is Airline Approved for checked luggage, padlockable, wheeled, fully shippable & dustproof, and has an automatic purge valve.
- Foam is closed cell military grade polyethylene that can be wiped clean.
- This product is for the case and foam only. Firearms and firearm equipment are not included.
Check StockCase Club 3 Gun Outdoorsman Waterproof Case Pre-Cut for Rifle, Shotgun, and Pistol with Accessory Box and Silica Gel to Help Prevent Gun Rust
- The case with precut foam fits a Hunting Rifle or Lever Action Rifle up to 49.22" in overall length, a Shotgun up to 49.0" in overall length, and a Revolver or Semi-Auto Pistol up 11.7" in overall length.
- The precut foam also accommodates Rifle and Shotgun Optics, Under-Barrel Attachements, Buttstock Padding/Extensions, and a Shotgun Pistol Grip.
- It also fits Extra Rifle Magazines (in the long accessory pocket), 4 Extra Pistol Magazines, 32 Shotgun Shells, 2 Moisture Absorbing Silica Gels (included), a Clear Waterproof Accessory Box (included), and a lid and base Foam Divider Piece (included).
- The foam insert is (closed cell) military grade polyethylene which can be wiped clean, and the case has wheels for easy transport, is airline approved for checked luggage, has padlock holes, and has a pressure relief valve.
- The case does NOT fit side-by-side double barrel shotguns, side attachments on any of the firearms, or pistol optics..
Check StockPlano All-Weather Double Pistol Case Watertight & Dust-Proof Gun Case for Two Pistols; High Density Pluck Foam, Black; Continuous Dri-Loc Seal
- PLANO ALL WEATHER DOUBLE PISTOL CASE: Defend two firearms from damage and the elements with this hard pistol case. The Continuous Dri-Loc seal provides a watertight, dust-proof shield to protect your gear, even in the most extreme conditions..
- CARRY WITH CONFIDENCE: Constructed with rugged, industrial strength to provide durable reliability and protection during travel or standalone storage..
- AIRLINE APPROVED GUN CASE: Features airline-approved dual-stage latches to ensure secure transport. Padlock compatible. Equipped with a pressure release valve to equalize pressure caused by altitude or temperature changes..
- PLUCK-TO-FIT FOAM FOR EASY CUSTOMIZATION. Interior shell features pre-perforated pluck foam padding, so you can mold the case to the shape of your pistol, handgun or gun accessories to prevent movement and offer optimal protection..
- PRODUCT SPECIFICATIONS: Measurements: 14" L x 10" W x 5" H. Color: Black with Yellow Latches. Double Pistol Capacity: Made in the USA..
Check StockCase Club IWI Tavor TS12 Shotgun Pre-Cut Waterproof Case with Silica Gel to Help Prevent Gun Rust
- Fits IWI Tavor TS12, 1 Semi-Auto Pistol or Snub Nose Revolver, 4 Pistol Magazines, and up to 42 Extra Shotgun Shells (or accessories).
- Includes 1 Hydro-Absorbent Silica Gel to help prevent gun rust and 1 small waterproof Accessory Box.
- Has built-in metal reinforced padlockable holes, wheels, and a manual pressure relief valve.
Check StockPlano All-Weather Pistol Case Watertight & Dust-Proof Gun Case with High Density Pluck Foam
- Plano Gun Cases and Ammo Storage | Protecting your passion since 1952.
- Rugged, industrial-strength construction with dual-stage lockable latches for secure transport | Specs: 10" L x 8" W x 4.25" H | Color: Black w/Yellow Latches | Firearm Capacity: Single | Firearm Type: Pistol.
- Plano All Weather Pistol Cases defend your firearms from damage and the elements - Continuous Dri-Loc seal provides a watertight, dust-proof shield that protects your gear even in the most extreme conditions.
- Pressure release valve equalizes pressure caused by altitude or temperature changes | Airline approved.
- Pre-perforated pluck foam for easy customization | Made in USA.
Check StockEsimen VR Headset Wall Mount Storage Stand Hook for Oculus Quest 2 Grip Game Gun Pistol Case(White)
- ...Three-piece design】Friction lock and needless of a lock pin-Easy to install and remove. Full buttons access will not scratch the device itself. Protect the controllers from being dropped and bumped. Comfortable, durable, and easy to clean..
- ✅【Better VR Experience】 When you play shooter games, your eyes see a pistol but you're feeling a controller, and that disconnects you and makes it less immersive since the native controllers are meant to be "one size fit all" solution..
- ✅【Well-built VR pistol body】when you play with familiar gun feeling with a proper grip and a finger guard designed for shooter games, you can literally feel the direction it is pointing to even if you are blindfolded due to its inertness and balance. This deeper level of immersion becomes available when all your sense aligned to create the best experience possible..
- ✅【Patented Design】Special Designed for Oculus Quest 2 Controllers ( Pls note that the controller was not included);Popular for VR game develop team, VR shop or VR arcade commercial use.Save space for your VR headset and touch controller,Keep your VR headset organized and ready to use at any time.Package:2x Oculus Quest 2 VR Game Gun Case (ONLY),1xWall Mount.
Check StockARCAN PROFESSIONAL TOOLS Pistol Grip Grease Gun with Double Spout Front Output, Air Bleeder Valve, and Bulk Filling Valve, 8000 PSI Working Pressure (ASBGG)
- PISTOL GRIP: For convenient, one-hand use..
- DOUBLE SPOUT FRONT OUTPUT: Allows you to connect a hose to the top or front on the gun..
- AIR BLEEDER VALVE: Quickly removes any excess air that enters the chamber,.
- BULK FILLING VALVE: Pushes grease into the gun without a cartridge..
Check StockCase Club Ruger PC Carbine Pre-Cut Waterproof Rifle Case with Silica Gel to Help Prevent Gun Rust (Gen 2)
- Case holds factory Ruger PC Carbine plus an additional magazine, a semi-automatic pistol, an extra pistol magazine, and has three accessory spots for gear.
- The foam can accomodate rifle optics, but not other rifle attachments.
- Foam insert is (closed cell) military grade polyethylene which is long lasting and can be wiped clean.
- The case comes with 9mm cutting blade for easy foam modifications, which works perfectly with the pre-cut perforations. The case also comes with silica gel to help prevent rust.
- The case is waterproof, airtight, has padlock holes, and a pressure relief valve.
Check StockCase Club PS90 Pre-Cut Waterproof Compact Breakdown Rifle Case (Upgraded Gen-2)
- Holds a broken down FN PS90 or P90 rifle with or without optics, 5 rifle magazines (in the lid) along with a semi-automatic pistol with 2 pistol magazines. Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure..
- Accommodates up to 16" barrels and most optics. Does NOT accommodate side attachments. See image diagram and drawing for fitment information..
- Case has a lifetime warranty, is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Case shell was originally made for laptops making this perfect for discreet travel..
- Pistol cutout accommodates full size, compact & subcompact pistols without under-barrel attachments or optic. Max length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths..
- Wide bodied snap latches can be used with thick gloves. Extended front handle length helps counter balance off cente....
Check StockPowerbuilt 648755 Mini-Pistol Grease Gun
- Extension can be positioned to work at 0 degree or 90 degree.
- Uses standard 3 ounce cartridges or bulk fill and includes 4 inch steel extension and coupler.
Check Stock